System environment: normal temperature
System capability: Powerful
Operating system: PLC system
System function: programmable
Product certification: original factory certification
specification
Type: Control panel, Display panel
Brand: ABB
Model: PP826
Color: White
Features: Safety
Size and weight
Size:
The sizes are 6.4 “, 8 “, 10.4 “, 12.1 “, 15 “series
EtherCAT communication module size: 89x77x17mm(CAN)/103x71x17mm(CAT)
Weight:
2KG
argument
Rated input: 0 ~ 20 kAac
Rated output: 0 ~ 20 mAdc, 0 ~ 5 Vdc, 4 ~ 20 mAdc
Accuracy: Level 1.0
Linear range: 0 ~ 120%
Isolated voltage: 5000 Vdc/1 minute
Auxiliary power supply: +12 Vdc, ±12 Vdc, +24 Vdc
Operating temperature: -20℃ ~ +60℃
specification
Type: excitation control module
Brand: BASLER ELECTRIC
System function: Normal
Size: 36*42mm (some information sources) or 56 * 52 * 32mm (another information source)
Input voltage: 100-240V AC, single phase
Input frequency: 50/60Hz
Output voltage: 24V DC
Output current: 40A
Power: 960W
Efficiency: > 87%
Ripple and noise: < 200mVpp
Operating temperature: -20°C to 70°C
Storage temperature: -40°C to 85°C
specification
Enclosure protection class: IP20
Mounting method: DIN rail mounting
Size and weight
Weight: 2KG or 1.60kg
Outer diameter: Suitable for various types of three-phase hybrid stepper motors with outer diameter of 86-130mm
Power requirements: Although this parameter is not explicitly stated in the documentation that directly refers to the VME162PA-344SE-2G, typically such devices will require a stable power supply.
specification
Type: Equal Angle constant torque subdivision driver
Internal circuit: The circuit similar to the servo control principle makes the motor run smoothly at low speed, almost no vibration and noise, and the torque of the motor is much higher than that of the two-phase and five-phase hybrid stepper motor at high speed
Volume: 200x156x90(mm3)
Net weight: 1.6kg
Phase memory function: The driver automatically remembers after the input pulse stops for more than 5 seconds
Size and weight
Size: 200x156x90(mm3)
Weight: 1.6kg
Sensitivity: There are a variety of sensitivities to choose from, and specific values may vary by model and configuration
Output signal: provides a voltage signal proportional to the vibration speed
Applicable temperature: Wide range from -35 ° C to +380 ° C
Protection level: IP 55 or IP 65
Explosion-proof class: EEx ib II B/II C
specification
Type: Shaft vibration sensor
Brand: EPRO
Weight: Approximately 2KG
trait
High sensitivity: Able to accurately measure shaft vibration and capture small vibration changes
Wide measuring range: suitable for different types and sizes of rotating machinery
Robust construction: allows installation in hazardous environments, such as high temperatures
Applications: Used in the chemical and petrochemical industries to monitor and control parameters such as temperature, pressure, flow and level in reactors, separation equipment, storage tanks, etc.
Protection level: IP20.
Voltage: 24V.
Current: 100-400A.
Time-position calibration coefficient: varies according to the size and geometry of the delay line, such as DLD40, DLD80, DLD120, etc., with different vo values (in mm/ns).
specification
Color: Black.
Specifications: 121212
Processing customization: No.
Size and weight
Dimensions: 23cm x 2.92cm x 31cm (L x W x H).
Weight: 2KG.
Processor: 2.3GHz quad-core Intel Core i7-3610QE processor (Max 3.3GHz in single-core Turbo Boost mode)
Memory: 4 GB (1 x 4 GB DIMMs) dual-channel 1,600 MHz DDR3 RAM is standard, expandable up to 16 GB
System bandwidth: up to 8 GB/s, some say 2 GB/s, which may depend on the specific configuration or version
Slot bandwidth: 4 GB/s in standard configuration, some say 2 GB/s
specification
Type: PXI Express controller module
Manufacturer: National Instruments (NI)
Software support: Compatible with LabVIEW, LabVIEW Real-Time and other NI software platforms
Size and weight
Dimensions: 115mm x 48mm x 150mm
Weight: About 1.2kg
Digital I/O: 32 lines
Operating temperature range: -40℃~ +85℃
Input voltage: 5VDC
Power consumption: 10W
Network transfer rate: 43 Mbyte/s(4-byte packet) to 170 Mbyte/s(64-byte packet)
VME transfer rate: 40 Mbytes
Memory capacity: 64 Mbyte or 128 Mbyte SDRAM reflected memory
specification
Size:
6U VMEbus form factor (some sources)
96mm x 48mm x 16mm (another source)
36.3cm×19.6cm×20.6cm (control module size)
Weight:
200g (some sources)
Approx. 1.2kg (another source)
1.26 kg
trait
Compact and withdrawable design: Redesigned from the ground up to unlock the full potential of the IEC 61850 standard for easy communication and interoperability.
Integrated protection, control, monitoring and management: a compact and versatile solution for public and industrial power distribution systems.
A wide range of protection and control functions, including directional overcurrent, non-directional overcurrent, ground protection, voltage, frequency and power quality protection and measurement functions.
Highly sensitive and selective multi-frequency admittance ground protection combination: Advanced and fast short-circuit and ground fault location for selection.
Communication protocols: IEC61850, IEEE 1588 v2, Modbus, DNP3, IEC 60870-5-103 and other communication protocols are supported.
argument
Model: ACS880-01-156A-5+D150+N5050+N8015
Power range: Typically the ACS880-01 series ranges from 0.55kW to 250kW, but specific models (such as 156A) may be in this range.
Voltage and frequency: Usually suitable for three-phase AC, rated voltage and frequency may vary depending on the specific configuration.
Output current: For the 156A model, the output current is related to the motor power and voltage, the specific value needs to refer to the detailed technical specification sheet.
Control mode: With direct torque control (DTC) as the standard configuration, it can easily control almost all types of AC motors.
specification
Brand: ABB
Series: ACS880-01 series
Type: Wall-mounted single drive inverter
Application: General purpose, especially suitable for applications such as fans and pumps
Input/output channels:
20 AI/AO/DI/DO channels, including current, voltage, PT100 or Potentiometer input (AI), current or voltage output (AO, channels 1 to 16 only), no potential or Namur input (DI), high voltage side driver output (DO)
4 relay output channels
8 AI/AO channels, ±10V
Serial line interface: Seven universal RS-232/422/485 serial line interfaces, two of which are isolated
Network interface: Dual Ethernet LAN interface (10BASE-T/100BASE-T)
Bus interface:
Single serial process Bus (SPBus) interface
Dual CAN bus interface (adapter card required)
Dual Profibus interface (adapter card required)
Power consumption: Low power consumption, typically 20 W
specification
Brand: KONGSBERG
Model: RCU510
Type: Marine Module, input/output controller
Size and weight
Size:
Height: 355 mm
Width: 158 mm
Depth: 87 mm
Weight: 1.35kg
