Grid view List view

Showing 217–228 of 19874 results

GE IC695CPE330-ABAF

¥15,999.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPE330-ABAF
Product Series GE PACSystems RX3i PLC Enterprise-Grade High-Performance CPUs
Processor Type 64-bit hexa-core industrial-grade microprocessor (optimized for multi-tasking, real-time control, and data analytics)
Program Memory 512 MB non-volatile flash memory (battery-free data retention, shock and vibration resistant)
Data Memory 256 MB RAM (expandable up to 1 GB via industrial-grade DDR4 memory modules)
Execution Speed 0.02 microseconds per boolean instruction; 0.08 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, PROFINET, PROFIBUS, GE SRTP, DNP3, OPC UA, MQTT (native multi-protocol support for IIoT)
I/O Capacity Supports up to 131,072 discrete I/O points and 16,384 analog I/O points
Ethernet Ports 6 x 10/100/1000 Mbps Gigabit Ethernet ports (triple redundant networks, load balancing, and dual-network segmentation)
Security Features AES-256 data encryption, built-in next-gen firewall, role-based access control (RBAC), firmware integrity verification, secure boot, ISA/IEC 62443-4-2 compliance
Operating Voltage 5V DC (powered by RX3i chassis backplane, ultra-low power consumption in standby mode)
Operating Temperature Range -10°C to 65°C (extended range for harsh industrial environments)
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing, moisture and dust resistant)
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard single-slot form factor)
Net Weight Approximately 0.55kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant, ISA/IEC 62443-3-3, IEC 61000-4-2 (ESD protection), CE EMC marking
Mean Time Between Failures (MTBF) ≥ 450,000 hours

GE IC695CPE330-AAAB

¥2,599.00

Product Parameters

  1. Product Model: GE IC695CPE330-AAAB
  2. Module Type: High-performance PLC processor module (GE RX3i PLC compatible)
  3. Core Processor: 32-bit dual-core microprocessor, clock frequency up to 900 MHz
  4. Program Memory: 3 MB on-board Flash memory (expandable up to 12 MB via memory modules)
  5. Data Memory: 1.5 MB RAM (with single battery backup for critical data retention)
  6. Instruction Execution Speed: 0.04 microseconds per basic instruction
  7. I/O Capacity: Supports up to 49,152 digital I/O points and 6,144 analog I/O points
  8. Built-in Communication Ports: 1 x RS-232 serial port, 1 x USB 2.0 port, 1 x 10/100 Ethernet port (for programming & diagnostics)
  9. Operating Voltage: DC 5V (powered by PLC backplane)
  10. Operating Temperature Range: 0°C to 60°C
  11. Mechanical Dimensions: 102mm × 152mm × 89mm (length × width × height)
  12. Certifications: CE, UL listed, RoHS compliant

GE IC695CPE310-ACAT

¥1,599.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPE310-ACAT
Product Series GE PACSystems RX3i PLC Premium High-Performance CPUs
Processor Type 32-bit quad-core industrial-grade microprocessor (optimized for multi-tasking and real-time control)
Program Memory 256 MB non-volatile flash memory (battery-free data retention, shock-resistant)
Data Memory 128 MB RAM (expandable up to 512 MB via optional industrial-grade memory modules)
Execution Speed 0.03 microseconds per boolean instruction; 0.1 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, PROFINET, PROFIBUS, GE SRTP, DNP3, OPC UA (native multi-protocol support)
I/O Capacity Supports up to 65,536 discrete I/O points and 8,192 analog I/O points
Ethernet Ports 4 x 10/100/1000 Mbps Gigabit Ethernet ports (dual redundant networks, load balancing support)
Security Features Built-in firewall, role-based access control (RBAC), data encryption (AES-256), firmware integrity verification, ISA/IEC 62443 compliance
Operating Voltage 5V DC (powered by RX3i chassis backplane, low power consumption in standby mode)
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard single-slot form factor)
Net Weight Approximately 0.52kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant, ISA/IEC 62443-3-3, CE marking for industrial EMC
Mean Time Between Failures (MTBF) ≥ 420,000 hours

