Grid view List view

Showing 145–156 of 3474 results

GE IC695HSC304

¥5,299.00

Product Parameters

  1. Counter Channels: 4 independent high-speed counter channels, supporting simultaneous operation without interference
  2. Maximum Input Frequency: 1 MHz per channel, capable of handling high-speed pulse signals from incremental encoders and pulse generators
  3. Counting Modes: Up-count, down-count, up/down count, pulse-width measurement, and frequency measurement modes
  4. Input Type: Differential quadrature (A/B phase) and single-ended inputs, compatible with NPN/PNP sensors and 5V/24V encoder signals
  5. Count Range: 32-bit signed integer (-2,147,483,648 to 2,147,483,647) per channel for extended measurement scope
  6. Output Signals: 4 configurable alarm outputs (PNP/NPN, 2A @ 24VDC) for threshold-based control actions
  7. PLC Compatibility: Fully compatible with all GE RX3i CPU modules (IC695CPU374, IC695CPU380) and RX3i rack units (10-slot, 16-slot)
  8. Operating Environment: Temperature range of -40°C to 70°C (-40°F to 158°F); humidity range of 5% – 95% (non-condensing)
  9. Physical Dimensions: 140 mm × 85 mm × 120 mm (5.51 in × 3.35 in × 4.72 in), DIN rail mountable
  10. Certifications: UL 508, CE, IEC 61131-2, and ATEX compliant, meeting global industrial safety and performance standards

GE IC695GCG001

¥999.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695GCG001
Product Type Global Clock Generator Module for GE RX3i Series PLC
Synchronization Technologies GPS, NTP v4, SNTP, PTP (Precision Time Protocol, IEEE 1588)
Time Accuracy ±1 ms (GPS mode); ±5 ms (NTP mode)
GPS Receiver Built-in high-sensitivity GPS antenna (with external antenna port for harsh environments)
Network Interface 1 x RJ45 Ethernet port (10/100 Mbps) for NTP/PTP communication
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Power Consumption 2.8 W typical (24 VDC input)
Input Voltage 24 VDC (18-36 VDC input range)
Compatibility Fully compatible with all GE RX3i series CPU modules and control rack units
Form Factor Rack-mounted (single-slot design for RX3i 3U rack units)
Dimensions (W x H x D) 44 mm x 132 mm x 315 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001, RoHS compliant
Weight 0.5 kg

GE IC695ETM001-EJ

¥999.00

Product Parameters

  1. Communication Ports: 2 x 10/100/1000 Mbps Gigabit Ethernet ports (RJ45), supporting auto-negotiation, full-duplex mode, and Ethernet/IP redundancy
  2. Supported Protocols: Native support for Ethernet/IP, Modbus TCP, Profinet IO, OPC UA, DNP3, and MQTT; optional BACnet IP for building automation integration
  3. Data Throughput: Maximum transmission rate of 1 Gbps per port, with a latency of less than 1 millisecond for time-sensitive operations
  4. PLC Compatibility: Fully compatible with all GE RX3i CPU modules (including IC695CPU374, IC695CPU380) and RX3i rack units (10-slot, 16-slot)
  5. Operating Environment: Temperature range of -40°C to 70°C (-40°F to 158°F); humidity range of 5% – 95% (non-condensing)
  6. Power Consumption: 3.0 W (typical) at 24 VDC input, 3.8 W (max), energy-efficient for continuous industrial operation
  7. Physical Specifications: 140 mm × 85 mm × 120 mm (5.51 in × 3.35 in × 4.72 in), DIN rail mountable (EN 50022 standard)
  8. Certifications: UL 508, CE, ATEX, IEC 61131-2, and IEEE 802.3 compliant, meeting global industrial safety and networking standards
  9. Firmware Support: Field-upgradable firmware via GE Proficy Machine Edition (v9.5 and above) for protocol expansion and performance enhancements
  10. Protection Features: Built-in ESD protection (±8 kV contact, ±15 kV air) and surge protection for Ethernet ports

GE IC695ETM001-CD

¥5,299.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695ETM001-CD
Product Type Ethernet Communication Module for GE RX3i Series PLC
Communication Speed Gigabit Ethernet (10/100/1000 Mbps, auto-negotiation)
Supported Protocols Ethernet/IP, PROFINET IO, Modbus TCP, DNP3, IEC 61850, UDP/TCP
Network Ports 2 x RJ45 Gigabit Ethernet ports (with LED status indicators)
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Power Consumption 3.2 W typical (24 VDC input)
Input Voltage 24 VDC (18-36 VDC input range)
Compatibility Fully compatible with all GE RX3i series CPU modules (IC695CPU315, IC695CPU320, etc.)
Form Factor Rack-mounted (fits RX3i 3U rack units); single-slot design
Dimensions (W x H x D) 44 mm x 132 mm x 320 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001, RoHS compliant
Weight 0.6 kg

