Processor:
The Artesyn MVME7100 is likely to feature an MPC864xD processor with a 1.3GHz system-on-chip, dual-core e600 processor.
The MOTOROLA MVME7100 is likely to feature a 1.3GHz PowerPC 604e processor.
Memory:
DDR2 ECC memory up to 2GB.
The MOTOROLA MVME7100 may have a memory range of 1 GB to 4 GB.
Storage:
128MB NOR flash, and optional 2GB, 4GB or 8GB NAND flash.
Interface:
May include Gigabit Ethernet ports, VMEbus, RS-232, RS-485 and other communication interfaces.
USB 2.0 controller for integrating cost-effective peripherals.
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Monitoring gas: hydrogen (H2), carbon monoxide (CO), acetylene (C2H2), ethylene (C2H4), etc
specification
CPU: 32-bit RISC processor
Operating temperature: Operating temperature -20°C to +50°C, storage temperature -40°C to +70°C
Ambient humidity: 5% to 95% relative humidity (no condensation)
Input voltage:
For the DC version, the input voltage is usually 220VAC.
For other types of controllers, there may be different voltage requirements, such as 24VDC.
Output voltage:
The output voltage of the DC supply version is 0-10VDC.
Output power: 800W (DC version).
Current: 100-400A (some information mentioned, but may be specific to specific application scenarios).
specification
Working temperature:
The operating temperature of the DC power supply version is -10℃ to +45℃.
System power supply voltage range: 20 to 32V DC
Field voltage range: 18 to 32V dc
Output voltage measurement range: 0 to 32V DC
Maximum withstand voltage: -1 to 40V DC
Rated output current (continuous) : 2A per channel per power pack for a total maximum output current of 8A
Maximum capacitance: Pre-release 3.5:30-55uF
Minimum on-state load current: 50mA
For servo driver versions, the output frequency may vary according to application requirements, but generally has a high dynamic response capability.
Accuracy: For pressure sensor versions, high precision is available to ensure accurate pressure measurement results.
specification
System environment: normal temperature.
System capability: Temperature control
Operating system: PLC system
Specially designed to control the speed, position and torque of the motor.
Performance: May have high-speed, high-precision control performance to meet the needs of precision motion control.
Communication protocols: Support a variety of communication protocols, such as EtherCAT, Profinet, etc., can easily connect and communicate with other devices.
specification
Model: S72402-NANANA (may include suffix such as -NA-225).
Series: Servo drive series belonging to Kollmorgen.
Output: NA indicates that the output of the driver has a neutral line.
Support Ethernet /IP protocols, and can be converted to the Siemens S7 protocol.
DATA mapping: Use the DATA MAP section in ProSoft Configuration Builder to copy data between regions of the gateway’s internal database, copying up to 100 registers per data mapping command and configuring up to 200 separate copy commands.
Connection capability: Supports Type 3 server connections 5, Type 3 client connections (connected :2, disconnected :1), type 1 I/O connections 2, and I/O connection size 248/248.
Number of registers: Up to 10,000 16-bit registers can be used to exchange large amounts of data.
Motor management relay
Power module (in some cases)
Controller (in specific application)
Programmable logic controller plug-in library (in a specific software environment)
Input voltage:
For motor management relays, control power HI = 70 to 265 V AC, 48 to 62 Hz
For the controller, the input voltage is 24 VDC
Output frequency: May have a high output frequency to meet the need for fast response.
Control accuracy: Advanced control algorithms and technologies are used to achieve high-precision position, speed and torque control.
Integration: Integrates multiple functions such as power supply, controller and motor drive in one, reducing system complexity.
Control mode: PID control, fuzzy control, adaptive control
Input signal: analog (0-10V, 4-20mA), digital (ON/OFF)
Output signal: analog (0-10V, 4-20mA), digital (ON/OFF)
Control accuracy: ±0.1%FS
Communication interface: RS485, Modbus, Profibus
Supply voltage: AC220V/DC24V
Operating temperature: -10℃~+55℃
