Ambient humidity: 5% to 95% relative humidity (no condensation)
specification
Brand: GE (General Electric)
Product Type: Printed Circuit Board (PCB)
Functions: Provides electronic connectivity and circuit support to connect various electronic components (such as chips, sensors, switches, etc.) to perform specific control and monitoring tasks
Input voltage range: The input voltage range of the DS200FGPAG1A may vary depending on the search results. One says 12-48VDC, while another mentions that the device is rated at 220V for use in power measurement and power management applications. For the latter, however, it may refer to the voltage that the DS200FGPAG1A feeds into the grid when it acts as a smart meter, rather than the input voltage of the device itself.
Output voltage: When used as a power module or similar device, the DS200FGPAG1A may have an output voltage of 5VDC and a maximum output current of 10A.
Efficiency: greater than 90%.
Measurement accuracy: 0.2 (when used as a smart meter).
specification
Functions: Smart meters, automation of electrical equipment, etc.
Application: power measurement, power management, DCS industrial control spare parts, etc.
Scalability: Supports multiple expansion options, including 200-pin DDR SDRAM SODIMM slots and optional soldered on-board memory.
Ports: Provides 1101.10 front panel ports and optional G1 Gigabit Ethernet ports on the front panel.
Support standard: Support VME64x standard, maximum data transfer rate of 80MB/s, and support for 64-bit address bus.
Size and weight
Size: The size of the VMIVME-7807 varies depending on the release information. One is 233 mm x 160 mm x 23 mm, another is 185mm x 122mm, and another is 170mm x 105mm x 32mm. Please note that these sizes may vary by product version or configuration.
Weight: The weight also varies, with one saying 500 grams and another saying about 120 grams.
argument
Processor: Intel® Pentium® M, available at 1.1 GHz, 1.4 GHz, or 1.8 GHz
Level 2 cache: up to 2 Mbyte (1.4 GHz and 1.8 GHz options) and 1 Mbyte (1.1 GHz options)
Memory: Up to 1.5 Gbyte DDR SDRAM
Flash: Up to 2 Gbyte can start CompactFlash
System bus: 400 MHz
specification
Interface type: VME bus interface, used to communicate with other modules or systems
Signal type: Support digital and analog signal processing
Power requirements: Usually require a specific range of DC voltage power supply, such as input voltage range 85~264VAC, output voltage 24VDC
Ethernet ports: 10/100 BaseTX Ethernet port front, 10/100/1000 Base Tx Ethernet port front (non-VITA 31.1 option), 2 Gigabit Ethernet ports (VITA 31.1 optional)
Serial ports: 4 16550 compatible serial ports
USB ports: Four USB 2.0 ports
Graphics support: SVGA and DVI-I graphics support with Intel 855GME
Size and weight
Dimensions: 90 x 110 x 60 mm (or 10 x 7.6 x 1.2 inches)
Weight: Approx. 1.2 kg (or 21.3lb)
argument
Processor: Freescale 8349,667 MHz processor
Operating system: QNX operating system
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts
Operating temperature: between 0 and 65 degrees Celsius
Cooling method: Natural cooling, no fan required
specification
Application level: complies with NFPA Class 1 zone 2 specifications
Suitable motor power: Suitable motor power is 35KW (according to some specific information)
Communication interface: It has a variety of communication interfaces, such as Ethernet, serial port, etc., for data exchange with other devices, control systems or networks
Size and weight
Height: 34mm
Weight: 0.8KG
argument
Interface type: PCIe 4.0×8
Transmission rate: 30Gbps
Transmission mode: Supports optical fiber transmission modes such as SR, LR, and ER
Medium type: Optical fiber
Protocol support: Ethernet, RoCE v2
Other functions: virtualization, QoS, and PFC
specification
Application fields: Industrial control, Internet of Things, edge computing, etc
Power supply: 88-300 volts DC (specifications for VMIVME 2540-300 as feeder management relay)
Frequency: 48-62 Hz (specifications for VMIVME 2540-300 as a feeder management relay)
Size and weight
Dimensions: 18 cm wide, 16 ½ cm long, 21 ½ cm high (chassis outside dimensions, specifications for VMIVME 2540-300 as feeder management relay)
Weight: 10.00 pounds
Type: Drive control module, may also be called sensor device module or digital programming module
Features: Suitable for motor drive and automation systems, providing high precision motion control and energy efficiency. The module may also have other advanced features to meet the needs of different industrial applications.
