Showing 13813–13824 of 19874 results
¥ 4,151.00
Size and weight:
Size: 23173.5 (unit not specified).
Weight: About 1.33kg.
Series:
The SCXI-1163R belongs to the SCXI family of NI (National Instruments).
Features:
High isolation: Optical isolation technology is used to provide high isolation.
Programmability: Serial programming via SCXIbus can be integrated into existing SCXI systems.
Run mode: Runs in parallel mode when connected directly to a plug-in digital I/O device.
Stability: The product features are marked as stable.
¥ 5,124.00
Parameters and specifications:
Model: PXI-7344
Brand: NI (National Instruments)
Number of axes: 4 axes
Position accuracy: up to 1 micron
Speed accuracy: up to 0.01%
Maximum speed: up to 60 rpm per shaft
Rated current: 3 A/ shaft
Number of channels: 4 channels analog output (when used as analog output module)
Output range: ±10 V (unipolar) or 0 to 20 V (bipolar)
Resolution: 16 bits
Maximum update rate: up to 250 kS/s per channel
¥ 4,857.00
Size and weight:
Volume: MC-TAMR04 is 116×69.5×28(mm³) without terminals.
Weight: Net weight is 0.25kg.
Features:
Smoothness: Even under low subdivision conditions, the motor can run smoothly at low speed, with almost no vibration and noise.
Anti-interference ability: photoelectric isolation differential signal input, strong anti-interference ability.
Adaptive motor: Suitable for various types of two-phase hybrid stepper motors with an external diameter of 42mm or 57mm.
¥ 6,235.00
Parameters and specifications:
Model: CFP-AIO-600.
Voltage: 24V.
Current: 100-400A.
Number of channels: 4 analog inputs and 4 analog outputs.
Maximum calculated length: 15,000m (16,400 yd) load of the AF100.
Compliance standards: NIST (National Institute of Standards and Technology) traceable calibration standards.
¥ 4,562.00
Parameters and specifications:
Exchange capacity: 48Gbps.
Forwarding rate: 35.7Mpps.
Number of ports: 16 10/100Base-TX ports
MAC address table: 8K.
Number of vlans: 4K.
Power Supply: AC 100~240V, 50/60Hz (internal).
Power consumption: 35W.
Size and weight:
Dimensions: 17.3 inches x 8.2 inches x 1.7 inches (width x depth x height).
Weight: 6.8 pounds.
¥ 4,157.00
Parameters and specifications:
Main function: Detect a variety of AC or DC signals, from digital logic level signals to 240VAC/VDC signals.
Optical isolation function: avoid ground loop problems and protect the host computer from excessive voltage damage.
Serial programming: Serial programming on DAQ devices via the SCXI bus is easy to integrate into existing SCXI systems.
Maximum transfer rate: 460.8kb /s.
Operating voltage: ±10 V.
Storage: 512 MB.
¥ 4,527.00
Parameters and specifications:
Rated voltage: AC 230/400V.
Rated current: 38A.
Contact form: 3NO+1NC.
Control mode: coil control.
Connection mode: bolt connection.
Installation method: guide rail installation.
Protection level: IP20.
Certification standard: IEC.
¥ 4,155.00
Parameters and specifications:
Transfer rate: up to 12 MBd.
Number of slave stations supported: A maximum of 126 slave stations are supported.
Physical port: RS485.
Electrical isolation: Yes.
Onboard shared memory: 256 KB
Power input: DC(9-36)V wide power input.
IP protection level: IP30.
Relay alarm output: Yes.
Dual power redundancy and isolation protection: available.
¥ 6,205.00
Features:
High-speed processing: Provides high-speed Boolean and non-Boolean processing functions.
Communication capability: Two built-in Ethernet ports support 10/100 Mbps transmission speed, automatic sensing function, and can communicate via RS485 communication interface.
Programming support: User programs developed using a variety of programming software applications are accepted, such as VersaPro 2.03 or later, CIMPLICITY Machine Edition Logic Developer 2.60 or later, etc.
Modular design: A single slot width that can be installed on a 90-30 PLC rack.
¥ 6,025.00
Series:
EHDB280-21-11 is an ABB product model that may belong to a specific ABB product family, but the specific family name is not explicitly mentioned in the search results.
Features:
Communication capability: EHDB280-21-11 provides two effective communication ports that support DeviceNet and the RS-485-based DF1 protocol.
Display function: Display three-phase current and three-phase voltage readings at the same time.
Materials: Display modules use non-brominated, FDA-approved plastics for applications such as pharmaceutical, food processing and control room fire protection requirements.
Connectivity: Multiple analog and digital I/O connections with Rockwell Automation.
Memory: Has large capacity non-volatile memory.
¥ 4,165.00
Size and weight:
The exact size and weight may vary from model to model or manufacturer. For example, some descriptions mention that CE10560 weighs 2KG.
Series:
The CE10560 may be a model in a product range from KOLLMORGEN or another manufacturer.
¥ 5,269.00
Series:
The UAC383AE01 belongs to a family of ABB products, but the specific family name is not explicitly mentioned in the search results.
Features:
Versatility: Supports a variety of communication protocols and interfaces for easy connection and integration with other devices.
Flexibility: Provides a wide range of software modules and configuration options for customers to quickly build and deploy business logic.
High performance: With high performance processor and memory, it can automate the control of the entire machine.
Reliability: It has advanced control algorithm and fault diagnosis technology to ensure the stable operation of the system.
