Showing 289–300 of 19874 results
¥ 25,899.00
¥ 999.00
Device Type: Analog output module for industrial PLC control systems
Number of Channels: 8 independent isolated analog output channels
Output Signal Types: 4–20 mA DC (sinking/sourcing configurable), 0–10 V DC
Output Accuracy: ±0.1% of full scale
Output Resolution: 16-bit
Load Capacity: 4–20 mA channel: Max. 500 Ω; 0–10 V channel: Min. 10 kΩ
Isolation Level: 250 V AC (channel-to-channel, channel-to-backplane) for 1 minute
Power Supply: Powered by AC 800M PLC backplane (24 V DC)
Operating Temperature Range: -25°C to +60°C
Protection Class: IP20 (rack mounting in control cabinet)
Communication Interface: ABB proprietary backplane bus (high-speed communication with controller)
Dimensions (W×H×D): 48.2 mm × 175 mm × 210 mm (standard rack-mounted size)
Weight: 0.7 kg
Sale!
¥ 21,599.00¥ 8,999.00
Device Type: Digital input module for WESTINGHOUSE Ovation DCS
Compatibility: Westinghouse Ovation DCS (Version 3.x to 10.x), Ovation controllers (e.g., Ovation 1C31227G01), Westinghouse I/O chassis, Ovation Engineering Tools software, third-party safety systems (via hardwired interlocks)
Core Functions: Discrete signal acquisition, noise filtering, signal status monitoring, channel diagnostics, fault alarm output
Channel Configuration: 16 independent digital input channels (group isolation)
Supported Signal Types:
Dry contact signals (NO/NC configurable)
Active digital signals (24V DC, sourcing/sinking configurable)
Signal Processing Parameters:
Response Time: ≤ 1ms (typical), ≤ 3ms (maximum)
Input Voltage Range: 20–30V DC (operating), 5V DC (minimum detection threshold)
Input Current: 5–10mA per channel (active signal mode)
Noise Filtering: Configurable digital filters (0.1–100ms) to suppress electromagnetic interference (EMI)
Isolation:
Channel-to-Channel: 500V AC (galvanic isolation)
Channel-to-Power: 1000V AC (reinforced isolation)
Power Supply:
Input Voltage: 24V DC ±10% (from Ovation chassis)
Power Consumption: ≤ 8W (no load), ≤ 12W (full load)
Environmental Specifications:
Operating Temperature: -40°C to +70°C (extended range)
Relative Humidity: 5–95% RH (non-condensing)
Protection Class: IP20 (for cabinet mounting)
Physical Dimensions:
Size (W x H x D): 100mm x 220mm x 150mm (standard DIN rail/card rack mounting)
Weight: Approximately 0.9kg
Protection Features:
ESD Protection: ±25kV (contact discharge), ±30kV (air discharge)
EMI Filtering: Complies with EN 55011/EN 55022 Class B
Overvoltage Protection: Up to 60V DC per channel
Short-Circuit Protection: Current-limiting design to prevent channel damage
Additional Functions:
Status Indicators: LED lights for power, channel activity, and fault status (per channel)
Configuration: Via Ovation Engineering Tools software
Hot-Swappable: Supported with compatible Ovation chassis (no system shutdown required)
Diagnostics: Real-time monitoring of open circuits, short circuits, and overvoltage faults; up to 100,000 fault logs (exportable to CSV)
Device Type: Multi-axis motion controller module for YASKAWA automation systems
Core Function: Precise motion control (positioning, speed, torque control), trajectory planning, and PLC integration for automated production processes
Axis Support: Controls up to 32 servo axes (synchronous or asynchronous operation), supports linear/circular interpolation and electronic gearing/camming
