Parameters and specifications
Brand: WESTINGHOUSE or EMERSON
Model: 1C31219G01
The rated working voltage of the relay: it should be determined according to the specific application and the working voltage of the circuit, and it should not exceed the rated working voltage of the relay, otherwise the relay coil is easy to burn.
Other parameters: Since this model may be used in different systems and devices, the specific parameters may vary by application.
Size and weight
Dimensions: 12 x 5 x 16.5cm
Weight: 0.34kg
Parameters and specifications
Model: ESA-700 (may include multiple seed models, such as ESA-700 EPSD-0375-1108)
Use: May be used for PCB installation or other industrial automation applications, no special cooling device is required, and usually operates in the same environment as other board devices.
Operating voltage: In some applications, such as servo drives, the operating voltage can reach 525VAC.
Series specifications: The series specifications of the converters are 1W to 30W, and the operating voltage is at least 85VAC to 264VAC.
Size and weight
Weight: The weight of the ESA-700 varies depending on the specific submodel and use. For example, the ESA-700 concentrator Flame signal analyzer weighs 0.80 pounds.
Parameters and specifications
Brand: EMERSON
Model: 5X00063G01
Operating voltage:
3.3V (in some descriptions)
10-32VDC (110V at system voltage)
Working temperature:
-40℃ to 85℃
-25 ° C to +60 ° C (in some descriptions)
Size: 50mm x 30mm (in some descriptions)
System memory: 512KB
RAM: 128kb
Communication interface: UART, SPI, I2C, Ethernet
Protocols Supported: Modbus, CAN, TCP/IP, UDP
Implementation of quality standards: US standard
Parameters and specifications
Overall dimensions: 44.5mm x 213.4mm x 281.9mm
Weight: 1.25kg
Power requirements: 100-240 VAC, 50/60 Hz, automatic adaptation
Maximum sampling rate: 10 KS/s
Number of channels: 96 differential /192 single-ended
Input type: Support voltage, current, resistance, capacitance, thermocouple, thermistor, strain gauge and other input types
Interface type: SCXI front-end module interface, SMB impedance adapter interface
Maximum voltage range: ±500 V differential /±250 V single-ended
Resolution: 16 bits
Parameters and specifications
Brand: ABB
Model: IMAS011
Control principle: Data communication through CP, support PROFIBUS and industrial Ethernet bus system
Connected equipment: programmer, PC, SIMATIC HMI man-machine interface system, numerical control device, robot control, industrial PC, drive controller, etc
I/O Design:
ET 200M: Fail-safe digital/analog input and output modules for centralized or distributed applications (Cat.4/SIL3 can only be used with isolation modules)
ET 200S PROFIsafe: Fail-safe digital input and output module for distributed applications
Functions: Support the user’s programming, debugging and maintenance work, with high-speed execution of instructions (instruction execution time up to 0.01μs) and floating point arithmetic and other functions
Parameters and specifications
Application: It is often used in the control system of instruments, PLC, and other low-voltage and low-power electrical equipment to resist conductive interference.
Features:
The use of isolation transformers is mainly to deal with conducted interference from the power supply. Using an isolation transformer with an isolation layer, most of the conducted interference can be isolated before the isolation transformer.
At the same time, it can also have the role of power supply voltage transformation.
In some applications, such as fiber transmission Profibus DP bus, with 155M dual optical interface, support peer-to-peer transmission, data, bus arbitration, etc., while achieving high rate long-distance transmission, electrical and ground line isolation, reduce interference and other performance.
Other parameters: Possible industrial grade design, IP30 protection rating, corrugated aluminum reinforced housing, 35mm DIN rail mounting, DC(9-36)V wide power input, relay alarm output, dual power redundancy, and isolation protection.
