Showing 19813–19824 of 24500 results
¥ 4,326.00
Parameters and Specifications :
Type : Network Interface Module (NIM)
Communication Protocol : PROFINET (May support other protocols depending on configuration)
Number of Ports : Typically 2 Gigabit Ethernet ports
Data Rate : Up to 1000 Mbps (Gigabit Ethernet)
Power Supply : Redundant DC power supply (Exact voltage range may vary)
Environmental Protection : IP30 or similar rating
Dimensions and Weight :
Dimensions : Approximate dimensions may vary depending on mounting hardware.
¥ 6,235.00
Parameters and Specifications :
Supported Bus Protocol : PROFIBUS DP1
Data Transfer Rate : Up to 6 Mbps1
Node Address Range : 0 to 2551
Number of Supported I/O Modules : Up to 242
Operating Temperature : 0°C to +60°C1 2
Protection Class : IP651 2
Input Voltage : 24VDC (For certain models)2
Maximum Load Current : 2A (For certain models)2
Communication Protocol : DeviceNet (For certain models)2
¥ 6,032.00
Parameters and Specifications :
Processor : Xilinx Zynq-7020 SoC1 2 3
Memory : 512 MB DDR3 SDRAM (DRAM), 1512 MB Nonvolatile Memory1 3
Storage : 2 GB SLC NAND Flash2
Processor Speed : 667 MHz1 3
Operating System : NI Linux Real-Time (32 bit)3
Communication Interfaces : 2 Gigabit Ethernet ports, 1 USB port, 1 RS232 serial port2
I/O Interfaces : 40 FPGA general-purpose I/O pins, 2 FPGA high-speed serial interfaces, 4 FPGA differential ADC interfaces, 4 FPGA differential DAC interfaces2
Dimensions and Weight :
Size : 95 x 95 mm2
Weight : Not specifically mentioned in the search results.
¥ 6,024.00
Parameters and Specifications :
Supported Communication Rates : 9.6kBit/s, 19.2kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s1 2 .
Electrical Interface Protection : 4000V lightning protection, 1.5A overcurrent protection, 600W surge protection1 2 .
Power Supply : Dual redundant DC input (9-36V), typical DC24V, with DC1500V voltage isolation and reverse polarity protection1 2 .
EMC Test Certification : Passed EMC testing and certification1 2 .
IP Rating : IP301 2 .
Dimensions and Weight :
Dimensions : 430x260x145mm (10.7kg)3 .
Weight : 10.7kg3 .
¥ 6,021.00
Parameters and Specifications :
Voltage : 24V1 2
Current Range : 100-400AA3
Weight : 2KG1 2
Year : 20202
Model : DS200NATOG2A1 2 3 4 5 6
Dimensions :
Overall Dimensions : 8.8 x 3.6 x 4.7 inches1
¥ 6,035.00
Parameters and Specifications :
Voltage : 24V1
Current : 100-400A1
USB Interface Quantity : 2 interfaces1
Type : Module1
Model : 3500/53-03-001 2
Dimensions and Weight :
Weight : 2KG2
Other Dimensions : Not specifically mentioned in the search results.
¥ 6,023.00
Parameters and Specifications :
Input Voltage : 24V DC1 2
Operating Temperature : 40°C to 85°C1 2
Communication Protocols : Modbus, TCP/IP, Ethernet/IP1 2
Memory Capacity : 32kb1 2
Dimensions and Weight :
Dimensions and Weight : Not specifically mentioned in the search results.
¥ 6,235.00
Parameters and Specifications :
Working Voltage : 220VAC1 2
Output : Isolation 12-bit analog output board2
Operating Temperature Range : 0~55℃3
Diagnostic Bus : 2 Mbps HDLC3
Channels : 8 channels3
Dimensions and Weight :
Size : 166mm x 112mm x 36mm3
Weight : Approximately 375g3
¥ 6,205.00
Parameters and Specifications :
Pulse Width Modulation (PWM) Formation : Uses SG3525A for PWM pulse formation1 .
Output Pulse Frequency Range : 20KHZ to 60KHZ1 .
Pulse Interval : 180 degrees between pulses1 .
Power Range : 10KW to 120KW1 .
Operating Voltage : Three-way AC dual 18V/1A and four 22V/0.5A power supplies1 .
Protection Functions : Includes overcurrent, overvoltage, water shortage, and provides switch-type Hall protection interface and linear Hall protection interface1 .
¥ 6,205.00
Parameters and Specifications :
Power Range : 0.75 kW to 370 kW1
Voltage Rating : 200 V to 690 V1
Control Method : Vector Control1
Efficiency : Up to 96%3
Input Voltage Range : 48 V to 650 V DC2
Output Current : 60.2 A2
Dimensions and Weight :
Dimensions : 310 mm x 170 mm x 67 mm2
Weight : 3.4 kg2
¥ 5,620.00
Parameters and specifications:
The specific parameters and specifications of the REXROTH MTS-P01.2-D2-B1-E1-NN-NN-FWEP are not directly given in the search results. Usually, such product parameters may include operating voltage, current, power, interface type, etc., but the specific value needs to refer to the official document or contact the supplier.
Features:
PLC modules from REXROTH are typically highly reliable and stable for a wide range of industrial automation applications.
These modules typically have multiple interfaces and communication protocols for integration with other devices and systems.
REXROTH modules may be programmable, allowing users to configure and customize them according to their specific needs.
¥ 5,620.00
Parameters and Specifications :
Voltage Range : 3.3 kV – 36 kV1
Frequency Range : 45 Hz – 65 Hz1
Synchronization Accuracy : ±0.1°1
Overload Capacity : 2 times the rated current1
Communication Interfaces : RS-232, RS-485 serial ports1
Power Supply Voltage : 24 VDC1 2
Dimensions and Weight :
Size : 220 mm x 165 mm x 50 mm (as per [1]), or 120 mm x 80 mm x 35 mm (as per [5])
Weight : 1.5 kg (as per [1]), or 500 grams (as per [5])