The DS200RTBAG4RHC is a specialized, ultra-high-capacity remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G4RHC” suffix denotes the fourth-generation “A” revision with a redundant configuration (dual-channel redundancy for critical circuits) and a high-current configuration (prioritizing maximum output current capacity). This board combines the highest terminal density (96 terminals) , the highest output current capacity (3A per channel) , fourth-generation improvements, and redundant channel architecture for critical control circuits, making it the ultimate high-current remote I/O solution with built-in redundancy. The DS200RTBAG4RHC is designed for mission-critical power generation plants, nuclear facilities, and large offshore platforms operating GE turbines with extreme distributed I/O requirements, high-power field devices, and the need for redundant control paths for safety and reliability.
The DS200RTBAG4AHC is a specialized, ultra-high-capacity remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G4AHC” suffix denotes the fourth-generation “A” revision with a high-current configuration (prioritizing maximum output current capacity over fieldbus or advanced diagnostics). This board combines the highest terminal density (96 terminals) , the highest output current capacity (3A per channel) , and fourth-generation improvements in signal integrity, thermal management, and component selection, making it the ultimate high-current remote I/O solution. The DS200RTBAG4AHC is designed for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements, high-power field devices, and the need for the latest-generation performance.
The DS200RTBAG4A is a specialized, high-density remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G4A” suffix denotes the fourth-generation “A” revision, representing a significant evolution in the RTBA family with improved density, enhanced diagnostics, and refined thermal management compared to the third-generation “G3” models. This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O with high terminal density and improved performance. The DS200RTBAG4A offers 96 terminals (6x 16-terminal blocks) and 3A per channel output capacity, matching the ultimate capacity of the “G3” series but with fourth-generation improvements in component selection, signal integrity, and diagnostic capabilities. As a legacy spare part, the DS200RTBAG4A is among the rarest and most advanced Mark V boards, reserved for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements and high-power field devices where the latest-generation performance is essential.
The DS200RTBAG3AHC is a specialized, ultra-high-capacity remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G3AHC” suffix denotes the third-generation “A” revision with conformal coating (environmental protection) and a high-current configuration (prioritizing maximum output current capacity over fieldbus or advanced diagnostics). This board combines the highest terminal density (96 terminals) , the highest output current capacity (3A per channel) , and conformal coating for harsh environments, making it the ultimate high-current remote I/O solution without fieldbus communication. The DS200RTBAG3AHC is designed for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements, high-power field devices, and harsh environmental conditions, where maximum current delivery is prioritized over fieldbus integration.
The DS200RTBAG3AGC is the absolute pinnacle of the Mark V remote terminal board family, manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G3AGC” suffix denotes the third-generation “A” revision with conformal coating (environmental protection), advanced fieldbus integration, and the most comprehensive diagnostic system ever offered on any Mark V board. This board combines the highest terminal density (96 terminals) , the highest output current capacity (3A per channel) , conformal coating for harsh environments, integrated fieldbus interface (Profibus DP, MODBUS RTU, or Foundation Fieldbus), and the most advanced diagnostics available – including individual channel current sensing, impedance monitoring, remote communication status, diagnostic self-test, and the most extensive LED array in the entire Mark V product line. The DS200RTBAG3AGC is the definitive solution for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements, high-power field devices, harsh environmental conditions, advanced fieldbus architectures, and the need for maximum diagnostic visibility and predictive maintenance capabilities.
The DS200RTBAG3AFB is the absolute pinnacle of the Mark V remote terminal board family, manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G3AFB” suffix denotes the third-generation “A” revision with conformal coating (environmental protection) and an enhanced fieldbus configuration – making this the ultimate remote terminal board for applications requiring both extreme I/O capacity and fieldbus integration. This board combines the highest terminal density (96 terminals) , the highest output current capacity (3A per channel) , conformal coating for harsh environments, and an integrated fieldbus interface (Profibus DP, MODBUS RTU, or Foundation Fieldbus), all in a single 1.5-slot package. The DS200RTBAG3AFB is the definitive solution for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements, high-power field devices, harsh environmental conditions, and advanced fieldbus architectures.
