argument
Product type: Analog input interface module
Input channels: 8 isolated, independent channels that support a range of analog sensor signal inputs, including 0 to 20mA DC (FBM201), 0 to 100mV DC (FBM201b), 0 to 5V DC (FBM201c), 0 to 10V DC (FBM201d)
specification
Resolution: May vary depending on the specific application scenario and configuration, but generally provides high accuracy
Measurement accuracy: High precision, achieved through the sigma-delta data conversion of each channel
Calibration requirements: No calibration modules and terminal components are required
dimension
Length x width x height: 10.4 cm x 4.5 cm x 11.4 cm
weight
Weight: 0.284 kg
Shipping weight: 2 kg
argument
Brand: Schneider
Voltage: 24V (3.3V plusmn in some descriptions; 9%, but this may refer to the voltage of other related devices or modules)
Current: 100-400A (this may refer to the current range of a certain device associated with the 140CPU31110)
Maximum current consumption: 2.4A (this may refer to the current consumption of the interface card associated with 140CPU31110)
Weight: In different descriptions, there are 2KG and 1KG, the specific may vary by product version or configuration
Packing: good
Delivery time: Stock
Working environment temperature: -40 to 100℃
specification
Device name: 140CPU31110
argument
Processor: Intel Atom dual-core D2550 low power processor, 1.86GHZ
Chipset: Intel D2550+NM10
Memory: 2 x 204Pin DDR3
Hard disk: Support SATA 2.5″ hard disk, SATA, mSATA SSD
Display: Integrated Intel GMA 3600 chip, shared video memory up to 640MB
Network: Two Intel RTL8111E Gigabit Ethernet ports
Audio: Realtek ALC662 6-channel hi-fi audio controller
Power input: Wide voltage 6~30V
Input signal: Support a variety of input signals, including 24V AC/DC digital input, analog input, etc.
Input channels: Each input signal is processed by three independent channels, which ensures that even if one channel fails, the other two channels continue to work.
Recommended input range: For digital inputs, the recommended range is 20-42.5 volts DC.
Maximum voltage: 42.5 volts AC/DC.
specification
Size: Depending on the search results, there are different size descriptions such as 263337 mm and 21 cm (possibly length)
argument
Model: HIEE300900R0001
Brand: ABB
Operating voltage:
In some descriptions it is 220V
In another description it is 24VDC
Output frequency: 50HZ
Output voltage range: 5VDC
Output current:
Max. 10A
Rated current 5A
Efficiency: greater than 90%
Operating temperature:
-20°C to +50°C
-40℃ to 85℃
Storage temperature:
Number of clients: Up to 30 Modbus clients are supported
Number of Modbus servers: Up to 20 Modbus servers are supported
Communication rate: 10/100 Mbps transmission rate is supported
Power requirements:
The available 5VDC power consumption is 800mA
The power consumption of available 24VDC power supply is 3mA
specification
Compatibility: Especially compatible with Rockwell Automation’s ControlLogix platform
Occupied slot: Occupies a single slot in the ControlLogix chassis
Configuration tool: ProSoft Configuration Builder (PCB) is required to input the configuration of the module
Version requirements: Version 16 or later if used with additional instructions (AOI/AOC); To use with the provided example ladder diagram program, version 15 or later is required
specification
Model: M9494F1003
Size:
Product size: 166mm x 112mm x 36mm
Size mentioned at maximum output current (may be incorrect, should be a different specification or package size) : 3.94 x 7.28 x 4.13 inches (100 x 185 x 105 mm)
Weight: 1.3 kg
Case material: aluminum or stainless steel
specification
Product net weight: Depending on the search results, there are 1.8kg mentioned, there are also about 120g mentioned. This may be due to the existence of different models or configurations.
Product depth: 217 mm.
Product height: 344 mm.
Net length: 217 mm.
Product width: 132 mm.
