Grid view List view

Showing 1237–1248 of 20827 results

GE DS200LDCCH1ANA

¥12,999.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE DS200LDCCH1ANA
Product Series Mark V Control System Spare Part
Operating Voltage 24V DC ±10%
Input/Output Channels Configurable digital I/O channels (varies by system setup)
Communication Protocol Supports GE Proprietary Protocol, Modbus RTU
Operating Temperature Range -40°C to 70°C
Storage Temperature Range -55°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing)
Dimensions (L×W×H) Standard industrial form factor (150mm×100mm×50mm, subject to verification)
Weight Approx. 0.8kg
Certification UL, CE, ISO 9001 Certified

GE DS200ADMAH1A

¥2,599.00

Product Parameters

Parameter Name Specific Specifications
Brand & Model GE DS200ADMAH1A
Product Type Industrial-grade high-reliability digital input module
Input Channels 16 independent digital input channels
Input Signal Type Dry contact input, compatible with NPN/PNP sensors (configurable)
Input Voltage Range 24VDC (±10%), wide-voltage adaptation: 19.2VDC ~ 30VDC
Input Current Typical value: 5mA @ 24VDC; Maximum: 8mA
Response Time Standard mode: ≤1ms; High-speed mode: ≤0.2ms (configurable)
Input Impedance ≥1kΩ
Operating Voltage 24VDC (±10%), supports redundant power supply
Power Consumption Typical: 6.5W; Maximum: 8.2W (full load)
Operating Temperature -40℃ ~ +70℃
Storage Temperature -55℃ ~ +85℃
Relative Humidity 5% ~ 95% (non-condensing, altitude ≤ 2000m)
Protection Level IP20 (module body); Optional front panel IP40 protection
Isolation Method Channel-to-channel electrical isolation (250VAC/1min); Module-to-backplane optical isolation
Compatible Systems GE Mark VIe, Mark VI, Speedtronic series control systems
Communication Protocol Supports GE Proprietary Protocol, Modbus TCP, Ethernet/IP
Dimensions (L×W×H) 140mm × 85mm × 68mm
Weight Approximately 420g
Certification Standards UL, CSA, CE, IEC 61131-2, IEC 61010-1, RoHS
Mean Time Between Failures (MTBF) ＞180,000 hours
Diagnostic Functions Channel open-circuit detection, power failure alarm, overvoltage protection, signal drift monitoring

GE DS200CDBAG1ABA

Product Parameters

Parameter Name Specific Specifications
Brand & Model GE DS200CDBAG1ABA
Product Type Data Communication & Processing Module (for GE Mark VIe Control System)
Supported Communication Protocols GE Speedtronic, Ethernet/IP, MODBUS TCP, PROFINET IO
Communication Interfaces 2 x 10/100/1000M adaptive Ethernet ports (RJ45), 1 x dedicated GE controller bus interface
Data Transmission Rate Up to 1000 Mbps (Gigabit Ethernet), 100 Mbps (controller bus)
Communication Distance 100m for Ethernet (Cat5e/Cat6 cable); 50m for controller bus
Operating Voltage Range 20.4V DC – 28.8V DC
Operating Temperature Range -40°C – +70°C
Storage Temperature Range -40°C – +85°C
Protection Class IP20 (module body)
Mounting Method 35mm DIN rail mounting
Compatible Control Systems GE Mark VIe, Mark VI, and select Mark V control systems
Dimensions (L×W×H) 135mm × 155mm × 65mm
Weight Approximately 0.58kg
Protection Functions ESD protection (±25kV contact discharge), overvoltage protection, short-circuit protection, network overload protection
Status Indicators Power indicator, Ethernet link indicator, data transmit/receive indicator, controller bus status indicator, fault alarm indicator
Diagnostic Functions Built-in network fault self-diagnosis, protocol error logging, connection status monitoring

