Processor: An 800 MHz ARM Cortex A8 processor with powerful processing power.
Memory capacity: 4 GB eMMC Flash memory and 512 MB DDR3 RAM for fast response to control commands.
Operating system: Support ABB’s own operating system Trio OS or Linux operating system.
Communication protocols: Support a variety of communication protocols, including Modbus RTU/TCP, IEC 60870-5-101/104, DNP3, OPC UA, etc., to facilitate communication with different types of devices.
I/O ports:
Number of digital input/output ports: Supports a maximum of 32 DI/ DOS.
Number of analog input/output ports: Up to 8 AI/ AOs are supported.
The number of DI/DO or AI/AO can be expanded through the PM8M22 or PM8M26 expansion modules.
Parameters and specifications
Series: Belongs to the Mark VI series.
System: Suitable for gas/steam turbine management systems.
Input voltage: Receives 125V DC voltage from the power distribution module (PDM).
Output voltage: The voltage required to convert to EX2100 excitation control, such as +5V DC, 15V DC, and 24V DC.
System composition: The EPSM consists of two main parts, namely a buck regulator and a push-pull inverter.
Size and weight
Weight: About 0.12 kg
Power supply: The system power supply voltage range is 20 to 32 volts DC (Vdc), and the working output/field voltage range is 18 to 60 volts DC.
Output capacity: Up to 40 field devices can be connected.
Independent Power pack: Contains 8 outputs with 5 independent power packs per output for greater flexibility and control.
Processor: Built-in 32-bit ARM processor.
Memory and storage: Has 512 MB RAM and 2 GB Flash memory.
Ports: Provides communication ports such as Ethernet ports, RS232 ports, and RS485 ports.
Protection mechanism: Automatic overcurrent protection (per channel), no need for external fuses, and 2500V pulse resistant photoelectric isolation barrier.
Incident reporting: Support for on-board Incident Sequence (SOE) reporting with a resolution of 1ms to help quickly locate problems.
Input voltage: 24VDC (Some data indicate that the output voltage is -0.6V DC, but this usually refers to signal output, not power input)
Voltage range: 220VDC May be supported (in some application scenarios)
Current: Depending on the data, its current parameters may be different, such as 100-400A or 5A, but the latter may refer to some specific current requirements inside the module, rather than the rated current of the module itself.
Accuracy: In some application scenarios, its accuracy may reach 0.1-0.5.
Operating temperature: 0~55℃, but there are also data that it can work in the range of -20~100℃, which may refer to the operating temperature range of different models or configurations.
Size and weight
Dimensions: 166mm x 112mm x 36mm.
Weight: Depending on the data, it may weigh about 2KG or 375g
Processing power: It has 600 MHz processing power and uses a Pentium-M microprocessor.
Storage capacity: Includes 64 MB of user memory and 64 MB of user flash memory.
I/O capability: Up to 32K bits of discrete I/O and 32K words of analog I/O can be accommodated.
Communication interface: with two Ethernet communication ports, support SRTP, Modbus TCP server and client, Ethernet global data (EGD) and other protocols; There is also an RS232 port, an RS485 port, and a station manager port.
Parameters and specifications
Display: 320 x 240 pixels, 64K color, transmission color STN-LCD
Pixel density and color: provides a clear, vibrant display, suitable for use in industrial environments
Ambient temperature: At +25°C, the CCFL backlight life exceeds 75,000 hours
Interfaces: Include at least 2 USB interfaces and possibly EtherCAT communication (CoE protocol)
Size and weight
Size: There are two possible sizes, 89x77x17mm for the CAN model and 103x71x17mm for the CAT model
Weight: about 2KG
trait
User-friendly: Intuitive and ergonomic design makes operation more convenient and efficient.
Space saving: The slim size design helps to save installation space.
Parameters and specifications
Charging current: 1A Max
Discharge output: 5V/1A
Efficiency: 91% (input 3.7V, output 5V/1A)
BAT discharge termination voltage: 2.9V
Optional charging voltage: 4.2V/4.35V
Max standby current: 25uA
Size and weight
Package format: SOP16
series
A range of single-chip solutions designed for mobile power supplies.
