Parameters and specifications
Type: Control master card module, used for control and monitoring tasks in industrial automation systems.
Function: Process and execute complex control algorithms and logic to achieve accurate control and monitoring of industrial control system.
Processor and chip: The use of high-performance processors and dedicated control chips, with powerful processing power and computing power.
Input/output capability:
For IS200WETBH1BAA, it is a 15-bit differential current module with eight channels of analog input.
For IS200WETBH1BAC or similar models, a variety of interfaces and communication functions may be supported, including digital input/output interfaces, analog input/output interfaces, and communication interfaces (such as Ethernet, serial ports, etc.).
Programmability: Support programmable functions, users can use common programming languages and development environments for program development and customization.
argument
Input signals: A variety of input signals may be supported, including pulse inputs.
Resolution: 16 bits.
Accuracy: 1,000 Hz to 20,000 Hz, ±0.01%.
Update rate: 25 ms, typical value.
Impedance (load) : Typical value 20 KW.
Common model range: -100 VDC to +100 VDC peak-peak value.
Normal mode range: 1.5V to 200 V peak peak value.
Overrange protection: 150VDC, continuous.
Lag: 150 millivolts, typical.
Current range: 0-20 MA
argument
Input signals: Multiple input types are supported, including eddy current sensor input, speed, acceleration, and dual probe (speed and displacement) input.
Resolution: up to 24 bits, provides low noise levels.
Frequency response: Small operating frequency to 1 kHz (60,000 cpm).
Sensitivity: 20mV/mm/s (500 mV/in/s) ±5% at 100 Hz (6,000 cpm).
Power consumption: 7.7 watts (3500/42M for another configuration, may vary).
Shaft power supply: -24VDC.
Inverter power supply: -24VDC.
specification
Product type: Proximitor Seismic monitoring I/O module.
Measurement range: Support a variety of measurement ranges, users can choose the appropriate measurement range according to actual needs.
Multi-channel monitoring: Configurable 4-channel monitor module that can monitor multiple parameters simultaneously.
High precision measurement: Excellent linearity and low drift ensure accurate measurement results over a wide dynamic range.
effect
Provide professional solutions for Marine steering gear control to ensure navigation safety and reliability.
2. WCC600 controller in the field of industrial automation (may refer to a general or specific brand model)
Parameters and specifications
High performance: advanced control algorithm and efficient hardware architecture.
High reliability: Using high-quality components and rigorous manufacturing processes.
Easy integration: Supports multiple communication protocols and interfaces.
Rich functions: such as logic control, motion control, process control, etc.
argument
Interface type: PCI
Maximum transfer rate: 1.5 MB/s
Number of supported devices: 14
Power requirements: 5VDC, 1A
specification
Brand: NI
Model: GPIB-140A 186135F-31
Product type: GPIB interface card
Ambient temperature: room temperature (may vary according to specific application scenarios)
Size and weight
Size: 120mm x 80mm x 20mm (from [1])
argument
Power supply: May include AC50V to 80V or DC70-110V (for drives), and 24VDC or 125VDC (for analog input modules).
Output current: Current 7.8A/ phase (can be set by panel code switch, for driver), maximum output current may reach 10A (for analog input module).
Insulation resistance: >500MΩ at room temperature (for the driver).
Communication protocol: May support Modbus, Ethernet, OPC, etc.
specification
Working environment: Ambient temperature 0°C ~ +50 °C, humidity <80%RH (no condensation, no frost), try to avoid dust, oil mist and corrosive gases.
Control functions: The driver may support speed control, position control, and communication via CAN2.0B.
argument
Number of counters/timers: 8
Number of digital I/O lines: 40 (TTL/CMOS compatible)
Maximum source frequency: 100 MHz
External source frequency: 80 MHz
DMA transfer tasks: Three high-speed DMA transfer tasks can be performed simultaneously
specification
Hardware configuration: 8 32-bit counters/timers and 40 TTL/ CMOS-compatible digital I/O lines
Software support: NI-DAQmx driver software, the use of X series NI-STC3 timing chip
Performance Parameters: High-performance timing and digital I/O capabilities for a variety of complex industrial automation and test needs
series
The PCI-6612 belongs to the PCIe series of data acquisition and test devices of National Instruments (NI).
argument
Input current: 500mA
Output voltage: 24VDC
Output power: 360W
Input voltage range: 85~264VAC
specification
Number of channels: 16
Operating temperature range: -25~70℃
Storage temperature range: -40 ℃ to 85℃
Power supply: Support 115-220V interface and quantity of original factory standard, support Hot-Plug
Power supply and protection: dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function
argument
Voltage: 24V DC
Current: 60 mA
Output frequency: 50Hz
Range: 110-221 (automatic voltage regulation)
Drive current: adjustable from 0.0A/ phase to 3.0A/ phase
Control accuracy: ± 0.5 ° C (displayed as ± 1 ° C)
specification
Overall dimensions:
253232mm (one size)
25x136x92mm (another specification)
Color: Standard
Weight:
0.12 kg (one size)
0.3kg (another size)
Parameters and specifications
Model: 8V1090.00-2
Operating voltage: 3×400-480V (different sources may vary slightly, but mainly concentrated in the 3×400-480V range)
Rated current: 8.8A
Rated power: 4kW
Integrated features: line filter, brake resistance, electrical safety restart suppression
Position proportional gain: The larger the set value, the higher the gain, the greater the stiffness, and the smaller the position lag
Position feedforward gain: The larger the value, the smaller the position lag, but may make the system position unstable, prone to oscillation
Output torque limit: The internal torque limit of the servo motor can be set, expressed as a percentage of the rated torque
