Application features: 1C31197G01 has high reliability and strong anti-interference ability. It adopts modern large-scale integrated circuit technology, and the internal circuit adopts advanced anti-interference technology.
Serial communication: 1C31197G01 is a serial communication module for RX3i PCI bus. There are two options: IC695CCM002 (2 isolated serial ports) and IC695CCM004 (4 isolated serial ports).
Communication features: Serial ports are isolated, and serial ports are isolated from bases. Support RS-232 and RS-485/422 (can be selected by software Settings). Has hardware handshake function (RTS/CTS, RS-232 only). Baud rate support a variety of options, such as 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K.
Protocol support: Each port independent configuration, support serial read/write, MODBUS/ slave, CCM slave and DNP3.0 master/slave protocols.
Signal conversion function: The module can convert the input DC current or voltage signal into a digital output, so that it can effectively process various signals in industrial automation and control systems to achieve accurate monitoring and control.
High precision performance: The FBM214B has an accuracy of 0.1%, which guarantees a high degree of accuracy during signal conversion and processing, thus improving the reliability and stability of the entire control system.
Power supply voltage range: The power supply voltage range of the FBM214B is 10V to 30V DC, providing users with greater flexibility in power supply selection, so that it can adapt to different power supply environments.
Communication protocol support: May support a variety of communication protocols, such as Modbus TCP/IP, Ethernet/IP, etc.
Hardware requirements: May include 100 mb of free hard disk space (more depending on the application), a 256-color VGA graphics adapter with a minimum resolution of 800 x 600 (true color) or 1024 x 768 (recommended).
Size and weight:
Weight: Approx. 0.84kg (according to specific model MVI69-MNET 19-01-21).
Voltage: The power supply voltage ranges from 12 to 40VDC. 24VDC is recommended.
Power consumption: DC12-35V, HART part less than 2.5mA.
Communication interface: pure hardware conversion, small delay, high efficiency. Support Bell202 standard FSK frequency shift keying signal with 1200Hz and 2200Hz carrier. HART and field device communication interface customization is supported (however, please note that CC-PAOX01 itself does not support HART protocol).
Data communication: magnetic isolation can effectively ensure data accuracy.
Communication mode: Half duplex communication (1200, ODD, 8, 1).
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function, industrial terminal interface.
Relay alarm output: fiber link fault and power supply fault alarm output, contact capacity: DC48V/1A, industrial terminal interface.
Mechanical characteristics:
Overall dimensions: 132mm x 105mm x 52mm, or 300 x 235 (note: there are two different sizes, which may vary by version or application scenario).
Input/output: Up to 32 digital input/output channels, 16 analog input/output channels, 8 frequency input channels and 4 pulse output channels.
Processing power: Supports 16 programming blocks with up to 32 logic gates or input/output operations per block.
Programmable logic: Supports a variety of logic operations, including AND, OR, NOT, XOR, Latch, etc.
Security: It has multi-level safety protection, including sealed protection, anti-vibration, dustproof, waterproof, etc., and supports programmable safety logic.
Application: For ultra-low power, secure iot applications.
