Discrete Inputs: 24 discrete input channels.
Discrete Outputs: 8 discrete output channels.
Supported Voltages: 15 to 60 V dc, 120 V ac/125 V dc, and 240 V ac for discrete input/output signals.
Isolation: Each input/output is group-isolated.
Design: Compact and robust, suitable for harsh environments (G3 grade).
Dimensions and Weight:
Dimensions: The dimensions are approximately 57mm x 35mm x 45mm. However, please note that the exact dimensions might vary based on the module’s configuration and packaging.
Input Voltage Range: Typically, it accepts an input voltage range of 12-48VDC.
Output Voltage: Provides a fixed output voltage of 5VDC.
Output Current: Maximum output current is 10A.
Efficiency: The module operates with an efficiency greater than 90%.
Dimensions and Weight:
Dimensions: 170mm x 105mm x 32mm.
Weight: Approximately 120g.
Features:
Robustness: Designed for durability and long-term stability in harsh industrial environments.
High Performance: Provides fast and accurate signal processing, ensuring smooth and responsive operation.
Tensile Force Rating: 2.0KN (2000 Newtons) indicates its maximum capacity for measuring tensile forces.
Model Identification: PFTL101B is the model number, while 3BSE004185R1 is the specific part number for this tension sensor.
Dimensions and Weight:
Dimensions: Exact dimensions may vary slightly based on packaging or attachments, but typically, the sensor itself is compact and suitable for integration into various systems.
Weight: The weight is typically light enough for easy handling and installation but specific numbers may not be widely available.
Features:
High Accuracy: The sensor is designed to provide accurate and repeatable measurements.
Durability: It is constructed to withstand harsh industrial environments and maintain stable performance over time.
Output Type: Analog Output Module.
Output Range: 4–20 mA controlled output with 0–22 mA overrange capability.
Output Accuracy: Less than 0.25% within the FSR (0–22 mA) range.
Resolution: 12-bit.
Voltage Range: Accepts voltages from 0 to 5 VDC or -5 to +5 VDC with C1, +6% accuracy.
Operating Temperature Range: From 32°F to 158°F (0°C to 70°C).
Arc Detection: The TVOC-2-240 is capable of detecting arc faults in power systems, which are potential safety hazards.
Fast Response: The monitor responds quickly to arc faults by sending electrical signals to nearby circuit breakers to disconnect the power and extinguish the arc within 1 millisecond.
Multiple Detector Inputs: It has 10 detector inputs and can trigger up to three circuit breakers with regional selectivity.
Expandable Design: Up to two expansion units can be added, increasing the number of light detectors to 30.
Power Supply: The device operates on a power supply range of 100-250 V DC or 100-240 V AC 50/60 Hz.
Dimensions and Weight:
Dimensions: The product’s net width is 210 mm, net height is 230 mm, and net depth/length is 80 mm.
Weight: The TVOC-2-240 weighs approximately 1.2 kilograms.
Analog Input: It offers 32 channels for analog input.
Analog Output: It has 4 channels for analog output.
Digital I/O: It provides 8 channels of digital I/O.
Maximum Sampling Rate: The device can achieve a maximum sampling rate of 1 ms/s.
Resolution: It has a resolution of 16 bits.
Communication Interface: The SCXI-1349 utilizes a USB communication interface.
Dimensions and Weight:
Dimensions: According to some sources, the dimensions of the NI SCXI-1349 are approximately 9.5″ x 5.5″ x 2.0″ (length x width x height). However, another source indicates a different dimension of 7.2 x 6.8 x 1.2 inches. It’s always advisable to refer to the official specifications for the most accurate dimensions.
Input Signals: The amplifier accepts three input signals, including one single-ended and two differential inputs.
Power Supply: It requires a +24V DC power supply for operation.
Internal Switches: Internal selection switches enable the choice of proportional, integral, or both control modes.
Configuration Options: The amplifier offers configurable options due to its years of experience in closed-loop system design and debugging.
Dimensions and Weight:
Exact dimensions and weight specifications for the MOOG G122-829-001 are not provided in the available information. However, it is mentioned to be mounted in a compact DIN rail housing, which suggests a standardized size suitable for industrial installation.
Communication Protocols: Supports IEEE 802.11a/b/g/n standards, offering high-speed data transmission.
Operating Frequency: Operates on both 2.4 GHz and 5 GHz frequency bands.
Data Rate: Up to 300 Mbps, suitable for transmitting large amounts of data.
Transmission Distance: Maximum transmission distance can reach up to 10 miles (10 inches).
Operating Temperature Range: From -40°C to +75°C.
Dimensions and Weight:
Dimensions: 14.8 x 11.8 x 3.8 centimeters (5.82 x 4.64 x 1.48 inches).
Weight: 1.1 pounds (499 grams).
Features:
High Reliability and Stability: Performs exceptionally well in harsh industrial environments.
Multiple Interfaces: Supports various Ethernet interfaces, such as 10/100/1000Base-T, for easy connection and communication with various devices.
Voltage: Typically operates at 24Vdc.
Current: Range of 100-400A.
Specifications:
Interface: Supports various communication interfaces, such as Ethernet and CAN bus, for data exchange and communication with other devices.
Encoder Compatibility: Supports multiple types of encoders, including photoelectric and magnetic encoders, for measuring the position and speed of rotating or linear motion.
Dimensions and Weight:
Dimensions: Approximately 109mm x 182mm x 181mm.
Weight: Typically, it weighs around 2KG (when referenced as a specific product) or 3KG
Communication Protocols: Supports IEEE 802.11a/b/g/n standards, offering high-speed data transmission.
Operating Frequency: Operates on both 2.4 GHz and 5 GHz frequency bands.
Data Rate: Up to 300 Mbps, suitable for transmitting large amounts of data.
Transmission Distance: Maximum transmission distance can reach up to 10 miles (10 inches).
Operating Temperature Range: From -40°C to +75°C.
Dimensions and Weight:
Dimensions: 14.8 x 11.8 x 3.8 centimeters (5.82 x 4.64 x 1.48 inches).
Weight: 1.1 pounds (499 grams).
Multi-Parameter Measurement: It is capable of measuring key electrical parameters such as current, voltage, active power, reactive power, energy usage, power cost, power factor, and frequency.
Waveform Analysis: This feature allows for the diagnosis of waveform distortions or aberrations in the power system.
Recording Functionality: The PQMII-T20-C-A can monitor and record voltage sags and swells, storing up to 500 events. This is crucial for analyzing grid stability and power quality issues.
Control Functionality: The device incorporates programmable setpoints and four assignable output relays, enabling users to add specific control functions such as over/under-current or voltage alarms, unbalanced monitoring, and demand-based load shedding or capacitor power factor correction control.
Product Type: Computer Unit for Industrial Robots.
Model Number: ABB 3HAC041443-003.
Series: DSQC639 Series.
Dimensions: Length: 352 mm, Width: 266.5 mm, Height: 137.2 mm.
Weight: Gross weight and net weight are both 3.52 kg.
Features:
High Performance: The computer unit is equipped with a high-performance processor, ensuring fast and accurate data processing.
Multiple Communication Interfaces: Supports various communication interfaces and protocols, such as Modbus TCP/IP and Ethernet, facilitating seamless integration with other industrial devices.
