The HITACHI LPA245A Module is a high-performance, low-power, compact and lightweight module that integrates a GPS receiver, an antenna and a processor into a single device.
Power Supply Voltage: 3.3V
Frequency: L1, 1575.42 MHz
Channels: 32
Tracking Sensitivity: -165 dBm
Cold Start Time: 35 s
Warm Start Time: 34 s
Hot Start Time: 1 s
This module features a high-quality amplifier and speaker system, providing clear and powerful sound in a compact package. It also includes advanced audio processing capabilities, ensuring that your audio is crisp and clear.
Rated Power Output: 3W
Impedance: 4 ohms
Frequency Range: 20Hz – 20kHz
Distortion: < 10% Sensitivity: 85dB Signal to Noise Ratio: > 80dB
The ICS TRIPLEX+T8431 is a versatile module that can be used for a wide range of applications. It features 16 analog inputs and 16 digital outputs, along with a variety of communication options, including Ethernet and Modbus.
Analog Inputs: 16
Digital Outputs: 16
Communication: Ethernet, Modbus
Type: Solid-State Relay
Input Voltage Range: Specifies the voltage range required to activate the solid-state relay.
Output Voltage Range: The voltage range that the solid-state relay can switch and control.
Load Capacity: The maximum power or current rating that the relay can handle.
Switching Speed: The speed at which the relay can switch on and off.
Isolation Voltage: The maximum voltage the relay can withstand between input and output without breakdown.
Control Interface: The type of control signal (e.g., digital, analog) required to activate the relay.
Type: Converter/Interface Module
Protocol Conversion: Ability to convert between Ethernet/IP and ASCII protocols.
Number of Ports: Specifies the number of physical or logical ports available for connectivity.
Data Rate: The maximum speed at which data can be transmitted through the module.
Power Requirements: Specifies the voltage and current required to operate the module.
Physical Dimensions: Length, width, and height of the module.
Environmental Ratings: Operating temperature range, humidity tolerance, and any other relevant environmental specifications.
Type: Process Controller
Input Signal Range: The range of analog input signals that the controller can accept.
Control Output: The type and range of the control output signal (e.g., analog voltage or current).
Control Modes: The different control algorithms or modes supported by the controller (e.g., PID, on/off).
Accuracy: The degree of precision with which the controller measures and controls the process variables.
Communication Interfaces: Available interfaces for connecting to other devices or systems (e.g., RS-232, RS-485, Ethernet).
Display: Type and resolution of the controller’s display (if applicable).
Power Requirements: The voltage and current required to operate the controller.
Environmental Ratings: Operating temperature range, humidity tolerance, and any other relevant environmental specifications.
The WOODWARD-8237-1596 Module is a high-performance module designed to meet the needs of demanding industrial applications. It offers reliable and accurate performance in a compact and rugged package.
Input voltage: 24 VDC
Output voltage: 0-10 VDC
Output current: 4-20 mA
Operating temperature: -40°C to 85°C
Dimensions: 3.5″ x 4.0″ x 1.5″
Model: SDSC-CON-2B REV 3ADT309600R0012
Brand: ABB (based on brand information mentioned several times in search results)
The product may be a DC governor or an input/output module, depending on the context. In some search results, it is described as part of the DCS600 motherboard
According to one search result, the weight of similar products is mentioned as 0.2kg2, but the specific weight information for SDSC-CON-2B REV 3ADT309600R0012 is not given directly. Therefore, the actual weight may vary, please refer to the official data.
The Bently Nevada 330103-00-03-05-02-05 Sensor is designed to detect vibrations in machinery and equipment. It is typically used in industrial settings to monitor the health of machines and detect potential problems before they become serious. The sensor is highly sensitive and can detect even small vibrations, making it an essential tool for preventive maintenance.
Model Number: 330103-00-03-05-02-05
Type: Vibration Sensor
Frequency Range: 10 Hz to 1 kHz
Sensitivity: 100 mV/g
Temperature Range: -50°C to +120°C
Connector Type: 2-pin Mil-C-5015
The A800 NVLink 8Card Module is designed to be used in conjunction with NVIDIA’s DGX A100 system, providing additional GPU compute power for high-performance computing workloads. Each module contains 8 NVIDIA A100 GPUs, each with 40 GB of high-bandwidth memory (HBM2) and a total of 81920 CUDA cores.
8 NVIDIA A100 GPUs
40 GB HBM2 memory per GPU
81920 CUDA cores per module
320 GB/s inter-GPU bandwidth via NVLink
Designed for use with NVIDIA DGX A100 system
Architecture: NVIDIA Ampere
CUDA Cores: 6,912
Tensor Cores: 432
Memory: 40/80 GB HBM2
Memory Bandwidth: 1.6 TB/s
Form Factor: PCIe Gen4
Thermal Solution: Passive
The ABB 5SHY4045L0003-3BHE019719R0101 module is a high-quality, reliable component designed for use in a variety of industrial applications. It is a compact and lightweight module that is easy to install and operate.
Input voltage: 24V DC
Output voltage: 24V DC
Maximum output current: 4.5A
Operating temperature range: -40°C to 70°C
Dimensions: 45mm x 125mm x 130mm
Weight: 0.5 kg