GE DS200ADGIH1AAA

¥12,999.00

Product Parameters

Parameter Name Specific Specifications
Brand & Model GE DS200ADGIH1AAA
Product Type Digital I/O Hybrid Module (for GE Mark VIe Control System)
Input Channel Count 16 digital input channels
Output Channel Count 16 digital output channels
Input Signal Type 24V DC dry contact/wet contact, sinking input (NPN)
Output Signal Type 24V DC sourcing output (PNP), configurable for high-side switching
Single-Channel Output Current Maximum 2A per output channel
Total Output Current ≤15A (sum of all output channels)
Input Response Time ≤1ms
Output Response Time ≤2ms
Operating Voltage Range 20.4V DC – 28.8V DC
Operating Temperature Range -40°C – +70°C
Storage Temperature Range -40°C – +85°C
Protection Class IP20 (module body)
Mounting Method 35mm DIN rail mounting
Compatible Control Systems GE Mark VIe, Mark VI, and selected Series 90-70 PLCs
Dimensions (L×W×H) 140mm × 155mm × 68mm
Weight Approximately 0.6kg
Protection Functions Overcurrent protection, short-circuit protection, reverse polarity protection, ESD protection (±25kV contact discharge)
Status Indicators Power indicator, input channel activity indicators, output channel activity indicators, fault alarm indicator
Diagnostic Functions Built-in channel fault self-diagnosis, overcurrent/short-circuit alarm logging

GE IC693ALG392B

¥25,899.00

Product Parameters

Parameter Name Specific Specifications
Brand & Model GE IC693ALG392B
Product Type Analog Input Module (for GE Series 90-30 PLC)
Input Channels 8 differential input channels
Supported Signal Types 4-20mA DC, 0-20mA DC, 0-10V DC, ±10V DC; compatible with thermocouples (J/K/T/E/R/S/B) and RTDs (PT100)
Input Accuracy ±0.1% Full Scale (FS) for current/voltage signals; ±0.2% FS for thermocouple/RTD signals
Signal Conversion Time ≤10ms per channel
Sampling Rate 50Hz per channel
Operating Voltage Range 120/240V AC (power supply module dependent)
Operating Temperature Range 0°C ~ 60°C
Storage Temperature Range -40°C ~ 85°C
Protection Class IP20 (module body)
Mounting Method DIN rail mounting (35mm standard rail)
Compatible PLC Series GE Series 90-30 PLC
Communication Interface GE Genius Bus protocol
Dimensions (L×W×H) 127mm × 89mm × 152mm
Weight Approximately 0.5kg
Protection Functions Overvoltage protection, reverse polarity protection, electrostatic discharge (ESD) protection (±15kV contact discharge)
Status Indicators Power indicator, channel activity indicators, system fault indicator

ABB TK851V010 3BSC950262R1

¥999.00

Technical Parameters

  • Device Type: Analog output module for industrial PLC control systems
  • Number of Channels: 8 independent isolated analog output channels
  • Output Signal Types: 4–20 mA DC (sinking/sourcing configurable), 0–10 V DC
  • Output Accuracy: ±0.1% of full scale
  • Output Resolution: 16-bit
  • Load Capacity: 4–20 mA channel: Max. 500 Ω; 0–10 V channel: Min. 10 kΩ
  • Isolation Level: 250 V AC (channel-to-channel, channel-to-backplane) for 1 minute
  • Power Supply: Powered by AC 800M PLC backplane (24 V DC)
  • Operating Temperature Range: -25°C to +60°C
  • Protection Class: IP20 (rack mounting in control cabinet)
  • Communication Interface: ABB proprietary backplane bus (high-speed communication with controller)
  • Dimensions (W×H×D): 48.2 mm × 175 mm × 210 mm (standard rack-mounted size)
  • Weight: 0.7 kg
Sale!

