Grid view List view

Showing 2605–2616 of 3474 results

IC670GBI102C

¥6,235.00

Parameters and specifications
Brand: GE (US General Electric)
Model: IC670GBI102C
Type: Industrial power module
Structure: modular
Installation mode: Onsite installation
series
The IC670GBI102C is a model in GE’s series of industrial power modules.

IC695CPU310-FT

¥5,265.00
Parameters and specifications:
It has an Intel Celeron (Pentium III) microprocessor with 10 MB RAM and 10 MB flash memory.
Three different Serial protocols are supported (Modbus RTU Slave, SNP, and Serial I/O).
The CPU itself supports up to 512 blocks, each with a maximum size of 128 KB.
The typical execution speed is 0.195 ms /1000 Boolean instructions.
It comes with up to 10 MB of battery-powered RAM and 10 MB of non-volatile flash memory.
Support for floating-point data formats.
There is an internal day clock that drifts up to 2 seconds per day and has an internal timing accuracy of up to 0.01%.
Operating temperature range is 0 to 60 degrees Celsius.
Supports RS-232/RS-485 interfaces.

IC693PWR331C

¥4,158.00

Parameters and specifications
Brand: GE
Model: IC693PWR331C
Function: As a power module, it is used to provide power support for other modules or equipment in the industrial automation system.
Size and weight
The specific size and weight information is not explicitly given in the search results, but based on other GE brand PLC power modules, it can be inferred that the IC693PWR331C should also be modular installation, and the size and weight are moderate to meet the needs of industrial automation systems.

IC695PNS001

¥4,158.00

Parameters and specifications
Series: GE Fanuc RX3i series
Type: PACSystems PROFINET scanner module
Function: Connect the remote universal RX3i I/O rack of the 90-30 Series or RX3i module to the PROFINET I/O controller
Size and weight
Specific size and weight information is not explicitly given in the search results.
trait
Connectivity: Support PROFINET I/O communication protocols, providing efficient data exchange capabilities.
Compatibility: Compatible with other modules and devices of GE Fanuc RX3i series for easy system integration.

IC755SUE1OCTD

¥5,265.00

Parameters and specifications
Brand: GE (General Electric)
Model: IC755SUE1OCTD
Operating voltage: Standard V (but the specific voltage value is not given)
Output frequency: standard kHz
series
The IC755SUE1OCTD is part of GE’s family of General Electric modules.
trait
Generality: GE General Electric modules generally have good versatility and compatibility and can be adapted to different industrial automation and control systems.
Reliability: The GE brand is known for its high quality and reliability, and these modules typically operate stably in a variety of industrial environments.

IC695ALG616

¥5,625.00

Parameters and specifications
Type: Non-isolated differential analog input current/voltage module.
Input channels: 16 single-ended or 8 differential input channels.
Measuring range:
Current range: 0 to 20 mA, 4 to 20 MA, ±20 MA.
Voltage range: ±10 volts, 0 to 10 volts, ±5 volts, 0 to 5 volts, 1 to 5 volts DC.
ADC conversion resolution: 24 bits.
Programming language support: sequence function diagram (SFC), ladder diagram (LD), function module diagram (FBD), statement table (IL), structure text (ST), etc., while supporting C, Basic and other languages.
Size and weight
Dimensions: 34 x 145 x 140 mm.

IC693CMM321

¥5,416.00

Parameters and specifications
Brand: GE General Electric
Model: IC693CMM321
Supported communication protocols, such as Modbus RTU and TCP, ensure efficient and stable data transmission between devices
Input voltage: 24VDC
Output voltage: 24VDC
Output points: 8 isolated points
Operating temperature range: -40℃~85℃
Communication protocol: Ethernet /IP
Enclosure protection class: IP67
Resolution: 12 bits
Output accuracy: less than 0.25%

IC695NIU001

¥4,151.00

Parameters and specifications
Model: IC695NIU001
Brand: GE General Electric
Package: Logical serial communication module
Working voltage: 24VDC
Communication interface: RS-485
Communication rate: 9600bps
Measuring range: 0~5000ppm
Overall dimensions:
Search results 1 mentioned 120mm×80mm×40mm
Search result 3 mentions 252530

IC695PBM300

¥4,102.00

Parameters and specifications
Communication capability: Supports communication with up to 125 DP slaves, each supporting data transfer sizes of 244 bytes in and 244 bytes out.
Data transfer rate: All standard data rates are supported, including 9.6 kBit/s, 19.2 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, and 12 MBit/s.
Status information: Provides status information such as slave status bit array table, network diagnostic counter, DP master diagnostic counter, firmware module revision, and slave diagnostic address.
Firmware: Comes with upgradable firmware that is received indirectly via the host controller via the WinLoader software utility.

IC695ALG616

¥4,120.00

argument
Analog input type: non-isolated differential analog voltage/current input module.
Input channels: 16 single-ended or 8 differential input channels.
Current range: 0 to 20 mA, 4 to 20 MA, ±20 MA.
Voltage range: ±10V, 0 to 10V, ±5V, 0 to 5V, 1 to 5V DC voltage.
Resolution: 24-bit ADC conversion resolution.
specification
Programming language support: Sequential Function Diagram (SFC), ladder diagram (LD), Function Module diagram (FBD), statement table (IL), and structured text (ST).
Size and weight
Dimensions: 34 x 145 x 140 mm (UL).

IC086SLM082

¥5,262.00

Parameters and specifications
Brand: GE in the United States, or possibly Emerson or another manufacturer’s brand.
Model: IC086SLM082.
Number of ports: 10, including 8 10/100BASE-T (X) electrical ports and 2 100/1000Base-X SFP slots.
Temperature range: -40~70℃, ensure stable operation in harsh environment.
Supported redundancy technologies: Redundant Ring (250 nodes in a single ring network, self-healing time <10ms), RSTP/STP (IEEE 802.1W/D).
The IC086SLM082 may belong to the managed Ethernet switch family.

IC695ALG728

¥6,230.00
Parameters and specifications:
Output channels: Has eight (8) non-isolated output channels that can be configured for voltage and current.
Output signals: Generate +/-10 VDC, 0-10 VDC, 0-20 mA, and 4-20 mA output signals.
Resolution: Voltage resolution is 14.9 bits; The resolution is 0.20 bits at 15-9 mA; The resolution is 4.20 bits at 15-6 mA.
Communication protocol: Support for High Speed Addressable Remote Sensor (HART) protocol version 5.0.
Calibration accuracy: 15.25% of full scale at 0°C and 30.60% of full scale at 0°C.
Update time: The update time for each channel is 16 ms (HART communication) and 8 ms (not using HART communication).
Data format: The output data format can be configured as a floating point IEEE 16-bit or 32-bit integer using 32-bit registers.
Power requirements: An external power supply is required to operate, and the appropriate power supply must provide a maximum power current of 19.2-30.0 VDC and 250 mA.