Technical specifications: For details about technical specifications, parameters, and performance features, see the documents or documents provided by GE officials.
argument
Processor: The VMIVME-7807 is equipped with the Intel®Pentium®M processor, which can be clocked up to 1.8 GHz, and is also available in 1.1GHz and 1.4GHz specifications.
Memory: DDR SDRAM memory is supported with a maximum capacity of 1.5GB, but in some descriptions the maximum capacity is incorrectly mentioned as 512.1GB, which may be a typo.
Storage: CompactFlash Flash is available as a bootable storage option with a maximum capacity of 2GB.
Network connection: Dual Gigabit Ethernet interface provides high-speed and stable network connection capability.
specification
Size: The size of the VMIVME-7807 may vary depending on the description. One specification is 233 mm x 160 mm x 23 mm and the other 170mm x 105mm x 32mm and may vary due to different manufacturers or product ranges.
Weight: 500g, but there are also descriptions that indicate that it weighs about 120g, which may be for different configurations or versions of the product.
Power consumption: Typical value is 25 watts.
Operating temperature: 0°C to 55°C, but there are also descriptions indicating that the operating temperature range is 0°C to 70 °C, depending on the application environment and manufacturer’s specifications.
Storage temperature: -40°C to 85°C.
Humidity: 5% to 95% (non-condensing).
Vibration: 5 G to 500 Hz.
argument
Function: Labeled as a power brake buffer, it is part of General Electric’s Mark V series.
Electrical specifications: Support constant torque 575 v AC for a 375 HP motor and variable torque 380 V AC for a 300 HP motor.
Connector type: Four-pin connector for connecting the power supply/interface board (IMCP) and DS200ITXDG1ABA board.
specification
Inverter and dynamic brake buffer board control: Control via power/interface board (IMCP).
Board mount: To be mounted externally, its dimensions must meet the worst switch requirements for dynamic braking IGBTs.
Size and weight
Weight: Approximately 0.8KG
series
Mark V Series: The DS200ITXDG1ABA is part of the General Electric Company’s Mark V series.
argument
Processor: 1066 MHz Intel EP80579 microprocessor.
Memory: 256 MB DDR2 SDRAM.
Operating system: QNX Neutrino, real-time multitasking operating system.
specification
Industrial grade design: anti-vibration, anti-electromagnetic interference and durable, suitable for a variety of harsh industrial environments.
Modular design: easy to expand and upgrade, improve system flexibility and maintainability.
Multiple input and output channels: The ability to monitor multiple process variables and perform related operations to meet complex control needs.
Communication interface: Ethernet or serial communication interface that supports connection and communication with other devices or systems.
Size and weight
Dimensions: 70mm x 70mm x 35mm (L x W x H).
argument
Operating voltage: 220V (28V dc is also mentioned, voltage range 18-32VDC)
Output frequency: 620kHz (350kHz is also mentioned, but may be related to the specific application scenario or version)
Output voltage:
125 V dc (Trip solenoid valve rating)
The output current ratings for +24 V and -24 V are 3 A and 1 A respectively
+5 V DC, 4 A output
Current: Each 15 V DC output is capable of handling 0.8A, of which 0.25A can be used for external loads
specification
Part number: DS200DCFBG1BGB
Manufacturer: General Electric (GE/ GE)
Series: EX2000
Product Type: Power supply/Digital DC input/output module
Mounting: DIN rail mounting
Technology: Surface mount
