Model number: ATS48C32Q, a member of the Schneider Electric ATS48 series.
Rated current: 320A for heavy duty applications
Rated voltage: AC 380V three-phase, suitable for a variety of industrial occasions
Motor power: Suitable for 160kW motor
Dimensions: Width 320mm x height 380mm x depth 265mm, suitable for wall mounting
Weight: Approximately 18.2kg, which may vary slightly depending on configuration
Based on PowerPC architecture, with high speed instruction processing capability and high reliability
Support a variety of different operating systems and development environments, easy for users to develop and debug
Equipped with high capacity random access memory (RAM) and non-volatile memory, both up to 64MB, helps to process and store large amounts of data quickly.
Equipped with a high-speed microprocessor, the clock speed reaches 1.8 GHz and the scan rate is 0.024 milliseconds per 1000 Boolean contacts/coils
Processor: Equipped with a Pentium-M microprocessor or PowerPC® e500mc processor architecture, depending on the specific version.
Memory: Loaded with 64 MB of user memory and 64 MB of user flash memory.
Clock Speed: Typically operates at 1.6 GHz to 1.8 MHz, providing fast program and application execution.
Dimensions: Approximately 200 mm x 150 mm x 70 mm, allowing for efficient rack mounting.
Weight: Around 2 kg, ensuring portability and ease of installation.
Model: HC422B N-300
Brand: Toshiba
Power Supply: Three-phase AC, 380V
Rated Power: 300W
Rated Torque: 1.5Nm
Rated Speed: 3000rpm
Speed Control Accuracy: ±0.05%
Torque Control Accuracy: ±0.1%
Overload Capacity: 150% for 1 minute, 200% for 0.5 seconds
Protection Level: IP65
Operating Temperature Range: -10°C to +40°C
Model : PM511V08
main role : used for analog signal acquisition and communication, analog signal exchange with sensors, actuators and other equipment
dimensions : length 274.5mm, width 270mm, height 27mm (or length 170mm, width 105mm, height 32mm, the specific data shall be subject to official data)
weight : approx. 0.76kg (or 0.4KG, data from different sources may vary slightly, please refer to the official data)
Model : MS-NAE5510-3
Dimensions : 222 mm x 111 mm x 44 mm (8.75 “x 4.37” x 1.75 “)
Weight : One says 1.13 kg(2.49 LBS)1, the other says 2kg
Power supply : 24 VDC
power consumption : typical value 15 watts, maximum 25 watts
communication protocol : BACnet/IP, BACnet MS/TP, LonWorks, etc
point capacity : The maximum support 30,720 points
Storage capacity : 2 GB non-volatile flash
: F8627X is a controller processor module which may belong to a certain brand of automation control system component
function : used for industrial automation control, to achieve input and output drive and power management functions
Electrical parameters : may include working voltage, current, power, etc. For details, refer to the product specification
Performance parameters : such as processing speed, response time, accuracy, etc., also need to be determined according to the product manual
functions : SYN5202 is an automatic quasi-synchronous device of ABB brand, which is used for parallel operation of generators in power system to ensure that generators can be quickly pulled into synchronous operation with minimum impulse current to ensure the safety of power grid and units
quasi-synchronous mode : adjust the generator speed and excitation device to make the generator voltage and frequency close to the system value, and turn on the circuit breaker when the phase Angle difference is zero
functions : DC feedback power supply board for industrial equipment and systems to provide stable DC power
Input voltage : 38 to 115 VAC, which can be supplied directly to via the control power transformer
Output voltage and current : Provide different voltage and current output according to requirements to meet the power requirements of each device in the system
Frequency range : 0 to 500 kHz, depending on input voltage
protection features : with overload, overheat, short circuit and other multiple protection functions
Bandwidth: 150MHz
Rising time: ≤2.3nS
Sampling rate range: 1GS/s, equivalent to 50GS/s
Vertical deflection coefficient: 2mV/div ~ 5V/div
Record length: 2 x 512 k
Scanning time base: 2ns~50s/div
Trigger type: edge, pulse width, video, alternate
Ports: USB Device, USB Host, and Pass/Fail are standard configurations, and LAN is optional
Usage: MOOG amplifier G122-829-001 is a high frequency power amplifier, used in the final stage of the transmitter, the role is to amplify the high frequency modulated wave signal to meet the transmission power requirements.
Effect: The amplified signal is radiated into space through the antenna to ensure that the receiver in a certain area can receive a satisfactory signal level, and does not interfere with the communication of adjacent channels.
As a high-frequency power amplifier, the G122-829-001 has the ability to amplify high-frequency signals to meet transmission power requirements.
Voltage: 24V DC
Current Range: 100-400A
Weight: 2KG
Series: Emerson VE Series Controller
Dimensions:
Exact dimensions are not provided in the search results.
Redundancy: VE4033S2B1 typically has multiple input channels, with each channel featuring redundant input functionality. This ensures that the system can automatically switch to a backup input signal if one fails
High Reliability: Thanks to its redundant input capability, the analog input card provides increased system reliability and fault tolerance