Voltage: Depending on the search results, the voltage may vary. One result shows 24V, while in another the voltage and current are mentioned but not specified (voltage: 20, current: 20). For details, see the product manual or contact the supplier.
Current: In the range of 100-400A, but the current value mentioned in another result is smaller (20A), which may vary depending on the product model or configuration.
specification
Communication interface: Provides a variety of communication interfaces, such as Ethernet, serial communication, etc., to support the connection with other devices or systems.
Protocol support: Supports a variety of industrial communication protocols for data exchange and collaboration with other devices.
Data processing capabilities: Have certain data processing capabilities, including data conversion, processing and transmission, to meet the functional requirements of the connected controller.
Programmability: A degree of programmability to be configured and customized according to specific application requirements.
Diagnostics: Provides diagnostics and monitoring capabilities to help identify and resolve potential communication or control issues in a timely manner.
Electrical isolation: Electrical isolation may be available to prevent electrical interference from affecting the system
Operating voltage: Usually 24Vdc, other voltage ranges may be supported.
Current: Some information mentions a current of 100-400A, but this may be a parameter for a specific application or configuration.
Processing speed: Have a high processing speed, such as 0.07μs (for other MOTOROLA products, but the MVME162-512A may be faster), or have an MPC7457 processor running at 1 GHz.
Storage capacity: Large program and data storage capacity, such as 512MB of on-board SDRAM.
Environmental adaptability: can work in a wide temperature range, such as -30+60℃ or 5-55℃.
specification
Structure form: integral.
Installation mode: Onsite installation.
Output frequency: For some functions, output frequency of 56-245HzHz May be supported.
Program capacity and data capacity: Specific values may vary from model to model or configuration, but usually have enough capacity to meet the needs of industrial applications.
Communication rate: Supports a variety of communication rates from 2400bps to 115200bps.
Measurement speed: 10 times/SEC or 80 times/SEC, can be selected by parameter setting.
Display resolution: 1/100000.
Nonlinear error: under the condition of measurement and control 10 times/second, the nonlinear error is not more than ±0.05%F•S.
Sensor power supply: 5V±2%, maximum current 25mA.
Dc power supply: 12 ~ 30VDC, with anti-reverse protection.
specification
Modular design: The PM511V16 is a ruffled module with Express module designed to meet the requirements of industrial and ruffled odd-numbered applications.
Compatible with multiple communication protocols: Compatible with picmg express r 2.1, Type 10, with multiple colors, up to 4GB ECC RAM, and up to 32GB EMM.
High reliability: With ECC welded memory and flash memory, the module requires a long life cycle, seismic resistance and reliable data storage, even at extended temperatures.
argument
Resolution: The module has a high resolution to provide accurate signal acquisition and processing.
Input range: With adjustable input range to suit the range of different signal sources.
Data processing: internal data processing functions, such as signal filtering, linearization, etc.
Pulse output: If it is used as a control pulse card module, it can generate and send precise pulse signals.
Multi-channel output: If it is a control pulse card module, it has multiple output channels, which can output multiple independent pulse signals at the same time.
specification
High precision: Modules are designed with high precision to ensure accurate data acquisition and control operations.
Communication interface: Equipped with communication interfaces, such as Ethernet, serial ports, etc., to achieve data exchange and communication with other devices and systems.
Size and weight
Size: 121212
argument
Input voltage: 24VDC (in some descriptions, the output voltage is -0.6V DC, but the main concern is the input voltage)
Voltage range: 220VDC (may refer to the maximum operating voltage range of the device)
Output frequency: 50HZ (in some contexts, this may refer to the power output frequency supported by the device)
Operating temperature range: 0~55℃ (this is the normal operating temperature range of the equipment)
Diagnostic bus: 2 Mbps HDLC (may refer to diagnostic bus speed for internal or external communication of the device)
Number of channels: 8 channels (may refer to the number of communication or data channels supported by the device)
specification
Product size: 166mm x 112mm x 36mm (this is the physical size of the device)
Product weight: about 375g (weight of the device)
Case: IP30 protection grade, corrugated aluminum reinforced case (describes the protection grade of the equipment and the material of the case)
argument
Event count: up to 4 gigabit events
Frequency measurement range: 1.16 x 10^-3 Hz to 2.5 MHz
Period/pulse width measurement range: 400 ns to 8.5899 x 10^6 s (32-bit floating point number), 400 ns to 858 s (32-bit unsigned integer)
Square wave/pulse train generation range: 0.0076 Hz to 2.5 MHz
Timer/Periodic VME bus interrupter Range: 0.0076 to 1,000 Hz
Orthogonal position measurement: sine/cosine frequency up to 1 MHz, 32-bit counter, limit/modulus check
Integer cycle/pulse width measurement: 16 and 32 bits, discrete or continuous; Low data transfer lag
Programming outputs: up to 24 discrete outputs
Orthogonal position control output: ±1/4 wave control resolution; Maximum 1.25MHz step rate, ±32767 steps per instruction
Onboard CPU: 15 MHz 68HC000 CPU
Data exchange interface: ANSI/IEEE standard 754-1985 for 32-bit floating-point operations
specification
VMEbus architecture: The VMIVME-2540 uses the VME (Versa Module Europa) bus architecture and can communicate with other compatible VME devices and modules
High-precision digital measurement and generation capabilities: provides high-precision event counting, frequency measurement, period/pulse width measurement and other functions
Size and weight
Dimensions: Approx. 115mm x 48mm x 150mm (L x W x H)
Weight: About 1.2kg
argument
Power supply: Dual power supply redundant input, DC(12~36V), typical DC24V, power consumption is less than 4W.
