EPRO MMS6312
¥16,528.00The EPRO MMS6312 is a dual – channel shaft displacement monitor1. It is mainly used to monitor the axial displacement and vibration of mechanical equipment, such as the cylinder expansion displacement of steam turbines
ABB DSQC604
¥16,548.00The ABB DSQC604 is a digital I/O board designed for ABB robots2. It serves to provide reliable and flexible input/output signals for a variety of applications2. This module is crucial in industrial automation systems, facilitating seamless communication between the robot controller and peripheral devices.
HIMA F3236
¥16,529.00The HIMA F3236 is a 16 – channel digital input module designed for safety – related applications2. It is mainly used to process and monitor digital input signals in industrial systems2. The module has the advantages of high accuracy, wide compatibility and flexible configuration
FOXBORO FBM216B
¥16,529.00The FOXBORO FBM216B is a HART communication redundant input interface module designed for various industrial applications1. It plays a crucial role in integrating HART communication into industrial control systems, providing reliable and accurate input signal measurements
YASKAWA HW1382522-A
¥16,529.00The YASKAWA HW1382522-A is a high-performance industrial control module designed for a wide range of automation applications. This module serves as a crucial component in industrial control systems, enabling precise control and monitoring of various processes.
ABB BCU-02
¥16,529.00Brand: ABB
Model: BCU-02
Control principle: Other
Specification Size: BCU-02mm (may refer to a specific size or type identifier)
Dimensions: Height x width x thickness (mm) 76x152x250
Installation type: screen mounted
Display accuracy: opening 1cm
Output contact, signal: upper limit, lower limit (the setting value of two preset points can be arbitrarily set in the full range)
Relay contact capacity: AC220V/3A, DC125V/3A
METSO IOP302
¥16,425.00The METSO IOP302 is a high – performance analog input module designed for industrial automation control systems. It can simulate various input signals such as voltage, current, and temperature
ABB CI856K01
¥16,529.00- Product Type: S100 I/O Interface
- Transmission Speed: 10 Mbit/s
- Max Units on CEX Bus: 12
- Connector: Miniribbon (36-pin)
- 24V Consumption Typ.: 120 mA
- Operating Temperature: 55 °C
- Protection Class: IP20 according to EN60529, IEC 529
GE M2LR-00-000-0
¥18,524.00- Brand: GE (General Electric)
- Model: M2LR-00-000-0
- Type: Online Dew Point Transmitter
- Measurement Range: -110°C to +20°C
- Measurement Accuracy: ±2°C (-65°C to +20°C), ±3°C (-110°C to -66°C)
- Measurement Object: Gas
- Temperature Range: -40°C to +60°C
- Output: 4~20mA
ABB 3BHB006309R0001
¥15,268.00- Technical Indicators:
- When the generator’s excitation voltage and current do not exceed 1.1 times the rated excitation voltage and current, the excitation system operates continuously
- The excitation system’s peak voltage ratio is ≥ 1.6~1.8 (2.0)
- The excitation system’s allowable forced excitation time is ≥ 10s
- Voltage adjustment range: 70~110%
- Voltage adjustment accuracy: ≤± 0.5% (0.25%)
- Voltage regulation range: ±10% (15%)
- Forced cut-off rate of the excitation system: ≤ 0.1%
TRICONEX 3604E
¥15,269.00- Operating Voltage: 24VDC
- Operating Temperature: -20℃ ~ 60℃
- Storage Temperature: -40℃ ~ 85℃
- Communication Interfaces: Modbus, Ethernet
- Power Consumption: Max 10W
- Input Signals: Digital Input, Analog Input, Pulse Input
- Output Signals: Digital Output, Analog Output, Pulse Output
HIMA F6217
¥15,284.00The HIMA F6217 is an 8 – channel analog input module designed for industrial automation systems2. It interfaces seamlessly with a wide range of analog sensors and transmitters, effectively converting input signals such as current or voltage into digital data for further processing within the HIMA safety controller.