IS200EACFG1B
¥5,262.00Parameters and specifications:
Brand: GE/ General Electric
Model: IS200EACFG1B
Control principle: Other
Processing customization: No
Use: Automatic control
Range: 100-210
Accuracy: 0.1-0.10
Size: 110*210mm
IS200DSPXH1D
¥5,690.00Parameters and specifications:
Control principle: The use of linear positioning unit, compact organization, good rigidity, easy maintenance.
Operation mode: servo motor drive, fast running speed, stable, high positioning accuracy.
Range: 120-210.
Accuracy: 0.3-0.10.
Size: 140*210mm or 150 mm x 44 mm x 130 mm
Series:
The IS200DSPXH1D is part of GE’s family of industrial automation and control products.
S20360-SRS
¥5,784.00Parameters and specifications:
Rated current: Continuous current up to 36 amps, peak current up to 72 amps.
Rated voltage: 400 VDC.
Operating temperature: -20°C to 70°C.
Size and weight:
Dimensions: 270mm x 140mm x 70mm (L x W x H), or alternatively 2.0 inches x 7.0 inches x 5.0 inches (5.1 cm x 17.8 cm x 12.7 cm).
Weight: 3.5 kg, or another way of saying it is 1 pound 16.0 ounces (0.9kg).
IC695PBM300
¥3,625.00Parameters and specifications:
Communication capability: The IC695PBM300 is a Profibus DP master module designed to communicate with up to 125 DP slave stations.
Data transfer: Supports data transfer sizes of 244 bytes input and 244 bytes output per device, and supports up to 3.584 bytes input data and 3.584 bytes output data.
Data rate: All standard data rates are supported, including 9.6 kBit/s, 19.2 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, and 12 MBit/s.
Series:
The IC695PBM300 is part of Emerson Automation’s PACSystems RX3i Programmable Automation controller (PAC) family.
CI854A
¥1,623.00Parameters and specifications:
Control Principle: CI854A is a programmable application development module with high reliability and high stability.
Communication interface: CI854A interacts as a PROFIBUS host and builds a PROFIBUS network using RS485 technology.
Connectivity: An 800M controller can connect up to 12 CI854A modules, and each interface works as a single PROFIBUS that can be configured with its own transfer rate.
Supported transmission rates: 9.6 kbit/s to 12000 kbit/s, but not 31.25 and 45.45 kbit/s. The default transmission rate is 1.5 Mbit/s.
Output waveform: The output current is a standard sine wave, small burr, better than the power system requirements of the index standard, ripple coefficient is less than 0.3%.
Measurement accuracy: The actual measurement accuracy is about 0.3, higher than 0.5.
1C31169G02
¥3,210.00Parameters and specifications:
The controller provides automatic conversion control and protection for two low voltage inlet lines.
Suitable for multiple types of frame circuit breakers.
The controller is directly connected to the circuit breaker by a secondary wire without an adapter.
The power supply mode can be set to one, two, or none.
Size and weight:
Specific values for size and weight vary depending on the search results. Some search results mention a weight of 0.3 pounds, while others mention a weight of 1kg and 0.2kg. As for the size, there are search results that mention its external size of 10cm, and there are also mentions of size 23cm.
PXI-8252
¥5,418.00Parameters and specifications:
The PXI-8252 is a PXI-bus compatible device commonly used in industrial automation and test systems.
It may have specific parameters such as the number of analog input channels, maximum sampling rate, analog input resolution, and analog input voltage range. For example, some models of the PXI-8252 may have 4 analog input channels with a maximum sampling rate of 80 MS/s, analog input resolution of 12 bits, and analog input voltage range of ±5V.
Series:
Pxi-8252 belongs to the PXI family and is a common interface bus standard in the field of industrial automation and testing.
V18345-1010521001
¥4,629.00Parameters and specifications:
Travel range: straight travel is 20~150mm, rotation type can reach 125 degrees.
Air capacity: ≥13.5kg/ hour.
Gas consumption: ≤0.03kg/ hour.
Temperature range: -40°C to +85°C.
Vibration resistance: up to 10g, 10~150Hz.
Communication interface: Support HART or Profibus/FF communication interface to achieve real-time contact between the site and the control room.
FCM2F2 P0914YZ
¥6,254.00Parameters and specifications:
The FCM2F2 P0914YZ is FOXBORO’s device for extending fieldbus networks, increasing the number of nodes and coverage of the bus to accommodate the needs of more complex industrial automation systems.
It may support a variety of fieldbus protocols, such as PROFIBUS, Modbus, etc., and can be easily integrated into existing automation systems to achieve seamless communication with other devices.
High-speed communication technology ensures the speed and accuracy of data transmission on the bus, and meets the real-time requirements of industrial automation system.
FBM216B P0927AJ
¥4,152.00Parameters and specifications:
Power module: If it is a power module, the FBM216B P0927AJ has high performance, high stability, supports hot swap, and usually has power status indication and overload protection. In addition, it can also realize the input and output of digital signals, and supports a variety of input/output types, including switching input, fixed voltage output, fixed current output, etc.
Controller module: If it is a controller module, the FBM216B P0927AJ may be used for signal acquisition, signal processing, data communication, fault diagnosis and alarm, and control logic.
Operating voltage: For power modules, the power supply voltage is 24VDC.
Operating temperature range: -20℃ ~ 70℃.
V18345-1010521001
¥4,120.00Parameters and specifications:
The V18345-1010521001 is a smart valve positioner from ABB.
It has a large travel range, the straight stroke is 20~150mm, and the rotation type can reach 125 degrees.
Gas capacity ≥13.5kg/ hour, gas consumption ≤0.03kg/ hour.
The positioner has temperature and position compensation and uses sensor technology.
Vibration resistance up to 10g, frequency range 10~150Hz, temperature range -40~+85°C.
The debugging process can be simplified by automatic zero/range adjustment.
HART or Profibus/FF communication interface is supported for real-time contact between the field and the control room.
SGMG-44A2AB
¥3,265.00Parameters and specifications:
Make/Model: YASKAWA Electric /SGMG-44A2AB
Operating voltage: AC220V or DC24V
Output frequency: 50Hz
Scope of application: mechanical equipment
Warranty: Usually 1 year