Model : IS215UCVGH1A
Type : VME single-slot controller board
Application scenario : The Mark VI series of GE Speedtronic control systems
processor : Intel ultra low voltage Celeron 650 MHz
Memory : 128 MB flash, 128 MB SDRAM
communications : Two 10BaseT/100BaseTX Ethernet ports
I/O support : Supports various I/O modules
Supply voltage : 24 V DC
power consumption : <20 W
Model : DS200GASCF1AEG
action : This product is a high performance device intended primarily for specific industrial or scientific applications .
Main functions : to provide accurate and stable performance to meet the needs of specific fields.
Application scenario : May be applicable to scientific research, industrial testing, environmental monitoring and other fields.
Repeated mentioned weight (adjustment)
Model : IS420UCSCH2A.
contact capacity : DC 48V/1A.
Measuring range : 0ug\~100mg, test water between 3ug\~1000ug error is less than ±2ug, greater than 1000ug error is less than ±0.2%.
resolution : 0.1ug.
electrolytic current : 0\~400mA.
power consumption : standby power consumption of 6W, working power consumption of 35W.
Power supply voltage : AC220V±20%, 50HZ±10%.
It is used to describe the change curve of electrolysis speed to time in real time, display the signal of measuring electrode, correct the measurement result, and record and alarm functions.
Type : quad-core controller.
port : seven RJ-45 ports, three Ethernet ports, and three additional ENET ports.
microprocessor : 600 MHz Intel EP80579.
Memory : 256 MB DDR2 SDRAM with error correction code (ECC), flash supported SRAM, NAND flash size is 2 GB.
operating system : QNX Neutrino.
features : Pre-installed special software, can run steps or blocks, without restarting the system to change the control software online.
Weight : 2.4 pounds (or about 1.09 kilograms).
power supply : provides stable power supply for various parts of the system, such as controller, sensor, actuator, etc.
industrial automation : widely used in generator sets and industrial automation systems to ensure the normal operation of the system.
Input voltage range : 38 to 115 VAC.
Output frequency range : 0 to 500kHz (depending on input voltage).
function integration : with control level power supply, electric field power supply, driver and AC/DC monitoring circuit.
Configurability : 12 jumpers and 7 dip switches with configurable system options.
servo I/O function : IS200TSVOH1B is a General Electric Mark VI series servo I/O terminal board, used in gas turbine control systems to achieve the servo input/output function.
input quantity : 6 LVDT inputs.
Output quantity : two outputs.
Supply voltage : 24V DC.
Analog output current : 0-20mA.
Exciting voltage : 24V DC.
Maximum lead resistance : 15Ω.
Operating temperature : 30 to 50°C.
Frequency : 50 or 60Hz
Industrial Automation communications : IS420ESWBH3A, part of GE Speedtronic Mark VIe gas turbine control systems, is designed for real-time industrial control solutions for industrial automation systems, enabling fast, stable and reliable data transfer between equipment.
port : 16 10/100Base-TX copper ports (RJ-45) with no optical fiber ports.
compatibility : Supports 802.3u, 802.3U, and 802.3x network protocols, and has automatic negotiation function.
buffer : Minimum 256KB buffer with 4K MAC address.
Data transfer and exchange : As a multi-mode reflective memory switch, it is used for data transmission and exchange with high real-time requirements.
Number of ports : 8 ports.
Transmission speed : The fiber reflection memory network has a high transmission speed of 170Mbyte/s.
node : supports a maximum of 256 nodes.
Network configuration : Supports ring and star configurations, which are often combined in practical applications.
Industrial automation network support : Provides reliable and high-performance network connections for industrial automation systems.
port configuration : 16 10/100Base-TX copper ports, 1 multi-mode 100Base-FX fiber port.
Network functions : Supports a variety of network configurations and protocols, such as 802.3u, 802.3x.
Performance indicator : The buffer size must be at least 256KB and 4K MAC addresses are supported.
power input : Redundant dual power input.
Installation mode : Supports parallel or vertical installation.
System compatibility : Compatible with GE Speedtronic MKVIe gas turbine control systems.
Model : DS200DCFBG1B
Technical specifications : The product follows specific industry standards and design specifications to ensure stable and reliable performance
Parameter setting : Contains multiple adjustable parameters to meet different application scenarios
Weight information : Product weight is an important consideration in design and application, DS200DCFBG1B weight is optimized to ensure the robustness of the structure, but also easy to install and transport
specification : IS200TSVOH1B is a servo I/O terminal board from General Electric (GE) in the Mark VI or Mark VIe series for gas and steam turbine control systems.
action : The terminal board operates the electro-hydraulic servo valve of the steam/fuel valve under the guidance of the servo control (VSVO) board and determines the valve position by a linear variable differential transformer (LVDT). It supports loop control algorithm and handles LVDT position feedback, excitation, two-way servo current output, etc.
The IS200TSVOH1B weighs 2 pounds (or 2.00 pounds) without packaging. When preparing for delivery, the actual weight is heavier due to internal and external packing, padding, and anti-static packaging.
IS215UCVEM06A is mainly used to provide reliable Ethernet communication, connecting controllers and other devices to achieve data exchange and control. It is widely used in thermal power plants, nuclear power plants and other industrial environment, as a part of the steam turbine control system, to realize the monitoring and control of steam turbines
power supply : Support a variety of power supply voltages, such as 24V DC, 110-220V AC, depending on the application scenario
Processor speed : While specific speeds may vary by model or configuration, some GE controller boards reach 600 MHz
interface : Provides multiple Ethernet ports, including RS-232 and RS-485, for connecting various network devices