Parameters and specifications
Signal output: 3.6A
Weight: 1.2kg
Input and output voltage range: 20-90ACdc
Power: 240VDC
Internal variable: 5252
Product certification: HE693ADC410A, value is 12.052.052
Size and weight
Weight: 1.2kg
Parameters and specifications
Sensor input: Two independent eddy current sensor inputs, electrically isolated from power input, input impedance >100 kΩ, input voltage range 0 ~ -22 V dc, input frequency range 0 ~ 8 Hz (10 Hz /-3dB).
Measurement range: The configuration software can be continuously adjusted, the specific measurement range is 1mm to 20mm.
Sensor power supply: Each channel is powered by an independent buffer sensor, electrically isolated from the system voltage and power supply, rated voltage -26.7V dc, rated current 20mA/ maximum 35mA.
Control input: Binary input shared by two channels that controls whether the optocoupler output is on, used for channel or module prohibition.
Output voltage: AC voltage signal directly proportional to shaft vibration superimposed on DC voltage, linear range of output voltage -4 ~ -20V (supply voltage -24V), maximum range -1 ~ -22V.
Response time: Approximately 15 seconds
Parameters and specifications
Brand: GE (General Electric)
Series: RX3i PACSystems series
Processor: Intel-based Celeron (Pentium III) microprocessor, probably 300 MHz
Memory: Generally similar to the IC695CPU310, with 10 MB RAM and 10 MB flash memory
Communication interface: An embedded serial port that supports RS-232 and RS-485 communication
Supported Serial protocols: Modbus RTU Slave, SNP, and Serial I/O
Programming support: Support ladder diagram, structured text, C or function block diagram programming languages
Parameters and specifications
Brand: GE (General Electric)
Series: RX3i PACSystems series
Microprocessor: Intel Celeron (Pentium III)
Memory: 10 MB RAM and 10 MB flash
Processor frequency: 300 MHz (as CPU)
Communication interface: An embedded serial port that supports RS-232 and RS-485 communication
Supported Serial protocols: Modbus RTU Slave, SNP, and Serial I/O
LED status indicator: 8 leds on the front of the case are used to display the system status
Block support: A maximum of 512 blocks are supported, and the maximum size of each block is 128 KB
Programming language: Supports ladder diagram, structured text, C or function block diagram programming languages
Execution speed: Typical execution speed is 0.195 ms /1000 Boolean instructions
Clock accuracy: The maximum internal timing accuracy is 0.01%
Parameters and specifications
Brand: Bosch REXROTH
Type: Servo amplifier (servo driver)
Application: Mainly used in high precision positioning system
Control mode: The servo motor is generally controlled through three ways of position, speed and torque to achieve high-precision positioning of the transmission system
series
Series: DKC series
Parameters and specifications
Voltage: 24 VDC
Current: According to the search results, the current parameters of the CI810B are not directly given, but it is mentioned that the current range of some power modules or power supply units may be 100-400A.
Power consumption: 5 W
Operating temperature: -20°C to +60°C
Storage temperature: -40°C to +85°C
Enclosure protection class: IP20
Data transfer rate: 1 Mbps
Size and weight
Dimensions: 110 mm x 60 mm x 25 mm
Weight: 200 g
Parameters and specifications
Brand: GE (General Electric)
Processing customization: No
Rated power requirements: +5 VDC: 1.0A (up to 1.5A at full USB load of 0.5A)
Operating temperature: 0 to 60°C (32°F to 140°F)
Execution speed: 0.072 ms per 1000 Boolean instructions
Clock accuracy: Maximum drift of 2 seconds per day
Real-time clock battery: Expected life of 5 years
Embedded Serial communication: Rs-232 (com1) and rs-485 (com2)
Supported Serial protocols: Modbus RTU Slave, SNP Slave, Serial I/O
Backplane: Dual backplane bus support: RX3i PCI and type 90-30 serial
Blocks: A maximum of 512 blocks
Parameters and specifications
Brand: B&R
Model: 80VD100PD.C022-01
Scope of use: industrial
Operating voltage: Depending on the search results, it may be 560 VDC
trait
Dual-axis drive: 80VD100PD.C022-01 is B&R’s dual-axis drive.
High reliability: B&R’s servo drives are typically highly reliable and stable for a wide range of industrial applications.
Configurability: B&R’s servo drives typically support multiple configuration options to suit different industrial automation needs.
Parameters and specifications
Brand: PACIFIC SCIENTIFIC (US Pacific)
Voltage: 24V
Current: 100-400A
Weight: 2KG
Alarm function: Yes
Origin: Switzerland
series
LA23GCKC-1Y is a specific model of PACIFIC SCIENTIFIC, the specific family name is not explicitly mentioned in the search results.
Parameters and specifications
Brand: ABB
Country: Switzerland (ABB Group headquarters is located in Zurich, Switzerland)
Functions: Commonly associated with ABB’s DCS (Distributed Control System) or other industrial automation systems
trait
Modular design: May be related to ABB’s modular design, allowing integration with other ABB components.
Industrial automation: Applicable to industrial automation and control systems, which may include data acquisition, communication and control functions.
Flexible configuration: Multiple configuration options may be supported to suit different industrial automation needs.
Parameters and specifications
Brand: ABB
Operating voltage: Depending on the search results, the operating voltage will vary. There is a mention of 1V, but there are also 12~220V.
Output frequency: 2kHz or 50-60kHz.
Product certification: ABB or CCC.
Size and weight
Size and weight: Specific size and weight information is not explicitly given in the search results.
Parameters and specifications
Dimensions (W x H x D) : 126 x 128 x 69.1mm
Program storage: system flash, battery-operated memory
Power requirements: 220mA for 5V, 570mA for 3.3V
Floating point: Support
Boolean execution speed: 0.8ms /K (typical value)
Real-time clock accuracy: 100ppm (0.01%) or +/- 9 seconds/day
Built-in communication: RS-232, RS-485, Ethernet
Configurable memory: Maximum 64K bytes
Ethernet data rate: 10Mbps (half-duplex or full-duplex)
Ethernet port: RJ-45, UTP