DKC02.3-100-7-FW
¥4,158.00argument
Type Current: 100 amps
Voltage category: 7
Input: 200-480 volts AC +-10%, 16 A, 50-60 Hz
Output: 480 volts AC, 11 amps, 0-1000 Hz
specification
Series: 02
Version: 3
argument
Type Current: 100 amps
Voltage category: 7
Input: 200-480 volts AC +-10%, 16 A, 50-60 Hz
Output: 480 volts AC, 11 amps, 0-1000 Hz
specification
Series: 02
Version: 3
Parameters and specifications
Model: FCS01.1E-W0011-A-04-NNBV, R911311065.
Brand: Bosch Rexroth.
Application: Industrial automation control system for controlling servo motors.
Working voltage: 380-480V three-phase, frequency 50/60Hz±5%.
Output frequency: standard kHz (specific value is not given).
Motor control: Support 2.2kW(3.0HP)400V three-phase motor, VxF or sensorless vector control up to 5.5A.
Speed control range: 0-400Hz.
Parameters and specifications
Arc extinguishing mode: magnetic blow circuit breaker.
Number of poles: 1P+N.
Installation location: outdoor.
Operation mode: electric operation.
Rated frequency: 60HZ.
Rated voltage: 115/200V (note that the unit here may be a misrepresentation of kV, as usually the voltage of such devices is much higher than this, but based on the information provided, we will use the given value for the time being).
Power frequency withstand voltage: 380KV.
Lightning impulse withstand voltage: 220KV.
Rated current: 60A.
Rated peak withstand current: 380A.
Rated short-circuit breaking current: 380KA.
Parameters and specifications
Number of channels: 16 channels relay module, providing 16 relay outputs.
Accuracy: While there is little accuracy information directly about the 3500/33 module, the Bently Nevada 3500 series generally has high precision measurement capabilities.
Programmability: Each output can be programmed independently to perform the required voting logic.
Alarm function: Each relay includes an “alarm driver logic” that supports a variety of alarm and protection functions.
Parameters and specifications
Body size: The Peugeot 3008 has a body size of 4428mm×1840mm×1652mm (domestic version), while the 2019 model has a body length of 4435mm.
Wheelbase: The wheelbase reaches 2613mm.
Tank capacity: 60L.
Power system: Equipped with 2.0L and 1.6THP turbocharged direct injection engine two powertrains. Among them, the 1.6THP turbocharged engine has been praised for its excellent performance and has won the International Engine award.
Transmission: Some models are equipped with a 6-speed manual transmission.
Parameters and specifications
Voltage: There are two ways to say, one is 24V, the other is 220V. This may be because 57C554 May be applied in different scenarios or product families, resulting in different voltages.
Current: In one case, the current range of 100-400A is supported.
Weight: approximately 2KG or 2.3KG, depending on the application or product family.
Product net depth/length: 135mm.
Power: 2700W.
dimension
Size: Specific size information varies between search results, but usually involves a description of length, width, and height. Such as 263337mm
Parameters and specifications
Resolution: 800 x 480 pixels.
Display: Built-in 7-inch widescreen display.
Input power supply voltage: +24 VDC±20%, accessed through a 3-pin Phoenix connector.
Maximum power consumption: 15 watts.
Cooling method: natural convection.
Operating system: Windows Compact Embedded 7 is pre-installed.
Processor: Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor.
Memory: 512 MB DDR2 SDRAM, 256 MB SLC NAND flash, and 512 KB SRAM.
Communication interface: Ethernet I/P communication port, RS232 communication interface (some information mentions RS485 interface, but most information is RS232).
Parameters and specifications
Type: Digital speed control.
Function: It is mainly used to monitor and adjust the speed of the engine or generator to ensure its stable operation within the set range.
Input current: 500mA.
Output voltage: 24VDC.
Output power: 360W.
Input voltage range: 85~264VAC.
Maximum output current: 15A.
Operating temperature range: -25~70℃.
Storage temperature range: -40 ℃ to 85℃.
Protection class: IP30.
Parameters and specifications
Voltage: 24V
Current: Support 100-400A current range
Output frequency: 350kHz (may be the parameter of the device or module used with PR6423/003-030-CN, such as the preprocessor CON021, etc.)
Operating environment: normal temperature and pressure
Applicable temperature: -35℃-+380℃ (may refer to the operating temperature range of the sensor)
Size and weight
Size: Specific size information is not given directly in the search results. However, the measurement range and thread size of the sensor are mentioned, such as the measurement range of 1mm to 20mm, and the thread size is Phi 6mm, Phi 10mm and Phi 18mm (metric or imperial). These may be related to the physical size of the sensor, but do not directly refer to the overall size of the PR6423/003-030-CN.
Weight: 2KG (may refer to the weight of a single module or sensor); But some say it’s 1KG. The exact weight may vary from batch to batch or configuration.
Parameters and specifications
Product Type: Field Control Processor 270 (FCP270).
Memory size: 16 MB SDRAM, 32 MB flash.
Input voltage (redundant voltage) : 24 V DC typical value.
Power consumption (per non-fault-tolerant module) : Max. 8.5W.
Operating temperature: 0 to +60 degrees Celsius (+32 to +140 degrees Fahrenheit).
Size and weight
Dimensions (L x W x H) : 14.7cm x 5.15cm x 11.4cm.
Weight: 0.6 kg (shipping weight is 1.5 kg).
series
The FCP270 P0917YZ belongs to the Foxboro brand field control processor family.
Parameters and specifications
Processor: Unity CPU486 processor, 66MHz.
Memory: 2M SRAM, supports 2MB&1MB+ expansion.
Voltage: Depending on the search results, the voltage may vary. One version is 3.3 V plusmn; 9%. Another way to say it is 24V. This may be because different models or configurations of the 140CPU31110 have different voltage requirements.
Current: According to the information in [2], the current ranges from 100-400A, but please note that this may be related to specific applications or configurations.
Parameters and specifications
Brand: Emerson or may be associated with other brands, such as Westinghouse.
Type: Usually associated with a programmable control system (PLC), which may be a positioner module or a valve drive card.
Communication interface: Supports serial communication, which may include RS-232 and RS-485/422.
Baud rate: Support a variety of baud rates, such as 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K.
Protocol support: May include MODBUS/ slave, CCM slave, DNP3.0 master/slave, etc.