Parameters and specifications
Type:
High bandwidth Matrix Switch Module (PXI series products)
Gas turbine card module (for monitoring, protecting and controlling the operating status and performance of gas turbines)
Inverter (converts DC energy into constant frequency constant voltage or frequency-regulated voltage alternating current)
Advant 800A series thyristor modules
Dc power module controller (used to control and manage the output voltage and current of the DC power module)
Technical features:
High bandwidth and high density: Support high bandwidth signal transmission to meet the needs of fast signal routing; With high density switching channels
Multi-channel matrix configuration: Provides multiple matrix configuration options to support flexible channel switching and connection
Low insertion loss and high isolation: Ensure the accuracy and reliability of signal transmission
Electrical parameters:
Rated current: 150A
Rated voltage: 1200V
Parameters and specifications
Electrical connection/Component type: 2 Connector with redundant cable /RIO head-tail adapter module
I/O words/drop: 64I/64O
Diagnostic start: LAN controller check; Memory check; Power on
Power consumption: 3W
Required bus current: 750mA
Number of channels: 2 channels
Size and weight
Weight: According to the search results [1], a product is listed as weighing 2KG
Parameters and specifications
Model: AAI143-S00
Brand: YOKOGAWA (Yokogawa)
Application fields: chemical, petroleum, electronics, aerospace, electrical, etc
Input range: May be related to analog signals, but the specific range is not explicitly given in the search results
Number of channels: 16 channels are mentioned in the search results (e.g. for analog inputs or millivolt inputs)
Isolation: Has an isolation function to protect the circuit and signal
Size and weight
Size: The exact size is not explicitly given in the search results, but it is mentioned that the overall size may be 111mm
Weight: 2kg
Parameters and specifications
Input: 16 groups isolated independent channels
Input range (per channel) : 0 to 20.4 mA dc (current limited to 33 mA per channel)
Communication: Communication with its associated FCM or FCP via a redundant 2 Mbps module fieldbus
Input voltage range (redundancy) : 24V DC +5%, -10%
Power consumption:
7 watts at 24 volts DC (good value or maximum)
11 watts at 24 volts DC (good value or maximum), 20.4 MA for all inputs (internal power)
Size and weight
Dimensions (HxWxD) : Approximately 10.2 cm x 11.4 cm (including mounting lugs) x 4.5 cm x 10.4 cm
Shipping weight: about 2 kg
Parameters and specifications
Working voltage: 24VDC
Operating temperature: -40℃ to 70℃
Operating humidity: 5% to 95%
Communication speed: 100Mbps
Communication protocol: Ethernet /IP
Supported chip: FPGA
Product specifications: Size 125mm x 72mm x 138mm, weight 0.5kg
Case material: metal
Mounting method: DIN rail mounting
Applicable model: RX3i controller
Size and weight
Dimensions: 125mm x 72mm x 138mm
Parameters and specifications
Brand: GE Fanuc (or GE General Electric)
Model: IC695CMM004
Communication protocol: Supports Modbus, DNP3 and other protocols
Serial ports: Provides 8 separate and isolated serial ports (note: different from the 4 ports mentioned in the first search result, but may be a later version or newer description)
Baud rate: from 1200 to 115.2 thousand baud
Power requirements: 0.7 amps at 3.3 volts DC, 0.15 amps at 5 volts DC
Maximum overvoltage rating: +/-25 volts
Minimum inter-channel crosstalk: -55 dB
Isolation of ports from the backplane: 250 V AC continuous
Port to port isolation: 500 V DC continuously and 710 V DC for up to 1 minute
Operating temperature range: 0 to 60 degrees Celsius
Parameters and specifications
Brand: Rexroth
Operating voltage: standard VV
Output frequency: standard kHz
Product certification: compliance with standards
Series: Modules
Bom number: 203698856
trait
Surge protection device: Installed inside the RS485 terminal to protect the device from damage caused by surge current.
Optically coupled data interface: Use an isolated power supply with an optically coupled data interface to prevent noise coupling.
Daisy chain connection: To ensure that all devices in the Daisy chain have the same potential, the common terminals of each RS485 port must be connected together.
Parameters and specifications
Brand: Westinghouse/ Westinghouse
Model: 5X00121G01
Control principle: Other
Processing customization: No
Application: Automation PLC
Range: Not specifically mentioned
Accuracy: Not specifically mentioned
Size: 5X00121G01mm
Operating temperature: 0–60℃
Parameters and specifications
Brand: Schneider
Model: 140CRA93200
Bus current requirement: 750 mA
Typical power consumption: 3 W (3.8W is also mentioned)
Supported series: Quantum 200 Series, 500 Series, 800 Series or SY/MAX (any combination)
I/O count: 64 in words/drop, 64 out words/drop
Number of branches: With 31 branches, up to 32 ports (16 branches)
Transmission rate: 1544 Mbit/s
Isolation voltage: 500 V DC
Dynamic range: 35 dB
Coaxial cable type: 75 Ohm
Operating temperature range: 0… 60 °C
Parameters and specifications
Brand: ABB
Model: 3BDZ000398R1
Operating voltage: Possible 220V
Output frequency: e.g. 30kHz
Control principle: involves other technologies
Interface: Support USB and PS/2 interface, equipped with 15-pin Mini connector (3-in-1) and a 4-pin standard USB male head (shared by keyboard and mouse)
Supported operating systems: Windows9×/2k/xp, NT, UNIX, LINUX, NOVELL, DOS, etc
series
Series: ABB industrial control spare parts
Parameters and specifications
Brand: Foxboro
Model: FBM216B P0927AJ
Working voltage: 24VDC
Size: 140mm x 80mm x 60mm
Weight: 0.5kg
Operating temperature range: -20℃ ~ 70℃
trait
High stability: Provides a stable power supply for the Foxboro system to ensure the normal operation of all modules and devices in the system.
