Parameters and specifications
Brand: ABB
Model: SA9923A-E
Control principle: Other
Processing customization: No
Measuring range: 100Pa–40MPa
Accuracy: ±0.04%
Long-term drift: ±0.1%/10 years
Range ratio adjustable range: within 10 times the accuracy is lossless, up to 100:1
Temperature influence: ≤±(0.05% range +0.01% range upper limit)/28℃
One-way overload pressure: up to 40MPa
Pressure type: up to 60MPa
Parameters and specifications
Brand: General Electric
Type: Ethernet interface module
Support system: DCS control system
Communication protocol: Ethernet /IP
Working voltage: 220V
Output frequency: 350kHzHz
Enclosure protection class: IP67
Output points: 8 isolated points
Operating temperature range: -40℃~85℃
Output current range: 4~20mA
Resolution: 12 bits
Output accuracy: less than 0.25%
Parameters and specifications
Brand: Emerson
Model: 5X00497G01
Use: As a base controller or power module, possibly relevant to industrial automation systems
Series: As there is no direct mention in the search results, the specific series name cannot be determined.
Size and weight
Weight: Weight varies between search results. For example, a weight of 1kg is mentioned in [2] but not explicitly mentioned in other search results.
Parameters and specifications
Data electrical interface:
The 9-pin Sub_D jack connector is adopted, and the pin definition conforms to the protocol specification of Profibus DP.
The Profibus DP bus standard is supported and communication rates are available from 9.6kBit/s to 12MBit/s.
Rate setting Supports automatic identification or DIP switch Settings.
It has 4000V lightning protection, 1.5A overcurrent protection and 600W surge protection.
Optical fiber interface:
The optical fiber wavelength supports multi-mode 850nm and 1310nm, and single-mode 1310nm and 1550nm.
The transmission fiber types include multi-mode and single-mode, and the transmission distance varies according to the fiber type.
The optical fiber port type can be SC, FC, or ST. SC optical ports are standard.
Parameters and specifications
Communication rate: Supports a variety of communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75k kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function, industrial terminal interface.
Relay alarm output: Support link fault and power fault alarm output, contact large capacity DC48V/1 A, industrial terminal interface.
Lightning protection and protection: with 4000V lightning protection and 1.5A overcurrent protection and 600W surge protection.
Installation method: Standard industrial 35mm guide rail installation method.
Parameters and specifications
Function: The Woodward 8440-1713D servo drive module is a servo drive module for industrial control systems, typically used to control and manage the motion and position of an electric motor, servo motor or actuator.
Control mode: May support a variety of control modes, such as position control, speed control, torque control, etc., to meet the needs of different application scenarios.
Communication interface: The module usually has a variety of communication interfaces in order to communicate with other control systems, PLC (programmable logic controller) or host computer to achieve remote monitoring and control.
Encoder feedback: Support encoder feedback to monitor the position of the motor or actuator in real time and provide accurate position control.
Closed-loop control: Using a closed-loop control system, the gap between the actual position and the desired position is kept to a minimum by constantly adjusting the motor output.
Parameters and specifications
Storage space: Has 2MB of storage space.
I/O capacity: 16k bit discrete I/O and 16k word analog I/O.
Communication interface:
Ethernet ports 1-10/100.
The USB interface is a standard 2.0 interface.
One additional RS-232 interface.
Supported functions:
Ladder diagram, structured text, function block diagram and C language programming.
Automatically locate symbol variables, using any amount of user memory.
Parameters and specifications
Product name: Digital input/output module
Brand: YOKOGAWA/ Yokogawa
Model: AAI143-H53/K4A00
Product features: Standard specifications, non-imported, origin in Japan
Application scope: Supports dual redundancy
Input signal:
Contact input: Off signal 100 kΩ or more; Open signal 200 Ω or less
Voltage input: OFF signal 4.5 ~ 25v DC; ON signal ±1v DC, less than 200Ω
Output signal: transistor contact, inductive load, resistance load: 30v DC, 100ma
Parameters and specifications
Type: PROFIBUS DPV1 main station communication module.
Features:
As a PROFIBUS network scanner, transfer input and output data between PROFIBUS devices and processor data.
It is recognized as an input/output module and has access to processor memory for data transfer between the processor and the module.
Communication protocol: PROFIBUS DPV0/V1 protocol is supported and can be transmitted through Class 1 or Class 2 DPV1 services.
Processor and memory: Using high-performance processors and memory, fast data calculation and processing, to meet the needs of complex control algorithms and data processing.
Backplane current load: 800 mA@5V; 3 MA @ 24VDC.
Number of slave devices: A maximum of 125 slave stations can be connected.
Number of ports: two
