Grid view List view

Showing 2689–2700 of 3474 results

GE SR750-P1-G1-S1-HI-A20-R-E

¥5,622.00
Parameters and specifications:
Series: May belong to the 750/760 feeder management relay in the GE Multilin series.
Power supply: 88-300 volts DC.
Frequency: 48-62 Hz.
Analog outputs: Eight 4-20 mah analog outputs.
Protection function: When the current, voltage and other parameters in the power system exceed the set value, the relay protection device will quickly act to cut off the fault circuit or issue an alarm, so as to protect the safety of the equipment and system.

GE IC698CPE010

¥4,952.00
Parameters and specifications:
Type: DCS (Distributed Control System) Central processing unit module.
Interfaces: With 30 interfaces, you can connect and communicate with other modules or devices.
Voltage, resistance, current: voltage is 90V, resistance is 32Ω, current is 19A.
Memory: 260MB of storage.
System: Compatible with PLC (Programmable logic Controller) systems for industrial automation and control applications.
Programming: Support ladder diagram and C language programming.
Communication: Communicate with programmers and HMI devices via embedded Ethernet ports or serial ports using the SNP slave station protocol.
Storage: Contains 10 Mbytes of battery backup user memory and 10 Mbytes of non-volatile flash user memory.

GE IC695CPE310

¥5,260.00

Parameters and Specifications:

  • Processor: 1.1 GHz Atom processor1.
  • Memory: 10 MB1.
  • Embedded Ethernet Interface: Supports two connections rated at 10Mb/s and 100Mb/s1.
  • Serial Ports: RS-485 and RS-232123.
  • Program Blocks: Supports up to 512 program blocks, with each block up to 128 KB12.
  • Protocols: Modbus RTU Slave, SNP, and Serial I/O1.
  • Programming Languages: Supports ladder diagram, structured text, C, or function block diagram1.

GE SR750-P5-G5-S5-HI-A20-R

¥5,262.00

Parameters and Specifications:

  • Platform: Based on GE Multilin P5 platform12.
  • Input Channels (Switch Quantity): 512.
  • Output Channels (Switch Quantity): 512.
  • Designed For: High-voltage grid12.
  • Analog Input Channels: 2012.
  • Record Function: Yes12.
  • Actuator Type: Electrical12.
  • Power Supply Voltage: 88-300VDC, 70-265VAC2.

GE 8521-HC-MT

¥5,623.00

Parameters and Specifications:

  • Control Principle: Other (Advanced multi-CPU intelligent control, combining microprocessor-based digital software to comprehensively control UPS parameters)1
  • IGBT Inverter Technology: Combined with Pulse Width Modulation (PWM) to reduce system noise and power loss, ensuring quality voltage output under various operating loads1
  • Modular Design: Reduces Mean Time To Repair (MTTR) and improves maintainability1
  • Display Interface: Ultra-intelligent power management with a clear LCD panel providing UPS status information1

GE 8502-BI-DP

¥4,152.00

Parameters and Specifications:

  • Model: 8502-BI-DP
  • Manufacturer: GE Automation
  • Series: 8502 Series Bus Interface Modules
  • Supported Bus Protocol: PROFIBUS DP
  • Data Transmission Rate: Up to 6 Mbps
  • Node Address Range: 0 to 255
  • Number of Supported I/O Modules: Up to 24
  • Operating Temperature: 0°C to +60°C1 or -20℃~+60℃2
  • Protection Level: IP651 or IP202

GE IC695CPE310

¥5,469.00

Parameters and Specifications:

  • Model: FCP280 RH924YA
  • Display: 7.0″ TFT LCD with LED backlight, 800×480 resolution, 16.77 million colors, adjustable brightness12.
  • Touch Panel: Four-wire resistive touchscreen, with LCD life of over 50,000 hours12.
  • Memory: 128MB12.
  • External Interfaces:
    • Download port: RS232/RS485/RS422
    • PLC port: RS485 (X-Net bus)
    • USB ports:
      • USB-B (USB 2.0 compliant), for downloads
      • USB-A (USB 2.0 compliant), for U-disk, UT/ET models support Ethernet2.