Communication rate: Supports a variety of communication rates, including 9.6Kbps, 19.2Kbps, 45.45Kbps, 93.75Kbps, 187.5Kbps, 500Kbps, 1.5Mbps, 3Mbps, 6Mbps, 12Mbps.
Lightning protection: Provides 4000V lightning protection.
Overcurrent protection: 1.5A overcurrent protection.
Surge protection: 600W surge protection function.
specification
Bus data interface: 9-pin Sub_D jack connector, pin definition conforms to the Profibus DP protocol specification.
Installation method: 35mm guide rail installation.
Size and weight
Dimensions: The overall dimensions are (136x106x54)mm.
Weight: 800g net.
argument
Model: 5SHX1060H0003
Type: Industrial Programmable Logic Controller (PLC)
I/O points: DO/DI (specific points may vary depending on configuration)
Program capacity: Large capacity
specification
System environment: Normal
Color: White
Category: PLC body
Structure: modular
Customize: No
Discontinued or not: Yes
Early models may be equipped with Pentium® III processors up to 1.26 GHz with an advanced transfer cache of 512 Kbyte (or 512 Kbyte for some versions).
Another version may be powered by a Freescale PowerPC 7447A processor at 1.267 GHz.
Memory:
Accepts a 144-pin SDRAM SODIMM with a maximum memory capacity of 512 Mbyte (for the Pentium III version).
For the PowerPC version, up to 4GB DDR2 SDRAM is supported.
Graphics:
The built-in 815E chipset AGP graphics adapter supports high-resolution graphics and multimedia quality video with resolutions up to 1,600 x 1,200 x 256 colors (single view mode).
The display interface supports VGA and DVI-D, with a maximum resolution of 1920×1200.
Network interface:
Dual Ethernet controller, support 10BaseT and 100BaseTX, via two RJ45 connectors.
The PowerPC version features two Gigabit Ethernet interfaces with support for RJ-45 and fiber optic interfaces.
specification
Storage medium: 1GB flash memory, support for CompactFlash Type II card (for PowerPC version).
BIOS: The system and video BIOS provide flash memory in a reprogrammable manner.
Operating systems supported: ows 2000, VxWorks®, Solaris™, QNX®, LynxOS®, and Linux®.
argument
Processor type: High-performance processors, which may include the Atom™ E 3800 series
Memory: Up to 4GB ECC RAM and up to 32GB EMM are supported
Communication protocol: compatible with picmg express r 2.1 and Type 10
Communication rate: from 2400bps to 115200bps
Measurement speed: 10 times/SEC or 80 times/SEC, can be selected by parameter setting
Resolution: Display resolution is 1/100000
Nonlinear error: no more than ±0.05%F•S (10 times/s)
Power supply: DC power supply 12 ~ 30VDC, with anti-reverse protection
specification
Type: processor module
Manufacturer: ABB
System environment: Suitable for a variety of industrial automation and control systems, including manufacturing, power, chemical, transportation and other fields
Size and weight
Size: May vary depending on the specific design, but as a general rule of thumb, such modules may have a compact design for easy installation. The size of similar products mentioned in some sources is 250×190×180mm³, but please note that this may not be the exact size for PM511V16 3BSE011181R1.
argument
Manufacturer: General Electric (GE)
Component number: IS420UCSBH4A
Microprocessor: 1066 MHz Intel EP80579
Memory: 256 MB DDR2 SDRAM
Operating system: QNX Neutrino (Real-time multitasking operating system)
specification
Series: Mark VIe
Function: UCSB controller
Application: Mainly used in gas turbine control system
argument
Processor: 2.6GHz or 2.7GHz dual-core or 2.6GHz quad-core Intel Core i7 5700EQ processor
Memory: 4GB single-channel 1600 MHz DDR3L RAM is standard, expandable up to 8GB
Storage: Integrated hard drive, capacity may vary depending on configuration (e.g. 500GB)
System bandwidth: up to 8 GB/s
Slot bandwidth: 4 GB/s
specification
Type: PXI Embedded controller
Manufacturer: National Instruments (NI)
Operating system: Factory installation Win10(64-bit) and drivers
Size and weight
Dimensions: 115mm x 48mm x 150mm
Weight: Approx. 1.2kg (another saying is 2KG, may vary depending on configuration or version)
series
The PXIE-8840 is part of NI’s PXI family of controllers