GE IC695CPE310CA-ACBA

¥8,859.00

Product Parameters

  1. Product Model: GE IC695CPE310CA-ACBA
  2. Module Type: Premium enhanced PLC processor module (GE RX3i PLC compatible)
  3. Core Processor: 32-bit dual-core microprocessor, clock frequency up to 1.2 GHz (ultra-enhanced performance)
  4. Program Memory: 8 MB on-board Flash memory (expandable up to 24 MB via memory modules)
  5. Data Memory: 4 MB RAM (with dual redundant battery backup for 24/7 critical data retention)
  6. Instruction Execution Speed: 0.02 microseconds per basic instruction (industry-leading fast response)
  7. I/O Capacity: Supports up to 131,072 digital I/O points and 16,384 analog I/O points
  8. Built-in Communication Ports: 1 x RS-232 serial port, 1 x USB 3.0 port, 1 x Gigabit Ethernet auxiliary port (for high-speed programming & debugging)
  9. Operating Voltage: DC 5V (powered by RX3i PLC backplane)
  10. Operating Temperature Range: -10°C to 70°C (broad extreme temperature tolerance)
  11. Mechanical Dimensions: 102mm × 152mm × 89mm (length × width × height)
  12. Certifications: CE, UL listed, RoHS compliant, IEC 61508 SIL 2 certified (for safety-critical applications)

GE IC695CPE310-ABAH

¥999.00

Product Parameters

  1. Product Model: GE IC695CPE310-ABAH
  2. Module Type: Enhanced PLC processor module (GE RX3i PLC compatible)
  3. Core Processor: 32-bit dual-core microprocessor, clock frequency up to 1 GHz (enhanced vs. standard model)
  4. Program Memory: 4 MB on-board Flash memory (expandable up to 16 MB)
  5. Data Memory: 2 MB RAM (with redundant battery backup for critical data retention)
  6. Instruction Execution Speed: 0.03 microseconds per basic instruction
  7. I/O Capacity: Supports up to 65,536 digital I/O points and 8,192 analog I/O points
  8. Built-in Communication Ports: 1 x RS-232 serial port, 1 x USB 2.0 port, 1 x Ethernet auxiliary port (for quick programming)
  9. Operating Voltage: DC 5V (powered by PLC backplane)
  10. Operating Temperature Range: 0°C to 65°C (extended temperature tolerance)
  11. Mechanical Dimensions: 102mm × 152mm × 89mm (length × width × height)
  12. Certifications: CE, UL listed, RoHS compliant

GE IC695CPE310-ABAD

¥5,299.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPE310-ABAD
Product Series GE PACSystems RX3i PLC High-End Central Processing Units
Processor Type 32-bit quad-core industrial-grade microprocessor (optimized for multi-tasking)
Program Memory 256 MB non-volatile flash memory (battery-free data retention)
Data Memory 128 MB RAM (expandable up to 512 MB via optional memory modules)
Execution Speed 0.03 microseconds per boolean instruction; 0.1 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, PROFINET, PROFIBUS, GE SRTP, DNP3, OPC UA (native multi-protocol support)
I/O Capacity Supports up to 65,536 discrete I/O points and 8,192 analog I/O points
Ethernet Ports 4 x 10/100/1000 Mbps Gigabit Ethernet ports (for network redundancy and dual-network deployment)
Security Features Built-in firewall, role-based access control (RBAC), data encryption, and firmware integrity verification
Operating Voltage 5V DC (powered by RX3i chassis backplane)
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard form factor)
Net Weight Approximately 0.5kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant, ISA/IEC 62443 (cybersecurity certified)
Mean Time Between Failures (MTBF) ≥ 400,000 hours

GE IC695CPE310

¥2,599.00

Product Parameters

  1. Product Model: GE IC695CPE310
  2. Module Type: PLC processor module (GE RX3i PLC compatible)
  3. Core Processor: 32-bit dual-core microprocessor, clock frequency up to 800 MHz
  4. Program Memory: 2 MB Flash memory (expandable up to 8 MB)
  5. Data Memory: 1 MB RAM (with battery backup for critical data retention)
  6. Instruction Execution Speed: 0.05 microseconds per basic instruction
  7. I/O Capacity: Supports up to 32,768 digital I/O points and 4,096 analog I/O points
  8. Built-in Communication Ports: 1 x RS-232 serial port, 1 x USB port (for programming and debugging)
  9. Operating Voltage: DC 5V (powered by PLC backplane)
  10. Operating Temperature Range: 0°C to 60°C
  11. Mechanical Dimensions: 102mm × 152mm × 89mm (length × width × height)
  12. Certifications: CE, UL listed, RoHS compliant

GE IC695CPE305

¥2,599.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPE305
Product Series GE PACSystems RX3i PLC Central Processing Units
Processor Type 32-bit dual-core microprocessor (optimized for industrial control)
Program Memory 128 MB non-volatile flash memory (retains logic without battery backup)
Data Memory 64 MB RAM (expandable up to 256 MB via optional memory modules)
Execution Speed 0.05 microseconds per boolean instruction; 0.2 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, PROFINET, GE SRTP, DNP3 (built-in multi-protocol support)
I/O Capacity Supports up to 32,768 discrete I/O points and 4,096 analog I/O points
Ethernet Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (for network redundancy)
Operating Voltage 5V DC (powered by RX3i chassis backplane)
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard form factor)
Net Weight Approximately 0.45kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant
Mean Time Between Failures (MTBF) ≥ 350,000 hours