The DS200RTBAG3AEB is the absolute pinnacle of the Mark V remote terminal board family, manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G3AEB” suffix denotes the third-generation “A” revision with conformal coating (environmental protection) and an extended monitoring configuration – the highest level of diagnostic and monitoring features available on any Mark V RTBA board. This board combines the highest terminal density (96 terminals) , the highest output current capacity (3A per channel) , conformal coating for harsh environments, and the most comprehensive monitoring system ever offered on a Mark V remote terminal board – including individual channel current sensing, impedance monitoring, remote communication status, advanced diagnostic self-test, and the most extensive LED array in the RTBA family with additional monitoring-specific indicators. The DS200RTBAG3AEB is the definitive solution for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements, high-power field devices, harsh environmental conditions, and the need for maximum monitoring visibility and predictive maintenance capabilities.
The DS200RTBAG3ADB is the absolute pinnacle of the Mark V remote terminal board family, manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G3ADB” suffix denotes the third-generation “A” revision with conformal coating (environmental protection) and an advanced diagnostics configuration (the highest level of diagnostic features available). This board combines the highest terminal density (96 terminals) , the highest output current capacity (3A per channel) , conformal coating for harsh environments, and the most comprehensive diagnostic system ever offered on a Mark V remote terminal board – including individual channel current sensing, impedance monitoring, remote communication status, and the most extensive LED array in the RTBA family. The DS200RTBAG3ADB is the ultimate solution for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements, high-power field devices, harsh environmental conditions, and the need for maximum diagnostic visibility and predictive maintenance capabilities.
The DS200RTBAG3ABB is the absolute pinnacle of the Mark V remote terminal board family, manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G3ABB” suffix denotes the third-generation “A” revision with conformal coating (environmental protection) and an enhanced “B”-level configuration – making this the ultimate remote terminal board for the most demanding applications. This board combines the highest terminal density (96 terminals) , highest output current capacity (3A per channel) , and conformal coating for harsh environments, all in a single 1.5-slot package. The DS200RTBAG3ABB is the definitive solution for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements, high-power field devices, and harsh environmental conditions.
The DS200RTBAG3A is a specialized, ultra-high-capacity remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G3A” suffix denotes the third-generation “A” revision, representing the absolute highest capacity in the RTBA family with the enhanced component selections and improvements of the “A” revision. This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O with the maximum possible terminal density and highest current capacity in the Mark V product line. The DS200RTBAG3A offers 96 terminals (6x 16-terminal blocks) and 3A per channel output capacity, with the “A” revision incorporating improved component selections, better thermal management, and enhanced reliability compared to any non-A predecessor. As a legacy spare part, the DS200RTBAG3A is among the rarest and most valuable Mark V boards, reserved for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements and high-power field devices.
The DS200RTBAG3 is a specialized, ultra-high-capacity remote terminal board assembly manufactured by General Electric (GE) for the Mark V Speedtronic Turbine Control System. The “RTBA” designation indicates a Remote Terminal Board Assembly, while the “G3” suffix denotes the third-generation revision, representing the absolute highest capacity in the RTBA family. This board serves as the primary interface between the Mark V controller and remote field devices located outside the main rack, providing a centralized termination point for distributed I/O with the maximum possible terminal density and highest current capacity in the Mark V product line. The DS200RTBAG3 offers 96 terminals (6x 16-terminal blocks) and 3A per channel output capacity, making it the ultimate solution for the most demanding remote I/O applications. As a legacy spare part, the DS200RTBAG3 is among the rarest and most valuable Mark V boards, reserved for mega-power generation plants, large offshore platforms, and industrial facilities operating GE turbines with extreme distributed I/O requirements and high-power field devices.