WESTINGHOUSE 5X00481G02

¥8,999.00

Product Parameters

  • Device Type: Digital input module for WESTINGHOUSE Ovation DCS
  • Compatibility: Westinghouse Ovation DCS (Version 3.x to 10.x), Ovation controllers (e.g., Ovation 1C31227G01), Westinghouse I/O chassis, Ovation Engineering Tools software, third-party safety systems (via hardwired interlocks)
  • Core Functions: Discrete signal acquisition, noise filtering, signal status monitoring, channel diagnostics, fault alarm output
  • Channel Configuration: 16 independent digital input channels (group isolation)
  • Supported Signal Types:
    • Dry contact signals (NO/NC configurable)
    • Active digital signals (24V DC, sourcing/sinking configurable)
  • Signal Processing Parameters:
    • Response Time: ≤ 1ms (typical), ≤ 3ms (maximum)
    • Input Voltage Range: 20–30V DC (operating), 5V DC (minimum detection threshold)
    • Input Current: 5–10mA per channel (active signal mode)
    • Noise Filtering: Configurable digital filters (0.1–100ms) to suppress electromagnetic interference (EMI)
  • Isolation:
    • Channel-to-Channel: 500V AC (galvanic isolation)
    • Channel-to-Power: 1000V AC (reinforced isolation)
  • Power Supply:
    • Input Voltage: 24V DC ±10% (from Ovation chassis)
    • Power Consumption: ≤ 8W (no load), ≤ 12W (full load)
  • Environmental Specifications:
    • Operating Temperature: -40°C to +70°C (extended range)
    • Relative Humidity: 5–95% RH (non-condensing)
    • Protection Class: IP20 (for cabinet mounting)
  • Physical Dimensions:
    • Size (W x H x D): 100mm x 220mm x 150mm (standard DIN rail/card rack mounting)
    • Weight: Approximately 0.9kg
  • Protection Features:
    • ESD Protection: ±25kV (contact discharge), ±30kV (air discharge)
    • EMI Filtering: Complies with EN 55011/EN 55022 Class B
    • Overvoltage Protection: Up to 60V DC per channel
    • Short-Circuit Protection: Current-limiting design to prevent channel damage
  • Additional Functions:
    • Status Indicators: LED lights for power, channel activity, and fault status (per channel)
    • Configuration: Via Ovation Engineering Tools software
    • Hot-Swappable: Supported with compatible Ovation chassis (no system shutdown required)
    • Diagnostics: Real-time monitoring of open circuits, short circuits, and overvoltage faults; up to 100,000 fault logs (exportable to CSV)

YASKAKA JEPMC-CP3201R-E

Core Specifications

  • Device Type: Multi-axis motion controller module for YASKAWA automation systems
  • Core Function: Precise motion control (positioning, speed, torque control), trajectory planning, and PLC integration for automated production processes
  • Axis Support: Controls up to 32 servo axes (synchronous or asynchronous operation), supports linear/circular interpolation and electronic gearing/camming
  • Control Precision: Positioning accuracy ±0.1 μm (with high-resolution encoders), speed regulation accuracy ±0.01%
  • Motion Modes: Point-to-point positioning, continuous path control, jog mode, torque/speed control, and custom motion profiles
  • Communication Interfaces: Ethernet/IP, PROFINET IRT, EtherCAT (real-time motion bus), RS-485 (for auxiliary communication)
  • Supported Protocols: Modbus TCP, Ethernet/IP, PROFINET, EtherCAT, YASKAWA’s proprietary MECHATROLINK-III
  • PLC Compatibility: Seamless integration with YASKAWA MP Series PLCs (e.g., MP3300/MP2300), compatible with third-party PLCs (Siemens S7, Allen-Bradley ControlLogix) via standard industrial protocols
  • Programming Software: YASKAWA MotionWorks IEC (compliant with IEC 61131-3 standard), supports ladder logic, function block diagram (FBD), and structured text (ST)
  • Input/Output: 32 digital inputs (24VDC), 32 digital outputs (24VDC, 0.5A per channel), 4 analog inputs (16-bit, 0-10V/4-20mA)
  • Operating Environment: Temperature range -10°C to +55°C, protection class IP20 (panel mounting), resistance to electromagnetic interference (EMI) per IEC 61000-4
  • Power Requirements: 24VDC ±10% power supply, power consumption ≤25W
  • Certifications: UL, CE, FCC, RoHS compliant

