argument
Processor architecture: Pentium M microprocessor
Main frequency: 1.6GHz (some data mention 1.8MHz, but it may be a clerical error, because MHz and GHz are far different)
User memory: 64 MB
User flash: 64 MB
Rated voltage: Multiple voltage ranges, including 5V, 12V, 24V and -24V DC
Load requirements: 8.5 amps at 6V DC, 12.12 amps at 0V DC and -0.03V DC (6.8 amps at 5V DC, 0.003 amps at 12V and -12V DC, according to another source)
specification
Series: RX7i PACSystem (Some sources mention RX3i PACSystem, but this may be early information)
Communication interface: Ethernet, serial communication (including RS-232 and RS-485)
Rack backplane design: supports the VME64 standard format
Firmware upgrade port: Three separate and isolated serial ports, two of which are used to upgrade firmware or create serial interfaces with external devices, and the third is a station management port for Ethernet interfaces
Operating temperature range: -40℃~ +85℃ (some data mentioned -25 ℃~ 70℃, but this range may be suitable for specific environments or versions)
Input voltage: 5VDC (another reference to the input voltage range of 10~30VDC, may refer to the supply voltage range)
Power consumption: 10W (another source mentions an output power of 360W, which may refer to the power consumption of the entire system or device, rather than a single module)
Network transfer rate: 43 Mbyte/s(4-byte packet) to 170 Mbyte/s(64-byte packet)
The IS200TRPGH1B is part of the General Electric (GE) Mark VI series.
The board supports the data transfer instruction MOV(21) and the data reverse transfer instruction MOVN(22), which provide flexible options for data transfer. When the state before MOV is ON, MOV instruction is executed to transfer the source data to the target channel; When the state is OFF, the MOVN command is executed to reverse the source data and send it to the target channel.
The circuit board also has the setting and resetting function of the carry marker relay 25504, which is very important for the execution of addition and subtraction operations to ensure the correct calculation results.
argument
Model: PFTL101A 0.5KN
Measuring range: 0.5KN (i.e. 500 Newtons)
Accuracy: High precision measurement, simulation accuracy up to ±0.03%
Interface: Analog input/output interface
Supply voltage: for example, +24V/2A (may vary by application)
specification
Type: load cell
Series: PFTL series
Versions: include standard PFTL 101A/B, as well as PFTL 101AE/BE for dry areas of paper machines and PFTL 101AER/BER for wet ends of paper machines
dimension
Size: 20011050mm in one description
weight
Weight: Approximately 2KG
series
Belonging to the PFTL series, the sensors are available in a variety of models and versions for different industrial environments and application needs