GE IC695EMT001

¥999.00

Product Parameters

  1. Communication Ports: 2 x 10/100/1000 Mbps Gigabit Ethernet ports (RJ45 connectors), supporting auto-negotiation and full/half-duplex modes
  2. Supported Protocols: Native support for Ethernet/IP, Modbus TCP, Profinet IO, OPC UA, and DNP3; optional support for BACnet IP and MQTT
  3. Data Transfer Rate: Maximum throughput of 1 Gbps per port, enabling high-volume real-time data transmission
  4. Module Compatibility: Fully compatible with GE RX3i series PLCs (IC695CPU370, IC695CPU374, etc.) and 10-slot/16-slot rack units
  5. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for harsh industrial environments
  6. Power Consumption: 2.5 W (typical) at 24 VDC input, energy-efficient for long-term operation
  7. Physical Dimensions: 140 mm × 85 mm × 120 mm (5.51 in × 3.35 in × 4.72 in), DIN rail mountable
  8. Certifications: UL 508, CE, IEC 61131-2, ATEX, and IEEE 802.3 compliant, meeting global industrial standards
  9. Operating Humidity: 5% – 95% (non-condensing), adapting to humid industrial settings
  10. Firmware Update: Support for in-field firmware upgrades via GE Proficy Machine Edition software

GE IC695CRU320-EZ

¥5,299.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695CRU320-EZ
Product Type User-Friendly PLC Control Rack Unit (CRU) for RX3i Series
Slot Capacity 10 expansion slots (supports all RX3i CPU, I/O, communication, and specialty modules)
Power Distribution Integrated redundant power supply interface; 24 VDC (18-36 VDC input range); distributed power output
Thermal Management Enhanced passive heat dissipation fins; low-noise active cooling fan; built-in temperature alert sensor
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Humidity Resistance 5% – 95% non-condensing (IEC 60068-2-34 compliant)
Vibration & Shock Resistance IEC 60068-2-6 (vibration: 10-500 Hz); IEC 60068-2-27 (shock: 50g peak acceleration)
Form Factor Rack-mounted; 3U height; 19-inch standard industrial rack compatible
Dimensions (W x H x D) 483 mm x 132 mm x 340 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001, RoHS compliant
Weight 4.8 kg

GE IC695CRU320-EN

¥999.00

Product Parameters

  1. Rack Type: 10-slot rack unit, compatible with GE RX3i series PLC modules (CPU, I/O, communication, and specialty modules)
  2. Power Distribution: Integrated power bus supporting 24 VDC input, with overcurrent and overvoltage protection
  3. Signal Transmission: Backplane bandwidth of 1 Gbps, enabling high-speed data transfer between modules with minimal latency
  4. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for extreme industrial conditions
  5. Physical Dimensions: 350 mm × 120 mm × 85 mm (13.78 in × 4.72 in × 3.35 in), DIN rail mountable (EN 50022 standard)
  6. Weight: 1.8 kg (3.97 lbs), lightweight yet robust for easy installation and maintenance
  7. Certifications: UL 508, CE, IEC 61131-2, and ATEX certified, meeting global safety and performance standards
  8. Module Compatibility: Fully compatible with GE IC695CPU, IC695I/O, IC695COMM, and IC695 specialty modules
  9. Environmental Protection: IP20 rating for dust protection, with a corrosion-resistant aluminum alloy chassis
  10. Operating Humidity Range: 5% to 95% (non-condensing), adapting to humid industrial settings

GE IC695CRU320

¥2,599.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695CRU320
Product Type PLC Control Rack Unit (CRU) for RX3i Series
Slot Capacity 10 expansion slots (supports CPU, I/O, communication, and specialty modules)
Power Distribution Integrated redundant power supply interface; 24 VDC distributed power output
Thermal Management Built-in active cooling fan; passive heat dissipation fins; temperature monitoring sensor
Operating Temperature -40°C to 75°C
Storage Temperature -55°C to 85°C
Humidity Resistance 5% – 95% non-condensing
Vibration & Shock Resistance IEC 60068-2-6 (vibration); IEC 60068-2-27 (shock) compliant
Form Factor Rack-mounted; 3U height; 19-inch standard rack compatible
Dimensions (W x H x D) 483 mm x 132 mm x 350 mm
Certifications UL 508, CE, ATEX, IEC 61131-2, ISO 9001 compliant
Weight 5.2 kg