Control Precision: Positioning accuracy ±0.1 μm (with high-resolution encoders), speed regulation accuracy ±0.01%
Motion Modes: Point-to-point positioning, continuous path control, jog mode, torque/speed control, and custom motion profiles
Communication Interfaces: Ethernet/IP, PROFINET IRT, EtherCAT (real-time motion bus), RS-485 (for auxiliary communication)
Supported Protocols: Modbus TCP, Ethernet/IP, PROFINET, EtherCAT, YASKAWA’s proprietary MECHATROLINK-III
PLC Compatibility: Seamless integration with YASKAWA MP Series PLCs (e.g., MP3300/MP2300), compatible with third-party PLCs (Siemens S7, Allen-Bradley ControlLogix) via standard industrial protocols
Programming Software: YASKAWA MotionWorks IEC (compliant with IEC 61131-3 standard), supports ladder logic, function block diagram (FBD), and structured text (ST)
Input/Output: 32 digital inputs (24VDC), 32 digital outputs (24VDC, 0.5A per channel), 4 analog inputs (16-bit, 0-10V/4-20mA)
Operating Environment: Temperature range -10°C to +55°C, protection class IP20 (panel mounting), resistance to electromagnetic interference (EMI) per IEC 61000-4
Power Requirements: 24VDC ±10% power supply, power consumption ≤25W
Certifications: UL, CE, FCC, RoHS compliant
¥ 25,999.00
Brand: Honeywell
Model: HONEYWELL FC-USI-0002
Product Type: Universal Serial Interface Module (Industrial Automation)
Supported Interfaces: 4 independent ports (configurable as RS-232, RS-422, or RS-485)
Supported Protocols: MODBUS RTU, MODBUS ASCII, DF1, Honeywell Proprietary Protocols
Baud Rate: 300 bps to 115.2 kbps (configurable per port)
Data Bits: 7 or 8 bits
Parity: None, Odd, Even, Mark, Space
Stop Bits: 1, 1.5, or 2 bits
Data Buffering: Up to 10,000 data points (local buffering)
Host Interface: ControlNet, Ethernet/IP (compatible with Honeywell ControlEdge PLC/Experion PKS DCS)
Power Supply: 24 VDC (±10%), Power Consumption ≤ 15 W
Operating Temperature: -40°C to +70°C
Storage Temperature: -55°C to +85°C
Protection Rating: IP20
Housing Material: Metal (aluminum alloy)
Mounting Type: 35 mm DIN Rail Mount
Dimensions (L×W×H): 140 mm × 110 mm × 75 mm
Weight: Approximately 0.6 kg
Compatibility: Honeywell ControlEdge PLC, Experion PKS DCS, third-party serial devices (sensors, transmitters, actuators)
Certifications: CE, UL, CSA, ATEX (Zone 2/22), IECEx, FCC, RoHS
Sale!
¥ 5,299.00¥ 3,999.00
Brand: ProSoft Technology
Model: PROSOFT MVI46-MNET
Device Type: Modbus Communication Module (for Allen-Bradley ControlLogix PLC)
Supported Protocols: Modbus RTU (RS485), Modbus TCP/IP (Client/Server)
Communication Ports: 2 x RS485 (half-duplex, 9600-115200 bps), 1 x 10/100 Mbps Ethernet (RJ45)
Maximum Nodes: 32 Modbus RTU slaves, Unlimited Modbus TCP clients (based on bandwidth)
PLC Compatibility: Allen-Bradley ControlLogix L6x/L7x PLC chassis (1756 chassis)
Data Memory: 8 KB shared memory for PLC-Modbus data exchange
Operating Voltage: Powered via ControlLogix chassis backplane (5 VDC)
Power Consumption: Maximum 3.5 W
Operating Temperature: 0 °C to +60 °C
Storage Temperature: -40 °C to +85 °C
Relative Humidity: 5% to 95% (non-condensing)
Protection Rating: IP20 (chassis-mounted)
Dimensions (W x H x D): 130 mm x 80 mm x 160 mm (ControlLogix chassis compatible)
Certifications: CE, UL, CSA, FCC Class A
Sale!
