Work Voltage: Depending on the specific model or application, it can vary. Some listings mention 24V, while others indicate higher voltages like 180V12.
Output Frequency: Also varies. Some sources state 50kHz1, while others mention 220Hz or 60Hz23.
2.Specifications:
Type: PLC Controller Module
Data Capacity: Can be up to 256MB for certain models3.
Speed: For some MPC270 models, the CPU speed can reach 160MHz3.
I/O Points: Depending on the application, I/O points can range from 2048 to 1000 input/output points24.
High performance and stability: provides precise control and response.
Multiple protection and diagnostic functions: overload protection, overheat protection, fault diagnosis and other functions may be available to ensure the safe and reliable operation of the system.
Good compatibility and scalability: It can be used with a variety of servo motors and control systems to meet different application requirements.
Multiple bus options including EtherCAT®, EtherNet/IP, PROFINET RT, Modbus/TCP, CANopen® and SynqNet™.
Easy to use and program: Features plug-and-play motor setup, advanced automatic tuning, and an intuitive graphical interface for programming and troubleshooting.
argument
Input voltage: Usually 24V DC, but may vary according to the application scenario
Working voltage: 24V
Rated voltage: 24V
Power supply voltage: 220V
Rated current: 5A
System memory: 8MB
Memory expansion capacity: 128MB
Display color: 99.9% (may refer to the color depth or number of colors on the display)
Working temperature: The working environment temperature is -40 to 100℃
Communication interface: Support HDMI interface
Output power: 450W
Efficiency: up to 85%
specification
Product series: FC-PSU series
Product type: System power module
Size and weight
Size:
126mm x 88mm x 31mm (one way of saying)
166mm x 112mm x 36mm (another word)
Another claim is 36*42mm
Weight: 1.3 kg (by one account), 2KG by another
argument
Drive type: Digital servo drive
Control type: speed closed loop, position closed loop
Input power supply: single-phase or three-phase AC power supply, rated voltage range 200-480V (otherwise stated as 110-230V)
Output current: Maximum continuous output current up to 30A (rated current 10A RMS)
Communication interface: RS-232, CANopen, EtherCAT and other interfaces are available
Encoder support: Support for various types of encoder feedback signals
Control accuracy: Position control accuracy less than 1 arc-min, speed control accuracy less than 0.01% (based on rated load)
Response time: as low as 0.6ms (based on 20% load variation)
High speed: up to 8000rpm
Power supply voltage:
Rated control circuit power supply voltage US: 18 V DC… 30 V DC (including all tolerances, including residual pressure)
Typical control supply current IS 110 mA
Input voltage range: 100-240VAC
Response time: up to 30 ms (plus response time of PSR-TS-SDOR4)
Recovery time: < 10 s
Delay time: Typical value 20 ms (depending on load, in case of voltage drop US)
specification
Product type: Safety equipment
Number of available expansion modules: 1 (maximum continuous current through PSR-TBUS: 4 A)
Overvoltage category: III
Pollution level: 2
Maximum power consumption under rated conditions: 6,372MW (under certain conditions)
Size and weight
Product size: 115mm x 48mm x 150mm
Product weight:
Approx. 1.2kg (one source)
About 0.3kg
