Size:
150mm x 50mm x 30mm (common)
170mm x 105mm x 32mm (specific version)
Weight:
0.5kg (common)
Approx. 120g (specific version)
2KG (specific version)
Model: VE3008
Input voltage:
AC220V (Common)
12-48VDC (specific version)
30g
Other versions may be heavier, such as 2KG
Insulation resistance: 100MΩ, indicating that it has good insulation performance.
Compressive strength: AC2.5kV/1min, indicating that it can still maintain stability and safety under high voltage.
Rated current: Depending on the specific application scenario, it may vary, but some applications mention 20A
Accuracy: ±0.5%, indicating that it has high accuracy in current measurement.
Frequency range: DC-100kHz, suitable for a wide range of frequencies.
Input signal: -10 Vdc to +10 Vdc
Shaft and sensor power supplies: -24 Vdc
Power consumption: 7.7 Watts (some versions may vary, such as 5W)
Data transfer rate: 9600 baud
Delay time: ≤1 ms
Working temperature:
25 ° C (normal)
-40°C to +85°C (high performance version)
Interface: VMEbus
Number of channels:
Number of analog input channels: 16
Number of analog output channels: 16 bits
Digital I/O: 32 lines
Resolution:
Analog input/output resolution: 16 bits
ADC sampling rate: 500ksps
DAC output rate: 1Msps
Operating temperature: 0 ~ 60℃
Storage temperature: -40℃~ 70℃
Humidity: 5% ~ 95%, no condensation
Power Supply: The 120/230V AC version provides an internal 24VDC power supply to protect against short circuits and overloads
Dimensions: 5.37 x 3.5 x 1.25 inches (136.5 x 88.9 x 31.8 mm)
Weight:
0.39kg (one way to say it)
4.40 pounds
Processor: The PM861AK01 uses a high-performance 32-bit microprocessor that is also part of ABB’s AC 800M control system as the core processor unit of the system
Memory: There is 2M Flash writable memory and 2M RAM on the board for storing user programs, data and control programs
Interface: 100Pin high-density shielded cable is used with external interface, and can be converted into D-type plug direct connection mode through interconnection module. In addition, it also supports Ethernet, serial port, CAN bus and other interfaces
Power supply: DC 24V2, other sources mention DC9-36V wide redundant dual power supply.
Size:
220 mm x 176 mm x 89 mm (one way of saying)
170mm x 70mm x 85mm (for DC 12V version only)
112mm×70mm×123mm (another possibility)
100mm x 50mm x 25mm (another way of saying, only for DC 12V version)
Weight:
150g (for DC 12V version only)
100g
Processor:
The initial version is likely to be powered by a Pentium® III processor up to 1.26 GHz with 512 Kbyte advanced transfer cache
The other configuration uses a Freescale PowerPC 7447A processor at 1.267GHz
Memory:
The initial release supports PC133 SDRAM of up to 512 Mbyte, achieved through a single 144-pin SODIMM
The other configuration supports up to 4GB DDR2 SDRAM
Storage:
The initial version has a built-in 815E chipset AGP graphics adapter, supplemented by 4 Mbyte external synchronous DRAM cache
Supports the CompactFlash Type II card as the storage medium
Processor: The industrial-grade TDA4VM processor based on the Arm Cortex ensures the efficiency and reliability of the module in handling complex control and computing tasks
Programming language: Support a variety of security programming languages, such as the IEC 61131-3 standard PLC programming language, users can customize security logic to meet specific application needs
Communication interface: usually has a variety of communication interfaces, such as Ethernet, serial port, Profibus, etc., can be used for data exchange and remote monitoring with other devices and systems
Input voltage: 24V DC
Output voltage: 0-10V DC
Maximum output current: 500mA
Operating temperature: -20℃ ~ 60℃
Size: 120mm x 80mm x 40mm
Operating frequency: 64 MHz
Processor type: Microprocessor 80486DX with 32-bit floating point computing capability
Program and data memory: The Mbyte battery supports CMOS RAM, where 512 Kbytes of memory is available for the user’s applications and data
Clock accuracy: 3.5 seconds per day (Max.), internal timing accuracy 0.01% (Max.)
Operating temperature range: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) when forced air cooling.
Operating voltage: Different sources mention voltages that may be 24VDC, 10-30VDC, or others, depending on the application scenario and configuration.
Rated voltage: 220-240V
Rated current: 45A
Frequency: 50/60Hz
Number of poles: 2P
Breaking capacity: 10kA
Rated remaining working current: 30mA
Rated remaining non-working current: 15mA
Rated remaining on/off capacity: 500A
Maximum discharge current: 20kA
Maximum continuous operating voltage: 275V AC
Response time: Less than 25 nanoseconds
Processor: The 1.8GHz Pentium M processor provides powerful computing power.
Memory: Up to 64 MB of user memory and 64 MB of user flash memory are supported for fast data transfer and storage.
Communication interface: Provides three serial ports to connect to various external devices, and may support other communication methods such as Ethernet.
Power supply: 24 VDC12, there are also references to 12 VDC (maximum power consumption does not exceed 5W), the specific may vary by application.
Operating temperature: Depending on the data, the temperature range may vary, such as -40°C to +70°C5, or -40°C to +85°C.
Size: 8.38 inches x 6.69 inches x 2.17 inches (or 212.8 mm x 170 mm x 55 mm).
Weight: 2.0 LBS (or 0.91 kg)