Rated output: There are usually Mitsubishi MR-J2M-P8B-PS rated output of 15.0kw, but there are other models rated output may be different, such as 5.0KW.
Interface type: CC-Link communication type (built-in positioning function).
Power supply specification: three-phase AC200V.
Communication interface: Supports CC-Link communication, and can use DI/O instructions with the MR-J3-D01 extended IO unit for table selection and positioning operations (but note that CC-Link communication cannot be performed when using MR-J3-D01).
IP rating: IP65, which means it has some dust and water resistance.
Communication capability: The IC695PBM300 is a Profibus DP master module designed to communicate with up to 125 DP slave stations.
Data transfer: Supports data transfer sizes of 244 bytes input and 244 bytes output per device, and supports up to 3.584 bytes input data and 3.584 bytes output data.
Data rate: All standard data rates are supported, including 9.6 kBit/s, 19.2 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, and 12 MBit/s.
Series:
The IC695PBM300 is part of Emerson Automation’s PACSystems RX3i Programmable Automation controller (PAC) family.
Control Principle: CI854A is a programmable application development module with high reliability and high stability.
Communication interface: CI854A interacts as a PROFIBUS host and builds a PROFIBUS network using RS485 technology.
Connectivity: An 800M controller can connect up to 12 CI854A modules, and each interface works as a single PROFIBUS that can be configured with its own transfer rate.
Supported transmission rates: 9.6 kbit/s to 12000 kbit/s, but not 31.25 and 45.45 kbit/s. The default transmission rate is 1.5 Mbit/s.
Output waveform: The output current is a standard sine wave, small burr, better than the power system requirements of the index standard, ripple coefficient is less than 0.3%.
Measurement accuracy: The actual measurement accuracy is about 0.3, higher than 0.5.