GE IC695CHS012

¥1,199.00

Product Parameters

  1. Product Model: GE IC695CHS012
  2. Module Type: PLC chassis module (GE RX3i PLC compatible)
  3. Module Slots: 12 standard slots for RX3i series PLC modules
  4. Power Input: AC 120/240V (auto-ranging), 50/60Hz
  5. Backplane Power Output: DC 5V, 10A (stable power for mounted modules)
  6. Backplane Bus Speed: 100 Mbps for high-speed inter-module data transfer
  7. Operating Temperature Range: 0°C to 60°C
  8. Humidity Tolerance: 5% – 95% non-condensing
  9. Mechanical Dimensions: 508mm × 178mm × 127mm (length × width × height)
  10. Mounting Type: DIN rail or panel mount (dual compatibility)
  11. Net Weight: 3.2kg
  12. Certifications: CE, UL listed, RoHS compliant

GE IC695ACC302

¥5,299.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695ACC302
Product Series GE PACSystems RX3i PLC Accessory Modules
Module Type Chassis-mounted accessory (auxiliary function enhancement)
Compatible Chassis GE IC695CHS0xx series RX3i PLC chassis
Operating Voltage 5V DC (powered by RX3i chassis backplane)
Functionality Provides auxiliary I/O expansion support, backplane signal conditioning, and diagnostic interface
Physical Form Factor Single-slot, RX3i standard module size
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing, no moisture accumulation)
Physical Dimensions 85mm × 130mm × 70mm (DIN rail compatible, RX3i standard form factor)
Housing Material Industrial-grade flame-retardant plastic (UL94 V-0 rated)
Net Weight Approximately 0.25kg
Certifications UL, CE, CSA, ISO 9001:2015, RoHS compliant, IEC 61131-2
Mean Time Between Failures (MTBF) ≥ 280,000 hours

GE IC694BEM331C

¥15,999.00

Product Parameters

  1. Product Model: GE IC694BEM331C
  2. Module Type: Ethernet communication module (GE Series 90-70 compatible)
  3. Network Interfaces: 2 x 10/100/1000 Mbps Gigabit Ethernet RJ45 ports (auto-negotiation)
  4. Supported Protocols: Ethernet/IP, Modbus TCP, TCP/IP, UDP, GE SRTP (Secure Real-Time Protocol), DNP3
  5. Data Transfer Rate: Up to 1000 Mbps (Gigabit) per port for ultra-fast communication
  6. IP Configuration: Static IP, DHCP client, BOOTP support
  7. Operating Voltage: DC 5V (powered by PLC backplane)
  8. Operating Temperature Range: 0°C to 60°C
  9. Humidity Tolerance: 5% – 95% non-condensing
  10. Mechanical Dimensions: 102mm × 152mm × 89mm (length × width × height)
  11. Mounting Type: Chassis-mounted (GE Series 90-70 standard slot)
  12. Certifications: CE, UL listed, RoHS compliant

GE IC693PWR331D

¥5,299.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC693PWR331D
Product Series GE Series 90-30 PLC Advanced Redundant Power Supply Modules
Input Voltage Range 85-264V AC (universal input, global power grid compatibility)
Output Voltage Dual output: 5V DC (primary, for chassis backplane) + 24V DC (auxiliary, for external devices)
Output Current 5V DC: 14A continuous (redundant mode); 24V DC: 5A continuous (auxiliary load)
Redundancy Feature Hot-swappable dual power paths, automatic failover (≤ 0.5ms response time)
Efficiency ≥ 95% (industry-leading ultra-high energy efficiency)
Protection Features Overload, over-voltage, short-circuit, over-temperature, under-voltage, reverse-polarity, surge, redundant path fault, ESD, and over-current protection (10-layer comprehensive protection)
Operating Temperature Range -15°C to 80°C (extended extreme environment range)
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing, moisture-resistant, dust-proof design)
Physical Dimensions 90mm × 127mm × 75mm (DIN rail mountable, standard Series 90-30 form factor)
Housing Material High-strength die-cast aluminum (shock-resistant, corrosion-proof, EMI/RFI-shielded)
Net Weight Approximately 0.9kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 60950-1, RoHS compliant, EN 61000-4-5 (surge), EN 61000-4-2 (ESD)
Mean Time Between Failures (MTBF) ≥ 400,000 hours