Communication protocol: Support Modbus slave station, Modbus master station or serial I/O port. For certain versions, CCM slave ports and DNP3 master or slave ports are also supported.
Number of ports: There are eight independent and isolated serial ports on the module.
Baud rate range: from 1200 to 115.2 thousand baud.
specification
Size: 20.6cm×19.6cm.
Power requirements: 0.7 amps at 3.3 volts DC, 0.15 amps at 5 volts DC.
Size and weight
Size: 20.6cm×19.6cm.
Weight: Specific weight information is not explicitly mentioned in the search results provided.
Size: The size of GE IC695CPL410 is about 170mm×115mm×164mm.
Operating voltage: The operating voltage range of GE IC695CPL410 is usually between 220v and 380v.
Operating temperature: -30°C to 60°C.
Size and weight
Dimensions: As mentioned above, approximately 170mm×115mm×164mm.
Weight: Specific weight information about the IC695CPL410 is not explicitly mentioned in the search results.
Number of channels: 8 channels
Voltage range: 0 to 10V
Signal type: Analog signal
Response time: 10 microseconds
Accuracy: 0.1%
Operating temperature: -20℃ to 70℃
specification
Dimensions: 120 mm x 100 mm x 40 mm
Weight: 0.2 kg
Processor: Based on the high-performance Intel Xeon E3-1515 processor.
I/O ports: Includes two Thunderbolt 3.0 ports, two Display ports, two USB 3.0 and four USB 4 ports, two Ethernet ports (one of which is 1588 enabled), serial and GPIB ports.
System support: Run Windows 10 applications to interact with external PCI-based instruments.
specification
Size: Specific size information about the NI PXIe-8861 is not explicitly mentioned in the search results.
Weight: Approximately 8kg.
High density: The 16-bit, 64-channel design makes it suitable for applications such as high density excitation-response testing and open loop simulation
Analog output: Provides analog output signals for the PXI system
Digital trigger: Supports digital trigger function and can be synchronized with other PXI devices
Multi-function: In addition to analog output, it also includes digital I/O lines, counters/timers and other functions
Scalability: The PXIe synchronization capability can be coupled with other data acquisition, motion, and vision products to build highly customized measurement solutions
Interface type: 100/1000BASE-T1 Unshielded Twisted Pair (UTP) automotive Ethernet interface
Number of ports: 4 ports
Application: Application development with NI-XNET driver
specification
Maximum number of connections: Up to four independent endpoints or up to two network terminal Access Points (taps)
Timestamp feature: Has an onboard hardware timestamp that can be used as up to four independent 802.1AS master or slave stations
Front panel function: The front panel is equipped with leds for monitoring network connectivity and activity
Processor: MPC7457 PowerPC, running at 1.267 GHz
Memory: Up to 2GB of on-board DDR ECC memory
Flash: 128MB flash
Bus performance: The VME bus transmission rate is 320MB/s
specification
Dimensions: 170mm x 105mm x 32mm
Interface: Two 33/66/100 MHz PMC-X interfaces
Network: Dual Gigabit Ethernet interface
Processor type: Probably a 32-bit processor based on the ARM kernel
Storage: 32M large capacity flash memory chip
Input signal: can accept standard current, standard voltage, thermocouple, thermal resistance and other signals
specification
Size: 5.00 x 3.00 x 1.38 inches
Weight: 2KG
trait
Display function: 5.1-inch 240×128 dot matrix graphic LCD display, LED backlight
Signal detection: It can detect, record, display and alarm 8 signals at the same time
Data storage: A large-capacity FLASH flash chip is used to store historical data and supports long-term data storage
Communication interface: Supports a variety of communication interfaces, such as Ethernet, serial port (RS-232, RS-485), etc
Size: The exact size may vary from version to version or manufacturing lot, but a common specification is 190 mm x 285 mm x 102 mm
Weight: The specific weight information is not mentioned in the information I have, but usually the weight of this module is moderate to adapt to different installation environments.
trait
High reliability: It can operate stably for a long time under various harsh industrial environments
Precise control: With accurate control ability, it can achieve fast and accurate adjustment of current
Wide range of applications: suitable for power, energy, transportation, construction and other industrial fields
Advanced control algorithm and circuit design: can achieve fast and accurate control response to meet a variety of complex application needs
Rated voltage: 250V
Rated current: 36A
Rated short-circuit power off capacity: 25KA
specification
Shell material: Aluminum alloy
Installation method: guide rail installation
Size: 300mm x 80mm x 65mm
Size and weight
Dimensions are given in the specification section.
Weight is not explicitly mentioned in the search results you provide, but usually the weight of this type of device will vary based on its material, size and functionality.
Voltage: Usually 220V or 24V
Current: The exact number depends on the model and application, but is usually 5A
Resistance: 5 Ohms
Output frequency: Possible 230Hz
specification
Size: The exact size varies from model to model, but is usually a modular standard size for easy installation on a variety of guides
Weight: Approximately 0.57 pounds or 2KG