GE IC695CPU374

¥5,299.00

Product Parameters

  1. Processor Performance: 32-bit RISC processor with a clock speed of 1.2 GHz, supporting parallel execution of control logic and data processing
  2. Memory Capacity: 256 MB DDR3 RAM (expandable up to 1 GB) and 512 MB non-volatile flash memory for program storage
  3. I/O Capacity: Supports up to 8,192 digital I/O points and 1,024 analog I/O points through expansion racks
  4. Communication Protocols: Native support for Ethernet/IP, Modbus TCP, Profinet, and DNP3; optional support for BACnet and OPC UA
  5. Operating Temperature Range: -40°C to 70°C (-40°F to 158°F), suitable for harsh industrial environments
  6. Power Supply: 24 VDC (18-32 VDC) input, with redundant power supply support for high-availability applications
  7. Programming Software: Compatible with GE Fanuc Automation iFIX and Proficy Machine Edition (version 9.0 and above)
  8. Physical Dimensions: 140 mm × 85 mm × 120 mm (5.51 in × 3.35 in × 4.72 in), DIN rail mountable
  9. Certifications: UL 508, CE, ATEX, and IEC 61131-2 compliant, meeting global industrial safety standards

GE IC695CPU320

¥5,299.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695CPU320
Processor Type 32-bit high-performance RISC processor
Clock Speed 1.5 GHz
Memory Capacity 4 GB DDR4 RAM; 16 GB industrial-grade non-volatile flash memory
I/O Capacity Supports up to 16384 digital I/O points; 2048 analog I/O points
Communication Ports 4 x Gigabit Ethernet ports; 2 x RS-485 serial ports; 2 x USB 3.0 ports; 1 x HDMI port
Operating Temperature -40°C to 75°C
Power Supply 24 VDC (18-36 VDC input range); 6 W typical power consumption
Programming Software GE Fanuc VersaPro, GE CIMPLICITY, GE iFIX
Certifications UL 508, CE, ATEX, IEC 61131-3, ISO 9001 compliant
Form Factor Rack-mounted; 3U height; fully compatible with GE RX3i rack systems

GE IC695CPU31

¥2,599.00

Product Parameters

Parameter Category Specification Details
Brand & Model GE IC695CPU31
Product Series GE PACSystems RX3i PLC Compact Mid-Range CPUs
Processor Type 32-bit dual-core industrial-grade microprocessor (optimized for standard control tasks)
Program Memory 64 MB non-volatile flash memory (battery-free data retention, shock-resistant)
Data Memory 32 MB RAM (expandable up to 128 MB via industrial-grade memory modules)
Execution Speed 0.08 microseconds per boolean instruction; 0.2 microseconds per floating-point instruction
Supported Communication Protocols Ethernet/IP, Modbus TCP, GE SRTP (native support for mainstream industrial networks)
I/O Capacity Supports up to 32,768 discrete I/O points and 4,096 analog I/O points
Ethernet Ports 2 x 10/100/1000 Mbps Gigabit Ethernet ports (supports basic network redundancy)
Security Features Basic access control, firmware integrity verification, compliance with industrial EMC standards
Operating Voltage 5V DC (powered by RX3i chassis backplane, low power consumption)
Operating Temperature Range 0°C to 60°C
Storage Temperature Range -40°C to 85°C
Humidity Tolerance 5% – 95% (non-condensing, moisture-resistant circuitry)
Physical Dimensions 85mm × 130mm × 70mm (DIN rail mountable, RX3i standard single-slot form factor)
Net Weight Approximately 0.38kg
Certifications UL, CE, CSA, ISO 9001:2015, IEC 61131-3, RoHS compliant, IEC 61000-4-2 (ESD protection)
Mean Time Between Failures (MTBF) ≥ 340,000 hours

GE IC695CPU315-CD

¥2,999.00

Product Parameters

Parameter Category Specifications
Brand & Model GE IC695CPU315-CD
Processor Type 32-bit RISC processor
Clock Speed 1.2 GHz
Memory Capacity 2 GB DDR4 RAM; 8 GB non-volatile flash memory
I/O Capacity Supports up to 8192 digital I/O points; 1024 analog I/O points
Communication Ports 2 x Ethernet (10/100/1000 Mbps) ports; 1 x RS-232/485 serial port; 1 x USB 2.0 port
Operating Temperature -40°C to 70°C
Power Supply 24 VDC (18-32 VDC input range); 5 W typical power consumption
Programming Software GE Fanuc VersaPro, GE CIMPLICITY
Certifications UL, CE, ATEX, IEC 61131-2 compliant
Form Factor Rack-mounted; 3U height; compatible with GE RX3i rack systems