Grid view List view

Showing 5245–5256 of 24490 results

Sale!

ABB SDCS-CON-4

¥16,529.00

Parameters and Specifications:

  • Input Voltage: 24V DC
  • Output Voltage: 24V DC
  • Maximum Output Current: 2A
  • Operating Temperature Range: -10℃~ 50℃
  • Storage Temperature Range: -40℃~ 85℃

Dimensions and Weight:

  • Dimensions: 172×127 mm (4-layer board design)
  • Weight: Not specified
Sale!

FOXBORO FBM233

¥15,248.00

Parameters:

  • Ethernet Interface: 10/100Mbps copper Ethernet
  • Field Device Interface: Supports various types of field I/O device protocols including HART, FOUNDATION Fieldbus, Modbus, etc.
  • Power: 24 VDC
  • Power Consumption: 5 W
  • Operating Temperature: -40°C to 70°C
  • Protection Level: IP66
Sale!

TRICONEX 3503E

¥18,524.00

Parameters and Specifications:

  • Input Voltage: 24VDC (typically)
  • Input Current: 1.5A
  • Output Voltage: 24VDC
  • Output Current: 2A
  • Operating Temperature Range: -40℃~70℃ (some sources mention -10~70℃ as well)
  • Storage Temperature Range: -40℃~85℃
  • Communication Interfaces: Supports Ethernet, RS-232, RS-485, USB, etc.
  • Memory Capacity: 32MB
Sale!

PROSOFT MVI56E-MNETC

¥16,452.00

Parameters and specifications:

Control platform compatibility: Specifically compatible with the ControlLogix platform.
Power consumption: 5mA at 800 VDC and 24 mA at 3 VDC.
Supported Modbus clients and servers: Up to 30 Modbus clients and 20 Modbus servers.
Data transfer rate: 10/100 Mbps.
Network Configuration and Diagnostics: 10/100 MB Ethernet port for network configuration and diagnostics with automatic cable cross detection.

Sale!

YOKOGAWA ZR22G-100-S-K-C-T-T-C-A

¥15,264.00

Parameters and Specifications:

  • Measurement Object: Combustion emission gases and mixtures (excluding corrosive gases such as ammonia)
  • Oxygen Concentration Range: 0.01～100 vol% O2
  • Output Signal: 4～20mA DC (Load Resistance: 550Ω)
  • Measurement Range: Configurable within the range of 0～5 to 0～100 vol% O2
  • HART Communication: 250～550Ω, depending on the number of field devices in the loop (multi-drop mode)
Sale!

ABB PHARPS32200000

¥16,520.00

Parameters and Specifications:

  • Input Voltage: 90-264VAC
  • Input Current: 11.5A
  • Output Voltage: 24VDC
  • Output Current: 32A
  • Power: 768W
  • Operating Temperature: -20℃~+70℃
Sale!

KOLLMORGEN S22460-SRS

¥14,259.00

Parameters & Specifications:

  • Voltage: 24V
  • Current: 100-400A
  • Power: Specific power is not directly mentioned, but it is generally related to current and voltage
  • Communication Interfaces: Supports multiple communication interfaces such as EtherCAT, CANopen, Ethernet, and serial communication
Sale!

ABB SDCS-CON-4

¥16,529.00

Parameters and Specifications:

  • Series: ABB
  • Model: SDCS-CON-4
  • Technology: A programmable logic controller (PLC) designed for DCS800 series DC speed controllers
  • Functionality: It controls the operation of speed controllers, including motor control, protection, and communication
Sale!

GE IC660ELB921H

¥16,529.00

Parameters and specifications:

Series: GE series
Model: IC660ELB921H
Operating voltage: 93 to 132 volts AC
Operating frequency: 47Hz~63Hz
CPU redundancy: Supported
Contact layout: Normally open
Application range: 110V~240V
Product Type: Relay output module

Sale!

YOKOGAWA AIP830

¥15,269.00

Parameters and specifications:

Input signal type: analog signal, digital signal, pulse signal.
Sampling rate: 1 Hz to 100 kHz.
Accuracy: ± 0.01%FS.
Reliability: MTTF > 100,000 hours.
Input voltage: 24VDC.
Output voltage: 24VDC.
Operating temperature: -10℃~ 60℃.
Storage temperature: -20℃~ 80℃.
Humidity: 10% ~ 90% (non-condensing).

Sale!

GE IC695CRU320-BB

¥16,542.00

The GE IC695CRU320 – BB is a high – performance controller module designed for industrial automation systems. It is a redundancy processor from the PACSystems RX3i product family, manufactured by GE Fanuc / Emerson Automation2.

Sale!

ProSoft PLX82-EIP-PNC

¥16,452.00

The ProSoft PLX82 – EIP – PNC is a communication gateway that connects Ethernet/IP – based controllers with PROFINET RT devices. It allows for secure, high – speed communications between two major industrial automation protocols3.