Input voltage: 100-240VAC
Output voltage: 24VDC
Maximum output current: 2A
Communication rate: Supports a variety of rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, etc
Lightning protection: 4000V lightning protection capability
Overcurrent protection: 1.5A overcurrent protection
Surge protection function: 600W surge protection function
Dimensions: 87mm x 40mm x 129mm
Weight: 0.3kg
Type: Pulse input module or programmable module
Input signal: 8 (non-universal)
Resolution: 16 bits
Accuracy: 1000Hz to 20000Hz, ±0.01%
Communication interface: Support Ethernet, serial port, Modbus and other common communication protocols and interfaces
System support: Can be used with other DCS system components
Operating temperature: -40°C to +70°C (the operating temperature range of the TRICONEX 3009 series can be used as a reference)
Input voltage: It may vary depending on the model and configuration, but the standard voltage range is generally applicable to industrial automation and process control systems
Memory size: 16 MB SDRAM, 32 MB flash
Input voltage: 24 V DC (typical)
Power consumption: Maximum 8.5W per non-fault-tolerant module
Operating temperature: 0 to +60 degrees Celsius (+32 to +140 degrees Fahrenheit)
Configuration: Single-processor module, fault-tolerant by two processor modules, the substrate integrated into an interconnect fault-tolerant connector
Processor: Possible Microprocessor based AMD Elan 520 100MHz, I/O processor CommControl™ ASIC
Dimensions: Length 14.7cm x width 5.15cm x height 11.4cm
Weight: 0.6 kg (product itself), shipping weight 1.5 kg
Control power supply: rated 24-60 VDC, 20-48 VAC@ 48-62 Hz.
Analog output: Provides 4-20 mah analog output.
Communication ports: Three separate ports are available, including an RS232 port (for programming setup, firmware upgrade, and local control), a computer RS485 port (which can be connected to a PLC, DCS, or PC-based user), and a secondary port, RS458 (for simultaneous query or redundancy from another PLC, DCS, or PC software).
Size and weight
Package size: When shipped, the relay package is 12 inches wide, 11 inches high, and 10 inches deep.
Weight: The weight given by different sources varies and may vary depending on packaging and accessories. Some data show that the weight is about 1.2kg, and some data mention that the weight is 3.76kg.
series
SR469 Series: The SR469-P5-LO-A20-E is a product in this series.
Model: DSPC174 3BSE005461R1
Brand: ABB
Rated voltage: 24V DC
Rated current: 2A
Processor: PowerPC 440
Main frequency: 300MHz
Memory: 128MB SDRAM
Storage: 2MB Flash
Communication interface: Ethernet, Profibus (Ethernet rate: 10/100Mbps; Profibus Speed: 960kbps/1.5Mbps)
Operating temperature: -40°C to +70°C
Storage temperature: -40°C to +85°C
Humidity: 5% to 95%RH (non-coated)
Protection level: IP20
Model: JASP-WRCA01B
Manufacturer: YASKAWA
Type: Servo control board or related electrical control equipment
Power supply: May depend on other parts of the system or device, the specific specifications are not directly given
Working environment: Suitable for industrial automation and robot control environment
High Performance: As a product of YASKAWA, the JASP-WRCA01B may have high performance servo control capabilities to meet the high precision requirements of industrial automation and robot control
Stability: YASKAWA’s servo systems are known for their stability and speed, so the JASP-WRCA01B is also likely to have excellent stability
Type: Digital input module/Power supply board
Input voltage: Source AC input is rated from 38 to 115 VAC and frequency range from 0 to 500 kHz (depending on input voltage strength)
Compatibility: It is cross-compatible with GE drives such as DC2000, AC2000, CB2000, ME2000 and FC2000
Function: Provides system control power for the chassis fans
High-precision acquisition: With high-precision digital input function, it can accurately collect and convert the input signal
Data processing: Built-in data processing functions can perform various algorithms and logical operations
Programmable configuration: Supports programmable configuration, and users can flexibly configure and customize Settings according to specific requirements
Model: 1TGE120028R0010
Supply voltage:
18-80VDC (according to some descriptions)
There are also references to 24Vdc/120Vac, but may refer to different applications or configurations.
Maximum current:
12A (according to some descriptions)
There are other accounts that mention 100-400A, but this may be an error or confusing information, as this does not match the other descriptions of 1TGE120028R0010.
The upper computer is set up to operate and control the drive through the I/O port
The default communication rate of the drive is 19200bps
The vibration frequency and amplitude are set by using special upper computer software
Parameters and specifications
Processor: The use of high-performance processors to ensure high-speed data forwarding and processing
Memory: Equipped with 1GB DDR3L SDRAM
Storage: 8GB of eMMC storage for configuration, logs, and other necessary data
Communication interface: Support WiFi, Bluetooth, USB 2.0 and Ethernet interfaces, providing a variety of connection methods
Display: Equipped with 7-inch TFT LCD touch screen, the resolution is 1024×600
Network rate: Support Gigabit Ethernet (Gigabit Ethernet) or higher speed data transfer
Port type: RJ45 port or optical fiber port
Network management: Provides network management functions, including remote monitoring, fault diagnosis, and bandwidth management
Protocol support: Support a variety of industry standard protocols, such as IEEE 802.3, IEEE 802.1Q VLAN, IEEE 802.1p QoS, etc
Model: 8V1090.00-2
Power supply voltage: May be related to the standard voltage range of the servo drive, but the specific value is not directly given in the search results, may be 3x 400-480V (based on other models in the same series)
Rated current: 8.8A
Rated power: 4kW
Position proportional gain: This parameter affects the stiffness and position lag of the servo system, depending on the servo model and load
Position feedforward gain: affects the high-speed response characteristics and stability of the system
Larger output torque setting: Set the internal torque limit value of the servo motor, expressed as a percentage of the rated torque
The 8V1090.00-2 belongs to B&R’s ACOPOS servo drive family.
Measurement parameters: flow current /SCD
Power Supply: 230 Vac
Measuring range: -1000 to +1000 mV
Accuracy: 0.1%
Flow rate: 1 L/min (standard), 5 GPM (high flow rate optional)
Response time: 1 second
Output: 4~20mA, -10 ~ + 10V, 0~10V, Modbus (optional)
Shell: NEMA 4x, IP 65
Mounting hole size: 11.0 “x 6.00”
Weight: 20 lbs, 9 kg
Operating voltage: Depending on the search results, there are references to 12-48VDC and 220V. This may mean that the SLS1508 has different operating voltage versions or is suitable for different application scenarios.
Frequency range: Under 220V operating voltage, the frequency range is 50Hz-60Hz.
Power: Under 220V working voltage, the power is 1500W.
Output current: Max. 10A.
Efficiency: greater than 90%.
Size: Depending on the search results, the size will vary. There are mentions of 170mm x 105mm x 32mm, and there are also mentions of 180mm x 130mm x 80mm. This may be the size of a different model or version of the SLS1508.