Frequency: There are different statements, there is a mention of 1.6 GHz, there is also a mention of 1.8 MHz, but considering the unit difference between MHz and GHz, 1.8 MHz may be a mistake, more likely 1.8 GHz. In addition, it is also indicated that the rated frequency is 1800 MHZ (1.8 GHz).
Memory: Equipped with 64 MB of user memory and 64 MB of user flash memory.
specification
Voltage and current: Load requirements are 8.5 amps at 6 volts DC and 12.12 amps at 0 volts DC and -0.03 volts DC. It is also stated that the load is 6.8 amps at 5 volts DC and 0.003 amps at 12 volts DC and -12 volts DC.
Communication interface: including Ethernet interface and multiple serial ports (such as RS-232, RS-485). These ports are independent and isolated and can be accessed from the connector on the front of the CPU.
Rack-mounted backplane design: allows communication between the IC698CPE040 and input/output and intelligent option modules in the VME64 standard format.
Processor: Based on the MPC7455 or MPC7457 1GHz CPU, it provides powerful processing power.
Memory: Equipped with 512MB ECC SDRAM memory to ensure high-speed data transmission and stability.
Cache: May have 512 KB on-chip L2 cache and 2 MB level 3 cache (may vary depending on the model).
specification
Communication capability: Supports Gigabit E-NET connectivity, providing high-speed and stable network communication capability.
Interface: Dual Peripheral Component Interconnect (PCI) and PMC(Peripheral Component Interconnect) interfaces for easy connection and expansion with other devices.
Operating system and development tools: Support a variety of operating systems and development tools, easy for users to develop and maintain.
Communication speed: CH1 communication speed is supported and can be selected between 10 Mbps and 100 Mbps, these speeds are defined in the IEEE 802.3u 10/100 Base-Tx standard.
Power Supply: 24VDC power supply is received through the CEX bus and its current consumption is up to 250 mA. Under typical operating conditions, the power consumption is 3.8W and the maximum power consumption is 6W.
Communication protocol: Support PROFINET IO communication protocol, which is a widely used in the field of industrial automation Ethernet communication protocol, can achieve efficient and stable data transmission.
specification
Protection Class: According to EN60529 and IEC 529, the module is rated IP20 (but please note that information indicates IP30), which means that it has some dust and water resistance, but it is not suitable for harsh industrial environments.
Parameters and specifications
Purpose: Used to provide control level power supply for drivers and cabinet fans.
Operating voltage: The input voltage range may include 85~264VAC and the output voltage is 24VDC.
Output power: 360W.
Maximum output current: 15A.
Operating temperature range: -25~70℃.
Size and weight
Dimensions: Approx. 115mm x 48mm x 150mm
Weight: About 1.2kg
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts
Operating temperature: between 0 and 65 degrees Celsius
Communication interface: Contains multiple female jack connectors, one USB port, and supports Ethernet connection
specification
Design: Individual boxed assembly, front panel allowing connection communication, rear edge with two screw mounting, three side grille openings allowing air flow, designed for base mounting in cabinet
Cooling method: Natural cooling, no fan required
Application level: complies with NFPA Class 1 zone 2 specifications
Memory: 64 MB, of which 51.389 MB is available for applications and 4 MB flash memory for firmware storage
Power supply: 24 volts DC (19.2 volts -30 volts DC)
Power consumption: At +24 V, the power consumption is 210/360 mA and the power dissipation is up to 8.6 watts
specification
Communication interface: Has two RJ45 Ethernet ports and two RJ45 serial ports, one serial port with modem control signal, the other is isolated, mainly used to connect configuration tools
Support for CPU redundancy: including CPU, CEX-Bus, communication interface, and S800 I/O for higher availability
Interface extension: Has a CompactFlash interface and other possible expansion slots for adding more functional modules
Size and weight
Size:
Dimensions for independent use: width 130mm, height 130mm, depth 190mm (insert depth <250mm after all cables are connected)
19-inch rack mounting dimensions: Front panel 3 height units (U), 21 width units (HP), total width <26 width units (HP), including heat sink insertion depth <250mm
argument
Voltage: 24VDC (input voltage)
Current: May vary depending on the application, but generally has a wide current range
Operating voltage: +5V DC, ±10%, maximum 200mA
Temperature range: +0°C to +60°C
Humidity: Maximum relative humidity up to 95% (non-condensing)
specification
Input/Output (I/O) : Typically has 8 inputs and 6 outputs, but the I/O configuration is very flexible and can be scaled up to 142 I/O points
Program storage: Flash EPROM program memory that supports 8K steps
Data storage: 8K word data storage, can store a large number of program data and configuration information
Size and weight
Size: Different sources give different size information. One way to say it is 100 mm x 70 mm x 30 mm, another way is 250 x 190 x 180mm³. This may be due to differences between different models or versions.
Weight: Depending on the source, the weight may be 0.5 kg or 2KG.
