This product belongs to the S-093H series of ABB company, the specific model is 3BHB030478R0009, is a marginal rectifier unit phase module.
Features :
Technology integration : The module integrates the high-speed switching characteristics of IGCT (insulated gate bipolar transistor) and the high blocking voltage and low on-loss characteristics of GTO (gate turn-off product gate) to realize high-efficiency marginal rectifier.
signal transmission : the trigger signal is transmitted through optical fiber, which ensures the stability and accuracy of signal transmission and improves the reliability of the system.
This product belongs to ABB’s high voltage frequency conversion phase module series, the specific model is S-113N (or may be S-113H, because there is a similar model S-113H-3BHB018008R0003, and similar characteristics) 3BHB018008R0001.
Features :
high voltage withstand : with high voltage, high current withstand capacity, suitable for high voltage system.
phase control : can control the phase of AC, to achieve the optimal utilization of electric energy.
Model & Brand: ABB DSQC633A, with ordering code 3HAC031851-001.
Functionality: Serves as a serial measurement board, likely used for data transmission and monitoring within the automation system.
Compatibility: Compatible with ABB’s industrial robots and automation systems, allowing for seamless integration and control.
Dimensions and Weight:
Dimensions: The exact dimensions of the module are not mentioned in the available information. It is advisable to refer to the product manual or contact the supplier for accurate measurements.
Weight: The weight of the module is approximately 0.5 kilograms (gross weight), making it suitable for various installation configurations.
Model & Brand: ABB PM825, with Order Code 3BSE010796R1.
Power Supply: Typically, it supports dual power redundant input with a voltage range of DC10V-36V, with a typical value of DC24V.
Communication Rates: The controller supports communication rates of 156K, 625K, 2.5M, 5M, and 10MBit/s with adaptive signal delay of 100ns.
Electrical Interfaces: Features 5PIN wiring terminals with electrical protection such as 1500W lightning surge protection, 15KV electrostatic protection, and common ground interference prevention.
Optical Interfaces: Available with multi-mode and single-mode fiber options, with a transmission distance of up to 2Km for multi-mode and 20Km for single-mode.
Dimensions and Weight:
Dimensions: Measures approximately 136mm x 105mm x 52mm.
Weight: Has a net weight of 800g.
Model & Brand: ABB PM511V08, with Order Code 3BSE011180R1.
Processor: It incorporates a processor that handles data processing and control functions within the automation system.
Memory: The module features 8 MB of dynamic RAM with ECC (Error-Correcting Code) for enhanced data integrity.
Communication Interface: It supports various communication protocols, enabling seamless integration with other components and systems.
Dimensions and Weight:
Dimensions: The module measures approximately 23.4cm (length) x 1.8cm (height) x 10.8cm (width).
Weight: It has a net weight of 0.2 kilograms. Please note that the shipping weight might be different, often heavier due to packaging.
Measurement Principle: Utilizes capacitive electrodes and thermal conductivity sensors for measuring moisture and hydrogen concentration in oil.
Measurement Range: Moisture (0-10,000 ppm) and Hydrogen (0-10,000 ppm).
Accuracy: ±10% or ±25 ppm.
Specifications:
Communication Interface: Supports RS485, RS232, and MODBUS.
Working Temperature Range: -40°C to 85°C.
Storage Temperature Range: -40°C to 85°C.
Humidity Range: 0-95% relative humidity (non-condensing).
Output Signal: Can be configured as 4-20 mA or MODBUS RS485.
Data Storage: Up to 10 years of historical data can be stored.
Channels: TRICONEX 3721 typically has multiple analog input channels, allowing for the connection of multiple sensors or measurement points.
Signal Type: Supports analog signals such as analog voltage (0-10V) and analog current (4-20mA).
Specifications:
Resolution: High resolution for accurate data acquisition and monitoring.
Data Processing: The module is equipped with data processing capabilities, including data filtering, averaging, and other processing operations.
Features:
Multi-Channel Input: Supports multiple analog input channels for connecting various sensors and measurement points.
Signal Support: Accepts a wide range of analog signal types, such as analog voltage and current, compatible with different sensors and measurement systems.
Input Power: Nominal 24V DC, with a working range of 18-30V DC.
Specifications:
Weight: 2.2 pounds (approximately 1 kilogram).
Operating Temperature: -40℃ to +70℃.
Storage Temperature: -40℃ to +85℃.
Humidity: 5% to 95%RH, non-condensing.
Dimensions:
Exact dimensions may vary depending on the specific model or configuration. However, typical industrial components often have standard sizes for easy integration into systems.
Channels: ABB TP854 typically has 2 channels.
Signal Range: Supports 4 to 20mA current signal.
Response Time: The module has a response time of 10 microseconds.
Accuracy: Provides 0.1% accuracy.
Operating Temperature: Operates within a temperature range of -20℃ to 70℃.
Dimensions and Weight:
Dimensions: Measures 120 mm x 100 mm x 40 mm.
Weight: Has a weight of approximately 0.2 kilograms.
