Control Power: Rated for 90-300V DC and 70-265V AC, with a frequency range of 48-62 Hz.
Output: Provides four analog outputs of 4-20 mA.
Input Voltage Range: Accepts a wide range of input voltages, including 100-240VAC.
Power Output: Rated for a maximum of 360W.
CE Certified: Meets safety and performance standards.
Dimensions: Approximate dimensions are 115mm x 48mm x 150mm (Length x Width x Height).
Weight: Typically weighs 1.2kg.
Measurement Range: Typically, it offers a vibration measurement range of 0-5 g with a resolution of 0.01 g.
Sampling Rate: The module has a sampling frequency of 10 kHz, enabling high-speed data acquisition.
Signal Output: BNC interface for analog signal output.
Power Supply: The module can be powered through connection to a data acquisition system or an external battery.
Dimensions: The module measures approximately 97mm x 45mm x 24mm (length x width x height).
Weight: It has a weight of approximately 0.91kg (2.0lbs.).
Power Supply: 24 V DC.
Rated Current: 5A.
Contact Capacity: 30 A.
Response Time: Less than 25 ms.
Protection Rating: IP65.
Dimensions: 140 mm x 70 mm x 35 mm (5.5 inches x 2.8 inches x 1.4 inches).
Weight: Actual weight may vary depending on the specific configuration and accessories, but generally, it should be within a reasonable range for an industrial monitoring module.
Type: PLC (Programmable Logic Controller).
Power Consumption: Typical value of 4.75 watts.
Maximum Current: Less than 1mA dc (dry contact to common).
Cable Length: Supports cables with a maximum length of 30 meters (100 feet).
Dimensions: Height – 9.5 inches, Width – 0.96 inches, Depth – 9.52 inches.
Weight: Approximately 0.91 kilograms.
Power Input: The module supports multiple power input options, including universal AC power, high-voltage DC power, and low-voltage DC power.
Power Output: Depending on the configuration, the 3500/15 can provide stable DC output voltages and currents.
Insulation Resistance: The module offers high insulation resistance of 500 VDC, greater than 10 MΩ, ensuring reliable electrical isolation.
Dimensions: The module measures approximately 3.35 x 9.5 x 10.25 inches (85 x 242 x 260 millimeters) in its typical configuration.
Weight: The 3500/15 module weighs approximately 4.0 pounds (1.8 kilograms).
Input Voltage: Typically, the Woodward 9907-147 operates with a 24VDC input voltage.
Output: It provides an output range of 0-20mA DC, with a maximum load resistance of 600Ω.
Dimensions and Weight:
The exact dimensions and weight of the Woodward 9907-147 controller module are not specifically mentioned in the provided search results. However, it is typically a compact unit suitable for panel-mounting, allowing for easy integration into industrial control systems.
Input Voltage: Typically, the Emerson SE3007 accepts an input voltage range of 100-240V, making it suitable for a wide range of applications.
Output Voltage & Current: Depending on the specific model, the output voltage is usually 24V, with a maximum output current of 3A.
Operating Temperature: The Emerson SE3007 operates within a temperature range of -10℃ to 40℃.
The dimensions of the Emerson SE3007 are approximately 80mm x 50mm x 30mm, making it a compact unit suitable for panel-mounting.
The weight of the module is typically around 0.2kg, providing ease of handling and installation.
Processor: MOTOROLA MVME5100 typically features a PowerPC microprocessor, such as the PowerPC 7448 1.4GHz.
Memory: It offers memory options ranging from 128 MB to 512 MB of DDR2 SDRAM, depending on the specific configuration.
Storage: The module provides 256MB of flash memory, 512KB of NVRAM, and options for PCMCIA and CF slots for additional storage expansion.
Networking: It includes two Gigabit Ethernet ports for high-speed networking, along with a serial port and a USB port for peripheral connectivity.
Display Interface: MVME5100 supports VGA/24-bit LCD interfaces.
Type : dual-channel rotational speed/key phase module .
Supported sensors : Eddy current sensor and Hall effect sensor .
power input : provides redundant power inputs to improve system reliability.
output signal : two TTL pulse output and two key trust signal output, can be used to control other devices or system monitoring .
communication interface : RS232/485 port for on-site configuration and communication.
Approximate weight : 1.24kg
Processor: The DS200SIOBH1ABA features an ARM9 MPU (Microprocessor Unit) with a clock speed of 400MHz.
Memory: It comes equipped with 64MB of SDRAM, providing ample memory for processing tasks.
I/O Interfaces: The control board supports multiple input/output interfaces, including RS232, RS485, and USB, enabling it to connect with various sensors, actuators, and other industrial automation devices.
Operating System: It runs on a DCS system.
Size: The exact dimensions of the DS200SIOBH1ABA are not explicitly stated, but one source mentions it as 101623mm, while another source gives a different dimension of 1200mm. It’s important to note that there may be some confusion or a typo in one of these sources, and it’s recommended to refer to official documentation for the accurate dimensions.
Weight: The weight of the control board is reported as 1.24kg by one source and 1kg by another. This minor variation is likely due to different measurement techniques or tolerances, but again, it’s advisable to refer to official specifications for the exact weight.
Input/Output Channels: The module provides 16 digital input channels and 16 digital output channels.
Input Type Configuration: Each input channel offers a configuration option to select different input types, such as voltage or current ranges.
Output Channel Configuration: Each output channel can be configured for bypass or non-bypass operation, with a load capacity of up to 2A.
Power Supply: The module operates on a +5VDC work power.
Operating Temperature Range: It can operate within a temperature range of -40°C to 70°C.
Size: The module measures approximately 3.25 inches (8.2 cm) in height, 2 inches (5.25 cm) in width, and 2.90 inches (7.3 cm) in depth (excluding the extended portion to the input/output terminal block).
Weight: The weight of the module is approximately 2KG.
Voltage: The module operates at a voltage of 24V.
Event Handling: The module is capable of handling DP (Decentralized Peripheral) events. When a DP slave event occurs, it sets appropriate bits in the DP slave event register (slvEvent). It also handles I/O updates from the master server and changes in received data from the master host.
Configuration: The module allows the host to write current slave configuration data to flash memory and read it back from there.
Size: The module’s dimensions are approximately 26mm (length) x 10mm (width) x 3mm (thickness).
Weight: The IS200PMCIH1ABA module weighs approximately 1.05kg or 2KG, depending on the source. This variation could be due to differences in measurement methods or product versions.