Part number: IS200VCRCH1B.
Working voltage: 220V.
Output frequency: While direct output frequency information about the IS200VCRCH1B is not provided, some GE products may support high-frequency operation, such as 350kHzHz. However, this frequency may not be directly related to the specific application of IS200VCRCH1B.
specification
Function: Discrete input/output board that controls 24 relay outputs and accepts 48 discrete inputs from four terminal boards.
Mount: Mount into the VME I/O rack, which has two sets of plugs for connecting to the terminal board.
Operating voltage: May vary depending on the specific model or configuration, but some information mentioned that the ELOP II operates at 24V, while other DCS/PLC system modules may operate at 220V.
Current: The ELOP II’s drive current is adjustable in 8 gears from 2.0A/ phase to 6.0A/ phase.
Output frequency: standard kHz.
System memory: at least 512MB.
specification
Function: ELOP II may be a programmable electronic system (PES) programming software or related hardware module for industrial automation control.
Operating environment: normal temperature.
System capability: Normal.
Size and weight
Size: 236*124mm
Power Supply: 24VAC or 24VDC, typical power consumption 15 watts, maximum power consumption 25 watts.
Current: The current range may vary according to the specific application, there is a current value of 100-400A mentioned, but it should be noted that this may be confused with other products.
Storage capacity: 2 GB of non-volatile flash.
Point capacity: Maximum support 30,720 points.
specification
Operating system: PLC system.
System function: Automatic.
System environment: normal temperature.
System capability: Powerful.
Measuring range: 2.0KN (kN)
Measurement accuracy:
Battery powered: ±0.5%
AC220V power supply: ±0.25%
Supply voltage: 24V (some information may also include other supply options, such as AC220V)
Current: 100-400A (This current range may be suitable for specific application scenarios or device models, further confirmation is required)
Processor:
The Artesyn MVME7100 is likely to feature an MPC864xD processor with a 1.3GHz system-on-chip, dual-core e600 processor.
The MOTOROLA MVME7100 is likely to feature a 1.3GHz PowerPC 604e processor.
Memory:
DDR2 ECC memory up to 2GB.
The MOTOROLA MVME7100 may have a memory range of 1 GB to 4 GB.
Storage:
128MB NOR flash, and optional 2GB, 4GB or 8GB NAND flash.
Interface:
May include Gigabit Ethernet ports, VMEbus, RS-232, RS-485 and other communication interfaces.
USB 2.0 controller for integrating cost-effective peripherals.
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Monitoring gas: hydrogen (H2), carbon monoxide (CO), acetylene (C2H2), ethylene (C2H4), etc
specification
CPU: 32-bit RISC processor
Operating temperature: Operating temperature -20°C to +50°C, storage temperature -40°C to +70°C
Ambient humidity: 5% to 95% relative humidity (no condensation)
Input voltage:
For the DC version, the input voltage is usually 220VAC.
For other types of controllers, there may be different voltage requirements, such as 24VDC.
Output voltage:
The output voltage of the DC supply version is 0-10VDC.
Output power: 800W (DC version).
Current: 100-400A (some information mentioned, but may be specific to specific application scenarios).
specification
Working temperature:
The operating temperature of the DC power supply version is -10℃ to +45℃.
System power supply voltage range: 20 to 32V DC
Field voltage range: 18 to 32V dc
Output voltage measurement range: 0 to 32V DC
Maximum withstand voltage: -1 to 40V DC
Rated output current (continuous) : 2A per channel per power pack for a total maximum output current of 8A
Maximum capacitance: Pre-release 3.5:30-55uF
Minimum on-state load current: 50mA
For servo driver versions, the output frequency may vary according to application requirements, but generally has a high dynamic response capability.
Accuracy: For pressure sensor versions, high precision is available to ensure accurate pressure measurement results.
specification
System environment: normal temperature.
System capability: Temperature control
Operating system: PLC system
Specially designed to control the speed, position and torque of the motor.
Performance: May have high-speed, high-precision control performance to meet the needs of precision motion control.
Communication protocols: Support a variety of communication protocols, such as EtherCAT, Profinet, etc., can easily connect and communicate with other devices.
specification
Model: S72402-NANANA (may include suffix such as -NA-225).
Series: Servo drive series belonging to Kollmorgen.
Output: NA indicates that the output of the driver has a neutral line.
Support Ethernet /IP protocols, and can be converted to the Siemens S7 protocol.
DATA mapping: Use the DATA MAP section in ProSoft Configuration Builder to copy data between regions of the gateway’s internal database, copying up to 100 registers per data mapping command and configuring up to 200 separate copy commands.
Connection capability: Supports Type 3 server connections 5, Type 3 client connections (connected :2, disconnected :1), type 1 I/O connections 2, and I/O connection size 248/248.
Number of registers: Up to 10,000 16-bit registers can be used to exchange large amounts of data.