¥ 12,999.00¥ 5,499.00
Brand: ProSoft Technology
Model: PROSOFT MVI69-PDPMV1
Device Type: Profibus DP Master/Slave Communication Module
Supported PLCs: Rockwell Automation CompactLogix (1769 chassis), MicroLogix (1761/1762/1763)
Supported Protocol: Profibus DP V1/V2 (EN 50170)
Communication Port: 1 x Profibus DP (RS485, half-duplex, 9.6 kbps to 12 Mbps)
Operational Modes: Profibus DP Master (up to 124 slaves), Profibus DP Slave
Maximum Data Exchange: 244 bytes Input / 244 bytes Output (per slave)
Backplane Interface: CompactLogix 1769 chassis backplane, MicroLogix expansion interface
Data Memory: 8 KB shared memory for PLC-Profibus data exchange
Operating Voltage: Powered via PLC chassis/expansion bus (5 VDC)
Power Consumption: Maximum 4.0 W
Operating Temperature: 0 °C to +60 °C
Storage Temperature: -40 °C to +85 °C
Relative Humidity: 5% to 95% (non-condensing)
Protection Rating: IP20 (chassis/DIN-rail mounted)
Dimensions (W x H x D): 32 mm x 100 mm x 125 mm (CompactLogix); 35 mm x 100 mm x 110 mm (MicroLogix)
Certifications: CE, UL, CSA, FCC Class A, Profibus Conformance Tested
¥ 21,599.00
Brand: ProSoft Technology
Model: PROSOFT MV156E-MNETC
Device Type: Industrial Communication Gateway (Modbus to Ethernet/IP)
Supported Protocols: Modbus RTU (RS485), Modbus TCP, Ethernet/IP (Client/Server)
Communication Ports: 1 x RS485 (half-duplex, 9600-115200 bps), 2 x 10/100 Mbps Ethernet (RJ45)
Data Transfer Rate: Up to 100 Mbps (Ethernet), Up to 115200 bps (RS485)
Maximum Nodes: 32 Modbus RTU slaves, Unlimited Ethernet/IP clients (based on bandwidth)
Operating Voltage: 24 VDC (±10%)
Power Consumption: Maximum 2.5 W
Operating Temperature: -40 °C to +70 °C
Storage Temperature: -40 °C to +85 °C
Relative Humidity: 5% to 95% (non-condensing)
Protection Rating: IP20 (DIN-rail mount)
Dimensions (W x H x D): 35 mm x 100 mm x 120 mm (DIN-rail compatible)
Certifications: CE, UL, CSA, Class I Div 2 (Hazardous Locations)
Sale!
¥ 5,299.00¥ 3,999.00
Brand: EMERSON
Model: EMERSON 5X00497G01
Product Type: Industrial analog input module (DCS/PLC-compatible)
Core Function: Acquires, conditions, and converts analog sensor signals into digital data for industrial controllers
Number of Input Channels: 8 differential channels (independently configurable)
Supported Signal Types:
Current: 4–20 mA (two-wire/three-wire/four-wire compatible)
Voltage: 0–10 VDC, 1–5 VDC
Thermocouple: J/K/T/E/R/S/B/N/C type (built-in cold junction compensation)
RTD: Pt100 (3-wire/4-wire), Cu50 (2-wire/3-wire)
Measurement Accuracy: ±0.02% FS (current/voltage); ±0.1% FS (thermocouple/RTD)
Resolution: 24-bit ADC
Sampling Rate: 100 Hz per channel (configurable up to 500 Hz)
Isolation Level: Channel-to-channel, channel-to-power (2500 VAC, 1 minute)
EMC Compliance: IEC 61000-6-2 (ESD: ±8 kV contact, ±15 kV air; Surge: ±2 kV line-line)
Operating Environment: Temperature -40°C to +70°C; Humidity 5%–95% (non-condensing)
Power Supply: 24 VDC ±10% (Typical power consumption: ≤ 6 W)
Mounting Type: DIN rail mounting / Emerson DeltaV standard rack mounting
Dimensions: 140 mm × 85 mm × 180 mm (L × W × H)
Weight: Approximately 0.9 kg
Compatibility: Fully compatible with Emerson DeltaV DCS; Supports Modbus TCP, OPC UA, HART 7 (for smart sensor integration)
Sale!
