Product Type:
Motor management relay
Power module (in some cases)
Controller (in specific application)
Programmable logic controller plug-in library (in a specific software environment)
For motor management relays, control power HI = 70 to 265 V AC, 48 to 62 Hz
For the controller, the input voltage is 24 VDC
Interface type: PCI Express x4
Sampling rate: 100 MS/s
Resolution: 16 bits
Number of channels: 4 differential or 8 single-ended
Memory: 256 MB
Support signal generator: Yes
Size and weight
Dimensions: 167.6mm x 111.2mm
Operating voltage: Support a variety of power inputs, including DC 90-300V and AC 70-265V @ 48-62 Hz.
Analog output: A20 = 4-20 mA.
Phase current input: P1 = 1 Phase A CT secondary.
Control power supply: HI = 70 to 265 V AC, 48 to 62 Hz or DC: 90-300 V.
Output frequency: 60 Hz (some information indicates 85 Hz, but may vary by model or configuration).
System environment: Supports operation in the temperature range from -40 °C to +60 °C.
Applications: IS215WEPAH2B (or IS215WEPAH2BB) is suitable for pressure measurement applications that require high accuracy, such as pressure monitoring in the oil and gas industry, reaction control in the chemical industry, and power industry.
Accuracy: Providing accurate data is essential to ensure the safety and efficiency of industrial processes.
Redundancy capability: The capability for simplex or triple redundancy application types can be configured according to the reliability requirements of the system.
Software support: When using the WEPA model in Mark VI systems, it is located in a fully programmable control system that supports three different software frames.
Model: DS200DCFBG1BKC
Rated power: 2 kW
Rated voltage: 480 VAC
Rated current: 4.2A
Rated frequency: 50 Hz/60 Hz
Output frequency: 0 Hz to rated frequency
Output current: 0 A to rated current
Control mode: PID control, torque control, speed control, etc
Braking mode: regenerative braking, DC braking
– Communication interface: Ethernet /IP
– Supported networks :ControlNet, EtherNet/IP
– Communication speed: 10/100 Mbit/s
– Maximum number of connections: 32 per adapter
– Operating temperature :0 ~ 60 degrees
– Input voltage: 5.1V DC
– Power consumption :800ma @ 5.1v DC
– Input channel: analog input, digital input
– Output channel: analog output, digital output
– Communication ports: Ethernet, serial, USB
– Communication protocol :Modbus TCP/IP, Modbus RTU, DNP3
– Processor :ARM Cortex
– Memory :Flash Memory and RAM
– Power supply :24VDC
– Operating temperature :-20 ° C to 60 ° C
– Enclosure :IP65 rating
GE WESCOM D200 VME is a high performance, reliable, easy to use and maintain industrial automation power interface module
It uses an open VME architecture and distributed processing technology to seamlessly integrate with other industrial automation equipment and systems
The weight is about 3.6 KG 3 or 3.5KG
The main function is to provide stable and reliable power output for industrial automation systems to meet the high requirements of the system for power supplies
It is widely used in industrial automation applications such as mechanical drives, gas turbines and steam turbine generators
– Input channel: analog input, digital input
– Output channel: analog output, digital output
– Communication ports: Ethernet, serial, USB
– Communication protocol :Modbus TCP/IP, Modbus RTU, DNP3
– Processor :ARM Cortex
– Memory :Flash Memory and RAM
– Power supply :24VDC
– Operating temperature :-20 ° C to 60 ° C
– Enclosure :IP65 rating
Brand: GE
Model: IC660ELB921H
Type: Module
Product Type: Relay Output Module
CPU Redundancy Support: Yes
Contact Layout: Normally Open
Configuration Software: PCIM Configuration Software
Operating Temperature: 0–60°C (32–140°F)
Storage Temperature: -40 to +70°C (-40 to 158°F)
Relative Humidity: 5-95% (non-condensing)
Operating Height: 40,000 feet
Operating Vibration: 0.2 inch displacement
Operating Shock: 5 G for 10 milliseconds
LED Indicators: Status LEDs for board health and communication status
Processor Type: 80386EX
Processor Speed: 25MHz
Operating Temperature Range: 0 to 60°C (32 to 140°F)
Typical Scan Rate: 0.22 ms/K
Maximum User Program Memory: 32K bytes
Power Requirement: +5 VDC, 670 mA
Rated Power: 220kW
Rated Voltage: 400VAC
Rated Current: 320A
Rated Speed: 3000rpm
Overload Capacity: 150% for 1 minute
Speed Control Accuracy: ±0.01%
Torque Control Accuracy: ±0.5%
Logic block limit: The maximum loop value allowed for each logic block (main program or subroutine) is 3000, and the logic is repeatedly executed by the PLC.
Programming support: Support a variety of programming languages and development tools, convenient for users to develop and debug programs.
Size: The exact size information is not given directly, but the regular size may be 430mm(D) x 220mm(W) x 130mm(H) or can be customized on request.