Showing 10633–10644 of 20827 results
¥ 2,265.00
Parameters and Specifications :
Type : Field Control Processor 270 (FCP270)1
Memory :
SDRAM: 16 MB
Flash Memory: 32 MB1
Input Voltage (Redundant Voltage) : 24 V DC typical1
Power Consumption (per Non-Fault-Tolerant Module) : Max 8.5 W1
Operating Temperature : 0 to +60°C (+32 to +140°F)1
Dimensions and Weight :
Size : Length 14.7 cm, Width 5.15 cm, Height 11.4 cm1 2 3
Weight : 0.6 kg1 2 3
Shipping Weight : 1.5 kg
¥ 3,124.00
Parameters and Specifications :
Manufacturer : GE Fanuc
Product Number : IC693CPU374
CPU Type : Single-slot CPU module with embedded Ethernet interface
Processor Speed : 133 MHz
Processor Type : Embedded 586
Typical Scan Rate : 0.15 milliseconds per 1K logic (Boolean contacts)
Storage Type : RAM and Flash
User Memory (Total) : 240KB
Protocol Support : SNP and SNPX on RS-485 port, SRTP, and Ethernet Global Data (EGD)
Built-in Ethernet Communication : Ethernet (internal) – 10/100 base-T/TX Ethernet switch
Ethernet Port Quantity : Two, with auto-sensing 10/100baseT/TX ports
¥ 2,208.00
Parameters and specifications:
Dimensions: Length 334.6mm, width 121.9mm, height 21mm
Weight: 0.42kg
Port type: USB 2.0, DC power supply port
Ammeter specification: Includes voltage, resistance and 400A current
Function: Used as an interface to connect different types of modules, you can connect digital input/output modules, analog input/output modules, communication modules, etc
¥ 2,623.00
Parameters and Specifications :
Brand : MOTOROLA
Model : MVME162PA-344SE
Type : Embedded Controller1
Operating Temperature Range : Not explicitly stated, but likely suitable for industrial environments.
Ambient Temperature : 110.2℃1
Protection Class : IP231
Resolution : 0.00013
Accuracy : 0.1 mN/m1
Maximum Motor Power Rating : 100.56 KW1
Pole Count : 3 Poles1
Altitude : 200.25 m3
Executes Quality Standards : IEC61000-4-301
¥ 2,302.00
Parameters and Specifications :
Input Voltage : AC220V/380V±10% 50Hz±11
Output Current : 0-20kA (customizable based on customer needs)1
Output Capacity : 0-200kVA1
Environmental Temperature : -20°C to 50°C1
Current Accuracy : ≤1.5% (F.S)1
Communication Protocol : Ethernet/IP2
¥ 2,326.00
Parameters and Specifications:
Processor: 16-bit
User Program Memory: 64 KB
Data Memory: 32 KB
Digital Inputs: 16
Digital Outputs: 16
Analog Inputs: 8
Power Supply: 24 V AC/DC
Dimensions and Weight:
Size: 90 x 110 x 60 mm
Weight: 1.2 kg
¥ 2,302.00
Parameters and Specifications :
Type : Motor Protection Relay
Voltage Rating : Specified in the datasheet or product specifications
Current Rating : Specified in the datasheet or product specifications
Protection Functions : Overload, short-circuit, phase loss, earth fault, etc.
Accuracy : Specified in the datasheet or product specifications
Communication : Supports various communication protocols (e.g., Modbus, Profinet, etc.)
¥ 3,032.00
Parameters and Specifications :
Type : USB 3.0 Host Controller
Interface : USB 3.0 SuperSpeed (up to 5 Gbps)
Ports : Number of ports may vary depending on the specific implementation or module.
Compatibility : Supports USB 2.0 and USB 1.1 devices as well.
Dimensions and Weight :
Weight : Also not readily available as it depends on the specific module or implementation.
¥ 2,235.00
Parameters and Specifications :
Model : D20-EME
Brand : GE (General Electric)
Type : (Likely a component or device from GE’s industrial or power generation products)
Electrical Rating : Specific ratings would depend on the intended application and configuration.
Environmental Ratings : Likely designed for industrial or power plant environments.
¥ 2,021.00
Parameters and Specifications :
Signal Type : Analog input module
Channels : 4 channels
Input Range : ±10 V, ±5 V, ±2.5 V, ±1 V, 0 to 10 V, 0 to 5 V (selectable per channel)
Resolution : 16 bits
Sampling Rate : Up to 250 kS/s per channel
Accuracy : Specified in the NI documentation
Input Impedance : Specified in the NI documentation
¥ 2,562.00
Parameters and Specifications:
Type: Electronic power board
Application: Used in excitation systems of electric generators
Power Output: Provides the required power voltage and current for the excitation system
Voltage Regulation: Adjusts the output voltage of the electric generator based on need
Overcurrent Protection: Protects the excitation system from damage due to current overload
Communication Interface: May include interfaces for communication and data transmission with generator control or monitoring systems
Operating Temperature: (-22°F to +150°F) or (0-55℃)
Humidity: 95%, non-condensing
¥ 2,025.00
Parameters and Specifications:
Processor: MC68020 microprocessor and MC68881 coprocessor
Features: Intelligent single-board processor module
Maximum Continuous Output Current: 0.5 A
On-board Diagnostics: Advanced vehicle diagnostics
Safety Integrity Level (SIL): SIL3
Compliance: EN 954-1 Category 4