HONEYWELL FC-USI-0002

¥25,999.00

Technical Specifications

  • Brand: Honeywell
  • Model: HONEYWELL FC-USI-0002
  • Product Type: Universal Serial Interface Module (Industrial Automation)
  • Supported Interfaces: 4 independent ports (configurable as RS-232, RS-422, or RS-485)
  • Supported Protocols: MODBUS RTU, MODBUS ASCII, DF1, Honeywell Proprietary Protocols
  • Baud Rate: 300 bps to 115.2 kbps (configurable per port)
  • Data Bits: 7 or 8 bits
  • Parity: None, Odd, Even, Mark, Space
  • Stop Bits: 1, 1.5, or 2 bits
  • Data Buffering: Up to 10,000 data points (local buffering)
  • Host Interface: ControlNet, Ethernet/IP (compatible with Honeywell ControlEdge PLC/Experion PKS DCS)
  • Power Supply: 24 VDC (±10%), Power Consumption ≤ 15 W
  • Operating Temperature: -40°C to +70°C
  • Storage Temperature: -55°C to +85°C
  • Protection Rating: IP20
  • Housing Material: Metal (aluminum alloy)
  • Mounting Type: 35 mm DIN Rail Mount
  • Dimensions (L×W×H): 140 mm × 110 mm × 75 mm
  • Weight: Approximately 0.6 kg
  • Compatibility: Honeywell ControlEdge PLC, Experion PKS DCS, third-party serial devices (sensors, transmitters, actuators)
  • Certifications: CE, UL, CSA, ATEX (Zone 2/22), IECEx, FCC, RoHS
Sale!

PROSOFT MVI46-MNET

¥3,999.00

Technical Specifications

  • Brand: ProSoft Technology
  • Model: PROSOFT MVI46-MNET
  • Device Type: Modbus Communication Module (for Allen-Bradley ControlLogix PLC)
  • Supported Protocols: Modbus RTU (RS485), Modbus TCP/IP (Client/Server)
  • Communication Ports: 2 x RS485 (half-duplex, 9600-115200 bps), 1 x 10/100 Mbps Ethernet (RJ45)
  • Maximum Nodes: 32 Modbus RTU slaves, Unlimited Modbus TCP clients (based on bandwidth)
  • PLC Compatibility: Allen-Bradley ControlLogix L6x/L7x PLC chassis (1756 chassis)
  • Data Memory: 8 KB shared memory for PLC-Modbus data exchange
  • Operating Voltage: Powered via ControlLogix chassis backplane (5 VDC)
  • Power Consumption: Maximum 3.5 W
  • Operating Temperature: 0 °C to +60 °C
  • Storage Temperature: -40 °C to +85 °C
  • Relative Humidity: 5% to 95% (non-condensing)
  • Protection Rating: IP20 (chassis-mounted)
  • Dimensions (W x H x D): 130 mm x 80 mm x 160 mm (ControlLogix chassis compatible)
  • Certifications: CE, UL, CSA, FCC Class A
Sale!

PROSOFT MVI69-PDPMV1

¥5,499.00

Technical Specifications

  • Brand: ProSoft Technology
  • Model: PROSOFT MVI69-PDPMV1
  • Device Type: Profibus DP Master/Slave Communication Module
  • Supported PLCs: Rockwell Automation CompactLogix (1769 chassis), MicroLogix (1761/1762/1763)
  • Supported Protocol: Profibus DP V1/V2 (EN 50170)
  • Communication Port: 1 x Profibus DP (RS485, half-duplex, 9.6 kbps to 12 Mbps)
  • Operational Modes: Profibus DP Master (up to 124 slaves), Profibus DP Slave
  • Maximum Data Exchange: 244 bytes Input / 244 bytes Output (per slave)
  • Backplane Interface: CompactLogix 1769 chassis backplane, MicroLogix expansion interface
  • Data Memory: 8 KB shared memory for PLC-Profibus data exchange
  • Operating Voltage: Powered via PLC chassis/expansion bus (5 VDC)
  • Power Consumption: Maximum 4.0 W
  • Operating Temperature: 0 °C to +60 °C
  • Storage Temperature: -40 °C to +85 °C
  • Relative Humidity: 5% to 95% (non-condensing)
  • Protection Rating: IP20 (chassis/DIN-rail mounted)
  • Dimensions (W x H x D): 32 mm x 100 mm x 125 mm (CompactLogix); 35 mm x 100 mm x 110 mm (MicroLogix)
  • Certifications: CE, UL, CSA, FCC Class A, Profibus Conformance Tested