Showing 14041–14052 of 19874 results

1C31224G01

¥5,265.00
Parameters and specifications:
Brand: Emerson/ Emerson or Westinghouse/ Westinghouse (different suppliers may label the brand differently).
Model: 1C31224G01.
Structure: modular.
Control mode: Installation in control room.
Control principle: Other.
Processor: Possibly LD instruction processor, hard PLC.
Signal range: Configurable in the field to provide isolation up to 3500 Veff (isolation is model specific).
Uses: It is used to receive a variety of input signals such as AC and DC voltage and current, frequency, temperature (thermocouple and RTD), and process sensors, and provides 4 to 20 mA or 0 to 10 Vdc standard signal output.

IC695CHS012

¥4,521.00
Parameters and specifications:
Series: GE Fanuc RX3i PACSystems series.
Number of slots: 12.
Supported I/O types: PCI (IC695) and serial (IC694) based I/O.
Power specifications: Internal power supplies use 240 mA@5 VDC and 600 mA@3.3VDC.
Internal power consumption rating: 600 mA at 3.3 V DC and 240 mA at 5 V DC.

140NOE77100

¥5,265.00
Parameters and specifications:
Brand: SCHNEIDER/ Schneider.
Type: CPU module, Ethernet network TCP/IP module.
Voltage: 24V.
Current: 100-400A (Note: this may be a range and the exact value may vary by application or configuration).
I/O count: PN/DP.
Program capacity: 2048.
Firmware version: V1.0.0.
System environment: Stable.
Color: Black.

125840-01

¥4,151.00
Parameters and specifications:
Series: Part of the Bently Nevada 3500 series bearing vibration monitor.
Power supply voltage: 24 volts DC.
Consumption: 5 watts.
Operating temperature range: -40 to +85°C (-40 to +185°F).
Size and weight:
Size: The exact size is not directly mentioned in the search results, but a search result for 125840-01 350015 card mentions the size 50mm x 30mm x 5mm, but please note that this may not be the exact size of 125840-01.
Weight: In the search results described as a two-axis vibration monitor, it weighs 0.6 kg. In another search result describing a power module, the weight was 2KG. This may be a 125840-01 product of a different model or purpose.

AI810

¥5,265.00
Parameters and specifications:
Input voltage: 24V DC.
Input current: Support 0… 20 mA, 4… 20 mA, 0… 10 V or 2… 10 V.
Output voltage: 0-10V DC.
Output current: 4-20mA.
Operating temperature range: -20°C to +60°C.
Storage temperature range: -40°C to +85°C.
Protection level: IP20.
Number of channels: 8.
Resolution: 12 bits.
Fault protection function: overload protection, short circuit protection, overvoltage protection, etc.

TP867

¥4,152.00
Parameters and specifications:
Series: Siemens Industrial automation product line.
Main functions: Used in data communication and control system.
Communication interface: Optical fiber communication interface, supporting optical fiber transmission technology.
Input and output functions: contains digital input and output functions for receiving and sending digital signals, supporting the processing of switching and logic control signals.
Communication protocols: Support standard industrial communication protocols, such as PROFIBUS, PROFINET, etc.

TFTX11702

¥5,625.00
Parameters and specifications:
Input current: 500mA.
Output voltage: 24VDC.
Output power: 360W.
Input voltage range: 85~264VAC.
Size and weight:
Product size: 10 x 7.6 x 1.2 inches.
Product weight: Approx. 1.2kg or 1.2 LBS.

140CRA93100

¥5,268.00
Parameters and specifications:
Model: 140CRA93100.
Manufacturer: Schneider Electric.
Series: Modicon Quantum series.
Type: I/O module.
Input voltage: 24VDC, 48VDC.
Output voltage: 24VDC.
Maximum output current: 10A.
Operating temperature range: -40℃ ~ +85℃.
Product size: 100mm x 50mm x 20mm.
Product weight: 0.3kg (or 0.60 lb).
Input channel: 8.
Redundancy: Dual power supply and processor.
Max I/O point: 384.
Communication protocol: Modbus, Ethernet, OPC.
Analog input number: 8.
Analog input resolution: 12 bits.

RP7517A 1009-1

¥6,235.00
Parameters and specifications:
Input voltage: 220/240V(-15+10%) 50Hz(40-60Hz).
Connection mode: three-wire insert terminal.
Main current: 0.2A.
Ignition time: Continuous ignition is only 1 minute.
Electrical connection: 30 inch (762 mm) wire.
Operating humidity range: 5 to 95%RH.
Voltage: Powered by a control signal.
** Pressure range (psi)** : 0 to 18 psi; Output -3 to 15 psi.
** Pressure range (kPa)** : 0 to 125 kPa; Outputs -21 to 103 kPa.
Input signal: 2 to 10 Vdc.
Air connection: Double barb fitting for 1/4-inch or 5/32-inch plastic tubing.
Capacity: 0.45 scfm(211 mL/s).
Current: 16 mA.

140AVI03000

¥5,265.00
Input voltage: 24V DC.
Input channels: 16.
Number of output channels: 0
Data accuracy: 16 bits.
Maximum sampling frequency: 10 kHz.
Operating temperature: In different data, the range of operating temperature is different. One says it is -25°C to +70°C, while another says it is 0°C to 60°C and another says it is -10°C to 70°C.
Storage temperature: -40°C to +85°C.
Dimensions: 130 x 119 x 36 mm or 132mm105mm52mm.
Weight: 0.4kg or 800g.

140EHC10500

¥6,235.00
Parameters and specifications:
Brand: Schneider.
Model: 140EHC10500.
Voltage: 24V or 240VDC.
Current: 100-400AA or 12ma.
Supply voltage: 24V.
Power: It may be a module with a motor power of 2.1KW, but this information is not directly specific to the 140EHC10500 model, but is general information related to the PLC module.
I/O count: 1.
Size and weight:
Size: The exact size is not explicitly given in the search results, but may be similar to the general size of the PLC module, such as 42*79mm or 100mm x 50mm x 20mm (this may be another product size).
Weight: 3kg or 2KG or 1.2kg.

140CPS12420

¥6,035.00
Model: 140CPS12420.
Brand: Schneider.
Input voltage/Power supply type: 230V AC 170 to 276V or 115V AC 93 to 138V, 47 to 63Hz/ Redundant
Output current: 600mA 230V or 1100mA 115V.
Instantaneous peak current: 38A 115V or 19A 230V.
Rated power VA: 130VA.
Relevant fuse grade: 2A slow break type.
Harmonic distortion: <=10% basic RMS.
Power output current: 10A 60 ° C Redundant or 11A 60 ° C independent.
Power consumption: 6+(1.5x output current), where the output current unit is A.
Product Certification: CUL