Series: ABB 800xA system basic unit controller.
Processor and memory: Using advanced processor and high-speed memory technology, the main memory chip has error detection and modification capabilities, and the PM803F improves the storage capacity of the main memory to 16MB.
Communication capability: It has 6 slots and 1 power slot, of which 2 slots use fast DMA technology to directly communicate with the CPU for high-speed data, and realizes the information transmission of the control layer based on the standard TCP/IP protocol Ethernet through the Ethernet module. The remaining four slots are used to exchange data with the CPU and main memory in interrupt mode, and the data bus bandwidth is 100MB/s.
Model : GDB021BE (may include different suffixes to indicate specific model differences)
Type : Optical fiber interface board/relay output module
features : high-speed, stable data transmission; Long-distance transmission capability; High anti-interference ability; Easy to integrate and maintain
Function and application :
function : to realize the conversion of digital signal and electrical signal, control the external equipment
Applications : industrial automation, process control, power system, equipment protection, building automation
It belongs to ABB UFC series intelligent motor control center
High performance medium voltage circuit breaker module, with analog input and output function
May integrate CNC functions to achieve high precision control
Error detection and alarm function to ensure the stable operation of the system
Weight and dimensions :
Weight : 250 kg
Dimensions : 800 x 600 x 400 mm
Processor: PPC603E processor
Clock Speed: 166 MHz
Memory: 32 MB RAM and 8 MB Flash
I/O Ports: 12 digital inputs, 8 digital outputs, 4 analog inputs, and 4 analog outputs
Communication Interfaces: 2 RS232 serial ports, 1 RS485 serial port, and 1 Ethernet interface
Processing Speed: 1.1 GHz Atom processor
Memory: 10 MB
Embedded Ethernet Interface: Supports two connections rated at 10Mb/s and 100Mb/s
Serial Ports: RS-485 and RS-232
Maximum Program Blocks: 512, with each block up to 128 KB
Protocols: Modbus RTU Slave, SNP, Serial I/O
Power Requirements: 3.3 VDC, 5 VDC, or 24 VDC
Type: ABB DSDX452 Digital I/O Module
Inputs/Outputs: 20 DI/12 DO (20 Digital Inputs and 12 Digital Outputs)
Voltage Range: Suitable for 24 V-240 V a.c./d.c.
Minimum Load on Contacts: 2.5 VA (but 100 mA for 24 VDC)
Maximum Load on Contacts (with ‘L’ Version): 200 mA
Recommended Minimum Load on Contacts: 5 mA or 0.05 VA
Dimensions and Weight:
Dimensions: 9.0″ x 4.0″ x 10.0″ (22.9 cm x 10.2 cm x 25.4 cm) or 400 x 320 x 170 mm (for the digital output module version)
Weight: 5 lbs 0.0 oz (2.3 kg) or 6.8 kg
Input Voltage: 24VDC
Input Current: 1.5A
Output Voltage: 24VDC
Output Current: 2A
Operating Temperature Range: -40℃ to 70℃12 (some sources mention -10℃ to 70℃)
Storage Temperature Range: -40℃ to 85℃
Communication Interfaces: Ethernet, RS-232, RS-485, USB
Memory Capacity: 32MB
Input Channels: 32 (8 groups)
Input Frequency Range: DC or 47.63 Hz
Recommended Input Range: 20-42.5V DC
Maximum Voltage: 42.5V AC/DC
Power Supply: Dual redundant input, DC (9-36)V, typical DC 24V, power consumption less than 4W. Features DC1500V voltage isolation and reverse connection protection
Relay Alarm Output: For fiber link failure and power failure alarm output, contact capacity: DC48V/1A
Series: abb control system
Characteristics of the vehicle:
Compatible with several control systems
Supports several communication protocols
High speed data transmission
With high reliability and stability
Size and weight:
Size (approximate) : 65 mm in length, 203 mm in height and 157 mm in width
Weight (approximate) : 0.62 kg
