Parameters & Specifications:
–Model Number: 81943A041
–Manufacturer: ABB
–Type: Precision Amplifier Module
–Analog Input: Supports single-ended analog input with 16-bit resolution1
–Sampling Rate: Up to 100KSPS1
–Input Signal Range: 0 to 5V or 4 to 20mA1
–Analog Output: 12-bit resolution, with an output signal range of 0 to 5V or 4 to 20mA1
Dimensions & Weight:
–Dimensions: 100 mm x 60 mm x 30 mm (approx.)2
–Weight: 200 g2
1.Parameters:
–Model: 8V1090.00-212
–Manufacturer: B&R Automation12
–Power Rating: 4kW23
–Voltage Range: 400 VAC – 480 VAC23
–Frequency: 50/60 Hz27
2.Specifications:
–Maximum Output Current: 8.8A23
–Speed Response Frequency: 50KHz3
–Product Certification: CE34
–Power Supply: 24 VDC nominal input voltage7
3.Dimensions & Weight:
–Width: 70.5 mm7
–Height: 375 mm7
–Depth: 235.5 mm7
–Weight: 4.4 kg7
Parameters & Specifications:
–Model Number: CPS-150F
–Manufacturer: YASKAWA Electric Corporation
–Power Capacity: Typically 150W, though it may vary depending on the specific application1
–Rated Current: 150A, indicating its high current supply capability23
–Input Voltage: May vary, but typically designed for industrial voltage ranges4
Dimensions & Weight:
–Dimensions: Approximately 5.1cm x 40.6cm x 25.4cm (W x D x H)5
–Weight: Approximately 2.7kg5, though some sources mention a lower weight of 2.6kg6 or 1.4kg4
1.Parameters:
–Manufacturer: YASKAWA12
–Model: JANCD-XCP01-112
2.Specifications:
–Application: Industrial automation, robot control, and monitoring67
–Compatibility: Typically used with YASKAWA robot systems7
–Programming: Supports multiple programming languages for customization6
3.Dimensions & Weight:
–Size: 5.1cm x 40.6cm x 25.4cm, according to one source3
–Weight: 1.25kg, mentioned in one product listing4
–Alternative Weight: 2.7kg, mentioned in another source3
Parameters & Specifications:
–Model Number: QD81DL96
–Brand: Mitsubishi Electric
–Series: Mitsubishi Q series PLC modules
–Ethernet Interface: 10BASE-T, 100BASE-TX, supporting data transfer rates of 10Mbps and 100Mbps12
–Power Supply: 3.3V ± 5% for small flash card12
–I/O Points: Occupies 32 points in a single slot12
Dimensions & Weight:
–Dimensions: 98mm (H) x 27.4mm (W) x 90mm (D) (approx.)12
–Weight: 0.15kg12
1.Parameters:
–Model: LT30412
–Power: 30 horsepower (approximately 22.1 kW)12
–Drive Type: 4-wheel drive (4X4)12
2.Specifications:
–Brand: LuTong12
–Classification: Wheel Tractor1
–Engine Model: YND485T12
–Transmission: 4×(2+1) shuttle shift, 8 forward gears, 4 reverse gears12
3.Dimensions & Weight:
–Overall Dimensions (L×W×H): 3590mm × 1485mm × 1895mm12
–Weight: Minimum operating weight approximately 1620kg12
Parameters & Specifications:
–Model Number: BMXAMO0802
–Brand: Schneider Electric12
–Type: Non-isolated Analog Output Module
–Channels: 8 analog output channels12
–Resolution: 16-bit analog output resolution12
–Output Range: Typically supports 0…20 mA and 4…20 mA current ranges3
–Measurement Error: ≤ 0.25% full scale at 0…60°C, ≤ 0.1% full scale at 25°C3
Dimensions & Weight:
–Dimensions: Approximately 35mm x 147mm x 129mm (L x W x H)1
–Weight: Approximately 0.4kg1
1.Parameters:
–Operating Voltage: Typically 220V AC, as mentioned in several sources12
–Output Frequency: Standard kHz range4
–Power Consumption: Not specifically mentioned, but expected to be in line with industry standards for similar modules
2.Specifications:
–Brand: GE12
–Model: IC694MDL75412
–System Compatibility: Designed for use with GE PLC systems12
–Certification: CCC certified3
3.Dimensions & Weight:
–Dimensions: 29mm x 22mm x 3.5mm, as specified in one source1
–Weight: Approximately 1.32Kg, as mentioned in the same source
Parameters & Specifications:
–Model Number: 3100-MCM
–Brand: May vary depending on the manufacturer (e.g., PROSOFT, Bosch, others)12
–Interface Type: Communication interface module for industrial automation
–Communication Protocol: Supports Profibus DP and potentially other protocols12
–Transmission Rates: Varies, but may support rates up to 12MBit/s2
Dimensions & Weight:
–Dimensions: Specific dimensions are not provided and may vary by manufacturer.
–Weight: Likely lightweight for easy installation and handling, but exact weight is not specified.
1.Parameters:
–CPU: 32-bit RISC processor12
–Memory: 256 KB RAM, 512 KB Flash2
–I/O Points: Up to 256 points2
–Ethernet Port: 100 MB/s full-duplex for efficient data transmission1
2.Specifications:
–Brand: Emerson12
–Series: DeltaV™ Series12
–Power Supply: 24 VDC2
–Operating Temperature: -40°C to +70°C12
–Humidity: Up to 75% RH (non-condensing)1
3.Dimensions & Weight:
–Size: 220 mm x 160 mm x 80 mm2 or 170 mm x 105 mm x 32 mm3 (dimensions may vary depending on the mounting configuration)
–Weight: Approximately 1.5 kg2 or 2 kg1
Parameters & Specifications:
–Model Number: H32NCHA-LNN-NS-00
–Brand: Pacific Scientific or similar12
–Type: Stepper Drive Module
–Control: Designed to control stepper motors23
–Compatibility: Compatible with various stepper motors for precision control23
Dimensions & Weight:
–Dimensions: Specific dimensions are not mentioned, but typical stepper drive modules can vary in size.
–Weight: 2.96 kilograms (mentioned for a specific product, possibly related)1
1.Parameters:
–Voltage: 24V1 or 220V2, depending on the source
–Current Range: 100-400A, mentioned in one source1
–Speed Response Frequency: 1MS1
–Operating Temperature: Suitable for normal industrial operating environments2
2.Specifications:
–Brand: ABB12
–Model: TP830 3BSE018114R112
–Applicability: Servo motors and industrial automation systems1
3.Dimensions & Weight:
–Size: Approximately 23cm in length6, but exact dimensions may vary
–Weight: 2KG1, 1KG2, or 0.2KG6, depending on the source