¥ 25,999.00¥ 5,999.00
Brand: EMERSON
Model: EMERSON 5X00489G01
Product Type: Industrial digital output module (DCS/PLC-compatible)
Core Function: Converts digital control signals into discrete output signals to drive field actuators, valves, and switches
Number of Output Channels: 16 independent channels
Output Signal Type: Relay outputs (Form C: normally open/normally closed contacts)
Contact Rating: 250 VAC / 30 VDC, 5 A (resistive load)
Switching Speed: ≤ 10 ms (on/off transition time)
Isolation Level: Channel-to-channel and channel-to-power isolation (2500 VAC, 1 minute)
EMC Compliance: IEC 61000-6-2 (ESD, surge, and EFT protection)
Operating Environment: Temperature -40°C to +70°C; Humidity 5% to 95% (non-condensing)
Power Supply: 24 VDC ±10% (Typical power consumption: ≤ 12 W)
Mounting Type: DIN rail mounting / Emerson DeltaV standard rack mounting
Dimensions: 145 mm × 90 mm × 185 mm (L × W × H)
Weight: Approximately 1.2 kg
Compatibility: Fully compatible with Emerson DeltaV DCS; Supports Modbus TCP, OPC UA, and HART 7 industrial protocols
Sale!
¥ 25,999.00¥ 8,999.00
Technical Parameters
Basic Specifications
Model: ABB AI835A (Product Link: [Link to be provided by you])
Product Type: High-precision analog input module for ABB AC 800M/AC 800XA DCS
Number of Channels: 8 independent input channels (isolated between channels)
Signal Compatibility: 4–20mA DC, 0–10V DC, thermocouple (J/K/T/E/R/S/B/N), RTD (Pt100/Pt1000/Ni100)
Performance Parameters
ADC Resolution: 24 bits
Measurement Accuracy: ±0.02% of full scale (for 4–20mA signals at 25°C)
Response Time: ≤10ms (typical for current/voltage signals)
Isolation Voltage: 250V AC (channel to channel, channel to ground)
Input Impedance: ≥10MΩ (for voltage signals), ≤100Ω (for current signals)
Environmental & Physical Parameters
Operating Temperature: -20°C to +60°C
Relative Humidity: 5%–95% (non-condensing)
Power Supply: 24V DC ±10% (from ABB DCS backplane)
Power Consumption: ≤3W
Mounting: DIN rail mounting (35mm standard rail) or backplane mounting in ABB AC 800M cabinets
Dimensions (W×H×D): 35mm × 140mm × 180mm
Weight: Approximately 0.6kg
Certifications: CE, UL, CSA, IEC 61010-1
Sale!
¥ 8,999.00¥ 5,999.00
Core Product Parameters
Category
Detailed Specifications
Device Type
Universal analog input module for industrial DCS/PLC systems
Key Function
Analog signal acquisition, isolation, amplification, and digital conversion
Supported Signals
4-20mA DC, 0-10V DC, thermocouple (J/K/T/E/R/S/B), RTD (PT100/PT1000)
Number of Channels
8 independent channels, channel-to-channel isolation
Measurement Accuracy
±0.05% FS (for 4-20mA/0-10V); ±0.1℃ (for PT100 at 0-100℃)
Communication Interface
ABB AC 800M Backplane Bus, PROFINET (via optional adapter)
Power Supply
24V DC (19-32V DC wide voltage range), redundant power support
Operating Temperature
-40℃ ~ +70℃
Protection Class
IP20 (for cabinet mounting)
Mounting Type
DIN rail mounting (compatible with ABB standard cabinets)
Dimensions (L×W×H)
100mm × 160mm × 25mm
Safety Certification
IEC 61508 SIL 2, CE, UL, CSA, ATEX Zone 2
Compatibility
ABB AC 800M/Symphony Plus DCS, ABB CI854 communication module, third-party standard sensors
