There are also references to 24Vdc/120Vac, but may refer to different applications or configurations.
Maximum current:
12A (according to some descriptions)
There are other accounts that mention 100-400A, but this may be an error or confusing information, as this does not match the other descriptions of 1TGE120028R0010.
Communication interface: RS232/RS485/CAN bus network function (CAN bus is an option)
Other specifications:
The upper computer is set up to operate and control the drive through the I/O port
Parameters and specifications
Control power supply: rated 24-60 VDC, 20-48 VAC@ 48-62 Hz.
Analog output: Provides 4-20 mah analog output.
Communication ports: Three separate ports are available, including an RS232 port (for programming setup, firmware upgrade, and local control), a computer RS485 port (which can be connected to a PLC, DCS, or PC-based user), and a secondary port, RS458 (for simultaneous query or redundancy from another PLC, DCS, or PC software).
Size and weight
Package size: When shipped, the relay package is 12 inches wide, 11 inches high, and 10 inches deep.
Weight: The weight given by different sources varies and may vary depending on packaging and accessories. Some data show that the weight is about 1.2kg, and some data mention that the weight is 3.76kg.
Power consumption: Maximum 8.5W per non-fault-tolerant module
Operating temperature: 0 to +60 degrees Celsius (+32 to +140 degrees Fahrenheit)
Configuration: Single-processor module, fault-tolerant by two processor modules, the substrate integrated into an interconnect fault-tolerant connector
Processor: Possible Microprocessor based AMD Elan 520 100MHz, I/O processor CommControl™ ASIC
Size and weight
Dimensions: Length 14.7cm x width 5.15cm x height 11.4cm
Weight: 0.6 kg (product itself), shipping weight 1.5 kg
Communication interface: Support Ethernet, serial port, Modbus and other common communication protocols and interfaces
System support: Can be used with other DCS system components
Operating temperature: -40°C to +70°C (the operating temperature range of the TRICONEX 3009 series can be used as a reference)
Input voltage: It may vary depending on the model and configuration, but the standard voltage range is generally applicable to industrial automation and process control systems
Rated current: According to the search results, there are different descriptions, there are mentions of 2A, there are mentions of 100-400A, the specific may vary by different application scenarios or configurations.
Parameters and specifications
Operating range: -40°F to +140°F (manufacturer’s temperature range)
Input range: 110 to 250 VDC (operating voltage range)
Control power: 24-60VDC
Rated voltage: 120 V AC (rated voltage under certain conditions)
Frequency: 47-63 Hz
Power consumption: 6 W (power consumption under certain conditions)
Size and weight
Size: Depending on the search results, there are different size descriptions. One description is that the package size is 12 inches wide, 11 inches high, and 10 inches deep; Another description is that the size is 23cm (this may refer to the length of a certain dimension, but the overall size information is not complete). Another description mentions a size of 123,232, but the unit is unclear (it could be centimeters or something else).
Weight: Depending on the search results, there are different weight descriptions. One description is that the package weighed about 17 pounds; Another description says it weighs 0.2kg, and another says it weighs 0.28 kg.
