Power Supply: 100-240 VAC, 50/60 Hz
Input Voltage: 24 VDC
Output Voltage: 24 VDC
Maximum Output Current: 5A
Storage Temperature: -40°C to +85°C
Operating Temperature: 0°C to +60°C (some sources mention -20°C to 60°C)
Memory: 64 MB
Input Points: 32
Output Points: 32
Model: 3HAC025097-001
Manufacturer: ABB
Voltage: 24 Volts
Power: 1.2 Watts
Environmental Temperature (Operating): -25°C to +70°C
Storage Temperature: -40°C to +85°C
Protection Level: IP201
Size: 7.4 x 3.8 x 3.2 cm
Weight: 0.65 Kilograms
Model: CSH01.1C-PB-ENS-NNN-MEM-S2-S-NN-FW
Voltage: 380V-480V AC (or other, may vary by model)
Power: 0.5kW-7.5kW (or other, may vary by model)
Current: 2.0A-18.0A (or other, may vary by model)
Speed: 0-6000 rpm (or other, may vary by model)
Position accuracy: ±0.001°
Weight: The exact weight is not given directly, but depending on similar models, it may be between 2.0kg-5.0kg
Model: DKC03.3-040-7-FW
Brand: Rexroth
Voltage Rating: 24V
Application: Used in high-precision positioning systems
Compatibility: For controlling servo motors
Voltage: 380-480 VAC
Frequency: 50/60 Hz
Power Range: 0.75-250 kW
Overload Capability: 150% for 60 seconds
Control Methods: V/F Control, Sensorless Vector Control, Flux Vector Control
Speed Measurement: Utilizes internal displacement sensors targeting gears, keyways, or teeth rotating on the shaft
Key or Phase Measurement: Includes displacement sensors with a once-per-revolution target, not just gears or teeth
Type: Safety System Controller
Safety Integrity Level: SIL 3 capable (depending on configuration)
Processors: Triple Modular Redundancy (TMR) architecture
Memory: Sufficient for storing control logic and data
Input/Output: Various modules for analog, digital, and specialized signals
Exact dimensions (length, width, height) and weight would depend on the specific model and configuration. It is recommended to refer to the official documentation or contact the supplier for precise dimensions and weight.
Input Voltage: 24VDC
Output Voltage: 24VDC
Maximum Output Current: 10A
Rated Voltage: For converters, the rated voltage is mainly single-phase 220~240V and three-phase 220V or 380~460V, with most low-voltage converters in China rated at 380V12.
Rated Frequency: Typically 50Hz or 60Hz, with China using 50Hz12.
Type: A vibration monitoring system or sensor
Measurement Range: Vibration levels typically measured in microns (µm) or millimeters per second (mm/s)
Frequency Range: The frequency range of vibrations it can detect, typically specified in Hz
Sensitivity: The ability to detect small changes in vibration levels
Exact dimensions (length, width, height) and weight are not generally provided without referencing the manufacturer’s specifications. However, it is designed for installation on or near rotating machinery.
Model: TB820V2.
Brand: ABB.
Power Supply: Dual power redundant input, DC (9-36)V, typical DC24V, with power consumption less than 4W.
Isolation and Protection: DC1500V voltage isolation and reverse polarity protection.
Dimensions: 132mm × 105mm × 52mm.
Weight: Approximately 800g (0.8kg).
Logic block limit: The maximum loop value allowed for each logic block (main program or subroutine) is 3000, and the logic is repeatedly executed by the PLC.
Programming support: Support a variety of programming languages and development tools, convenient for users to develop and debug programs.
Size: The exact size information is not given directly, but the regular size may be 430mm(D) x 220mm(W) x 130mm(H) or can be customized on request.
Maximum loop value: The maximum loop value allowed for each logical block (main program or subroutine) is 3000.
Program size and reference address limit: Depending on the CPU model used, such as Series 90-30CPU or Series 90-20 CPU, these are detailed in the corresponding installation manual.
Turbine monitoring: It can monitor various parameters of the turbine, such as temperature, pressure, speed, fuel flow, etc., to ensure the safe and effective operation of the turbine within the working range.
Display: This touch panel features a high-precision widescreen design with a screen size typically 15.4 inches, providing a clear, detailed visual experience.
Serial ports: includes COM1 RS232 and Communication 2 RS422/RS485 with standard 9-pin D sub contacts.
Dimensions: The width x height x depth of the front panel is 410 x 286 x 7 mm.
Weight: The touch panel weighs 3.85 kg.