GE IC693CPU374

¥4,250.00

Parameters and Specifications:

  • Manufacturer: GE Fanuc
  • Product Number: IC693CPU374
  • CPU Type: Single-slot CPU Module with Embedded Ethernet Interface
  • Processor Speed: 133 MHz (or 33 MHz, depending on sources)
  • Processor Type: Embedded 586
  • Typical Scan Rate: 0.15 milliseconds per 1K logic (Boolean contacts)
  • Memory: 240KB User Memory (RAM and Flash)
  • Max Memory: 64KB
  • Communication Interfaces: Serial Communication Ports, Dual Ethernet Ports (10/100 Mbps, Auto-sensing)
  • Protocols Supported: SNP, SNPX, SRTP, Modbus/TCP
  • Operating Temperature: 0°C to 60°C
  • Storage Temperature: -40°C to +85°C1234

GE IC697CPM790

¥6,235.00

Parameters:

  • Processor: 64 MHz, 32-bit Floating Point Central Processing Unit12.
  • Memory: 1 Mbyte Memory, including 1 Mbyte of battery-backed memory12.
  • Operating Voltage: 5V DC1.
  • Maximum Power Consumption: 20W3.

Specifications:

  • Operating Temperature Range: 0℃ ~ 60℃3.
  • Storage Temperature Range: -40℃ ~ 85℃3.
  • Discrete Inputs and Outputs: Up to 12K (mixed simplex mode only)24.

GE IC695CRU320

¥4,150.00

Parameters and Specifications:

  • Processor: 1 GHz Intel Celeron M microprocessor123
  • Memory: 64 MB non-volatile flash memory and 64 MB battery-backed RAM123
  • Serial Ports: Two independent serial ports15
  • Operating System: PLC system4
  • Operating Environment: Ambient temperature: 0 to 60°C (32 to 140°F); not suitable for high humidity, dusty, debris-filled, or wet industrial environments3

Dimensions and Weight:

  • Size: Not specified in the search results.
  • Weight: Approximate 1.5 pounds5 or 2.6 kg4.

GE IC693CPU374

¥6,235.00

Parameters and Specifications:

  • Manufacturer: GE Fanuc
  • Product Number: IC693CPU374
  • CPU Type: Single-slot CPU Module with Embedded Ethernet Interface
  • Processor Speed: 133 MHz
  • Processor Type: Embedded 586
  • Typical Scan Rate: 0.15 ms per 1K logic (Boolean contacts)
  • Memory Type: RAM and Flash
  • Total User Memory: 240KB (245,760 bytes)
  • Protocol Support: SNP and SNPX on RS-485 Port
  • Built-in Ethernet Communication: Ethernet (built-in) – 10/100 base-T/TX Ethernet switch
  • Number of Ethernet Ports: Two, with auto-sensing 10/100 baseT/TX ports, RJ-45 connector
  • Number of IP Addresses: One
  • Protocols: SRTP and Ethernet Global Data (EGD)
  • Operating Temperature: 0 to 60°C (32 to 140°F)
  • Storage Temperature: -40°C to +85°C12

GE IC698CPE010

¥6,325.00

Parameters and Specifications:

  • Model: GE IC698CPE010
  • Type: Central Processing Unit (CPU) Module
  • Series: PACSystem RX7i Series1
  • Function: Used for controlling and monitoring industrial processes2
  • Communication Interfaces: Supports various interfaces such as Ethernet, serial communication, etc.2
  • Processing Power: Powerful processing capabilities, capable of executing complex control algorithms and logic2
  • Memory: Integrated memory for storing programs, data, and system configurations2
  • Programming: Supports standard programming languages such as LD (Ladder Diagram), IL (Instruction List), and ST (Structured Text)2
  • Real-time Performance: Provides real-time control and response, suitable for high-performance and real-time applications2