Model : SCXI-1104C
brand : NI (National Instruments)
Number of channels : Usually has multiple channels, which may vary from version to version, such as 32 differential analog input channels
resolution : high precision data acquisition, such as 24-bit analog-to-digital converters, some information indicates 12-bit 3, depending on the product model and configuration.
sampling rate : The maximum sampling rate is 100 kS/s, but the specific rate may vary according to application requirements
Input voltage range : ±10 V, suitable for many common signal types and voltage standards
communication protocol : Supports communication protocols such as Ethernet and IP
model : 5X00301G01, usually belongs to analog expansion module or basic bus module, depending on the application scenario.
measuring range : Support a variety of measuring ranges, such as 0 ~ 16, 20, 25, 30, 35, 45, 60, 80, 100, 120, 150MPa, etc., suitable for different pressure measurement requirements.
accuracy : high precision, such as ±0.1%, ±0.25%, ±0.5%FS, to ensure the measurement accuracy.
working voltage : Usually 5 ~ 15V DC, it is also mentioned that the working voltage is 380V or 24V, the specific need to be confirmed according to the actual product model.
output : analog output, such as 1.5~1.8mv/v, suitable for connection with PLC and other control systems.
Model : 8V10901.001-2
brand : B&R
Supply voltage range : 400 to 480 VAC
Maximum output frequency : 600 Hz
Dustproof and waterproof rating : IP20
Maximum current : 24 A
weight : about 4.4 kg
Operating temperature : up to 55 degrees Celsius
protection : has overload protection
Model: BENTLY 1900/65A-00-00-01-000
Input type: Support accelerometer, speed sensor or proximity sensor and other types of sensor input
Temperature input: Support E, J, K and T thermocouples and 2 – or 3-wire RTDS
Output: Provides six relay outputs, four 4-20mA logger outputs, and a dedicated buffer output
Communication interface: Support Modbus communication protocol, can communicate with other systems through Ethernet or RS232/485 serial port
brand : YASKAWA.
Input voltage : 200 to 230 VAC
Output voltage : 200 to 230 VAC
Rated capacity : 1 kVA
control mode : V/f control, open loop vector control, closed loop vector control
Frequency setting range : 0.01 to 600 Hz
overload capacity : 150% rated current for 60 seconds, 200% rated current for 3 seconds
Dimensions : 130 x 260 x 240 mm.
weight : 7.5 kg
Measuring range : 1ug~100mg
titration rate : 2.1mg/min
Sensitivity : 0.1ug~100g is not more than 2%, more than 1mg converted to 0
voltage : 24V is usually mentioned, but some information indicates that the supply voltage may be 220V or 240V
Maximum output current : 15A
Operating temperature range : -25~70℃
display : 17″ SXGA TFT LCD, resolution is 1280×1024, brightness is 300cd/m2, contrast is 500:1, supporting dual display
processor : May be equipped with an Intel Pentium/Celeron M low-power processor, or MC68LC040/MC68040 microprocessor
memory : Supports 1 GB of DDR memory. Some configurations may provide 256 MB or 512 MB of memory
storage : Supports Type II CF cards, DOM, and 2.5″ laptop hard drives
port : six USB2.0 ports, four serial ports, one parallel port, optional dual network ports, and one PCI expansion slot
other : Industrial eight-wire resistive touch screen, resolution 4096 x 4096, support Windows 98/NT/2000/XP, Linux, embedded Windows XP and other operating systems
specification : XYCOM XVME-655 specifications may vary slightly depending on the product model and configuration, but the general specification mentioned is 263337
Size : net depth/length of the product is 135mm
parameter :
working voltage : Some information mentions that the working voltage is 1V, but this value is unusually low compared with the common working voltage of industrial equipment, which may be a specific configuration or description error. Generally speaking, the operating voltage of this type of equipment will be higher, such as 220V
Output frequency : The output frequency is 1kHz
Input signal type: The FBM242 can accept various input signal types, such as analog signals, digital signals, etc.
Output signal type: Output signal type of the device, such as 4-20mA, 0-10V, and so on.
Power requirements: Power voltage and current required by the FBM242.
Operating temperature range: The temperature range that the device can withstand under normal working conditions.
Storage temperature range: The temperature range that the device can withstand when it is stored or not working.
Communication interface: Whether the device supports communication interfaces, such as RS-232, RS-485, etc., and describe its communication protocol.
Manufacturer: YOKOGAWA
Model: AAI143-H50
Type: Analog input module
Number of channels: Depending on the specific configuration, multiple analog input channels are usually provided.
Input range: Depending on the model and configuration, support different analog signal input range, such as -10V to +10V, -5V to +5V, 0V to +10V, etc.
Resolution: Represents the smallest voltage change that the module can recognize, usually in millivolts (mV).
Sampling rate: The number of times per second that a module can sample, usually in Hertz (Hz).
Manufacturer: ABB
Model: CI854AK01
Type: Industrial Ethernet switch
Transmission rate: 10/100/1000 Mbps Ethernet transmission rate is supported.
Redundancy: Supports redundant configurations to improve network reliability.
Protection grade: IP30 or above, suitable for industrial environment.
Working temperature: -40°C to +70°C, suitable for harsh environment.
Power requirements: 24 V DC power input.
