Grid view List view

Showing 14701–14712 of 19874 results

HITACHI LYA010A

¥3,652.00
Parameters and specifications:
Model: LYA010A
Brand: HITACHI
Measurement accuracy: The measurement accuracy is 100, but the specific measurement accuracy unit is not clear
Measuring Range: Depending on the search results, the LYA010A is an isolated analog input board with an input voltage of 0 to 5VDC, but other voltage ranges such as 40-220VAC 50/60HZ are also possible
Input points: 16 points voltage input
Insulation voltage: 500VAC 1 min
Interface: Has a variety of interfaces, including input and output interfaces, can be connected to industrial field control or detection components and executive components
Function operation: After each analog input signal is filtered and amplified, it is converted into A digital signal by A/D converter. A/D conversion is performed sequentially from 0 channel to 15 channel. After conversion, the digital signal is selected by the multiplexer and stored in the corresponding address assigned by the template

FOXBORO FBMSVH

¥5,021.00
Parameters and specifications:
Input range: 0 to 4000 psi.
Output range: 4 to 20 mA DC.
Power supply: 12v DC to 45v DC.
Accuracy: ±0.1% of the range.
Operating temperature: -40 to 85°C (-40 to 185°F).
Product specifications: Stainless steel, process connection is 1/2 inch NPT, electrical connection is 1/2 inch NPT conduit.
Size and weight:
Weight: Approximately 1.4 kg (3.1 lb).

ABB REF601

¥4,251.00
Parameters and specifications:
Model: REF601 (such as REF601 CE446BB1NH).
Rated voltage: 1 kV to 36 kV.
Rated current: 1 A to 6000 A.
Protection function: including over current protection, overload protection, short circuit protection, ground protection, differential protection, distance protection, etc.
Measuring function: voltage, current, power, electric energy, etc.
Control function: circuit breaker control, reclosing control, load control, etc.
Communication interface: Supports RS-232, RS-485, Ethernet, etc., and supports MODBUS RTU and IEC 60870-5-103 communication protocols.
Operating temperature range: -40°C to 85°C.
Storage temperature range: -55°C to 125°C.
Humidity: 5% to 95% (non-condensing).
Protection class: IP65.

GE IC693CPU374

¥6,235.00
Parameters and specifications:
Manufacturer: GE Fanuc
CPU Type: single-slot CPU module with embedded Ethernet interface
Processor speed: 133 MHz
Processor type: Embedded 586
Typical scan rate: 0.15 ms per 1K logic (Boolean contacts)
Storage type: RAM and Flash
** User Memory (total)** : 240KB
Protocol support: SNP and SNPX on the power RS-485 port, built-in Ethernet communication support SRTP and Ethernet Global Data (EGD)
Number of Ethernet ports: two, 10/100baseT/TX ports with automatic sensing
Number of IP addresses: one
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Storage temperature: -40 ℃ to +85 ℃
Institutional certification: UL508, C-UL(Level 1, Zone 2,A,B,C,D), CE mark
Product line: GE Series 90-30 Series Programmable Logic Controller (PLC)

ABB DSMB-01C 3AFE64691929

¥3,026.00
Parameters and specifications:
Input voltage: 200 V AC to 240 V AC.
Output voltage: 24VDC.
Output current: 2 A.
Power: 48 W.
Operating temperature: -20°C to +60°C.
Storage temperature: -40°C to +85°C.
Enclosure protection class: IP20.
Size and weight:
Dimensions: 40 mm x 25 mm x 12 mm.
Weight: 50g

MOTOROLA MVME162PA-344E

¥4,211.00
Parameters and specifications:
Processor: PowerPC processor.
Memory and storage: Has expandable memory capacity and storage capacity to preset.
Interface: Supports a variety of communication protocols, such as Ethernet, USB interface, etc., and has multiple serial ports and bus interfaces.
Floating point coprocessor: The MVME162PA-344E microprocessor has a floating point coprocessor.
DRAM and SRAM: With 1MB, 4MB or 8MB parity protected DRAM and 512KB SRAM (with spare battery).
Clock: Has a TOD clock (with spare battery).
Bus interface: Optional SCSI bus interface with DMA and VMEbus interface.

MOTOROLA MVME2101-1

¥6,021.00
Parameters and specifications:
Processor: 68020 CPU, running at 25 MHz.
Memory: Onboard 512 KB RAM.
Interface: Has two serial ports and one SCSI port, as well as two VME bus expansion slots.
Supported operating systems: VxWorks, µC/OS-II, and Linux.

BACHMANN MPC270

¥6,201.00
Parameters and specifications:
Working voltage: 24V
Output frequency: There are different values in different search results, such as 50kHz, 450, but please note that this may vary by specific application or model.
Product certification: CE certification
Brand: Bachmann
Model: MPC270
Product alias: CPU module
Specifications: Sizes may vary by model and supplier. For example, some information indicates that its specification is 11×5.5x12cm, while others, such as the specification provided by the Zhangzhou branch of Xiamen Xiongba E-commerce Co., Ltd. is 242625.
Weight: Again, weight may vary by model and supplier. For example, the weight provided by Xiamen Amichang Technology Co., Ltd. is 0.66kg, while the weight provided by Xiamen Xiongba E-commerce Co., LTD. Zhangzhou Branch is 0.56kg.

BENTLY 3500/42M

¥5,622.00

Parameters and Specifications:

  • Type: Vibration Sensor
  • Frequency Range: Typically specified in the technical data sheet or manual, but common ranges for this type of sensor are 10 Hz to 1 kHz or more.
  • Sensitivity: Measured in mV/g or mV/m/s²; specific value depends on the model and application.
  • Operating Temperature Range: Specified in the technical data sheet or manual.

ProSoft MVI69-MCM

¥6,205.00

Parameters and Specifications:

  • Communication: Modbus Master/Slave1
  • Compatibility: Allen-Bradley ControlLogix1
  • Memory: 512KB RAM, 512KB Flash Memory1
  • Operating Temperature: -40°C to 85°C12
  • Power Consumption: 800mA @ 5V DC1

EMERSON A6120

¥6,145.00

Parameters and Specifications:

  • Monitoring Type: Shell Seismic Vibration Monitor12
  • Application Range: Steam, Gas, Compressors, and Water Turbines12
  • Measurement Range:
    • Vrms (Metric): 5 – 100 mm/s (±25 to ±500 micrometers)
    • Vrms (Inch): 0.197 inch/s to 3.937 inch/s (±0.984 mils to ±19.685 mils)2
  • Frequency Range: 10 – 1000 Hz (VDI 2056, DIN 4566, ISO 3945), with optional ranges2
  • Input Voltage Range: -5 – +15 VDC2
  • Input Resistance: >100 kΩ2
  • Sensor Compatibility: Works with electromechanical sensors 9266, 9267, or 9268

NI PXI-7344

¥6,205.00
Parameters and specifications:
Number of control axes: Supports motion control of up to four separate or coordinated axes.
Output frequency: The output frequency can reach 50kHz.
Motion control features: Includes stepper and servo motor control for PCI, PXI and 1394 bus computers.
Feedback system: Position and speed feedback using orthogonal encoders or analog inputs.
Command output: Analog command output is provided in the industry standard range of ±10 V.