Grid view List view

Showing 2821–2832 of 3716 results

UR8FH

¥6,208.00
Parameters and specifications:
Brand: GE (General Electric)
Model: UR8FH
Input voltage: 24VDC
Output voltage: 24VDC
Maximum output current: 10A
Operating temperature range: -40℃~70℃
Control scale: 40 points MR/MT
Built-in memory: 2K capacity EEPROM, no battery, no protection
CPU processing speed: 0.55~0.7μS/ basic instruction
Built-in positioning function: 2-axis independent 100kHz positioning function

IC660EBR101

¥4,152.00
Parameters and specifications:
Weight: 0.82 kg.
Channel update rate: 1 second, typical value.
Energy consumption: 4.6W Max.
Power consumption: 10.5 watts (although note that this value and “energy consumption” may vary, depending on usage).
Communication: USB-B interface.
Cable length: USB data cable length 5 meters.
Storage temperature: -40°C to +85°C
Series:
The IC660EBR101 is a product under the GE/GE Fanuc brand, part of its family of modules for industrial automation control systems or Distributed control systems (DCS).

IC200ALG264J

¥5,624.00
Parameters:
Input type: Voltage, current, thermocouple, RTD, resistor.
Input range: Depending on the input type, see the product manual for details.
Resolution: 16 bits.
Sampling period: 1ms.
Specifications:
Dimensions: 70mm x 35mm x 134mm.
Weight: About 0.2kg.
Operating temperature: -40℃~85℃.
Power supply voltage: DC 24V.
Power consumption: 2.5W.

IC200GBI001

¥6,205.00
Parameters and specifications:
Type: VersaMax communication module, Genius Network Interface Unit (NIU).
Transmission speeds up to 153.6kbaud are supported, with standard configurations including 153.6kbaud, 76.8Kbaud and 38.4Kbaud.
I/O capacity:
Each rack supports a maximum of eight I/O modules.
Supports a maximum of 8 racks, that is, 64 I/O modules.
Discrete input and output memory are 1024 points.
Analog input and output memory are both 128 bytes.
Scanning capability: Each scan supports 128 bytes of input and output.
Power consumption: 250 mA@4VDC and 10 mA@3.3mA.

IC693PWR331

¥6,203.00
Parameters and specifications:
Series: Series 90-30
Power type: PLC power module
Output voltage: 24V DC
Output current: up to 31 amps
Protection function: Support over voltage, over current, short circuit and other protection functions

IC200ALG260E

¥3,625.00
Parameters and specifications:
Type: Analog input module
Series: GE Fanuc Versamax series
Number of channels: 8 single-ended channels in a group
Voltage range: -10 to +10 volts DC, 0-10 volts DC
Current range: 4-20 mA
Update rate: 0.4 ms
Input filter response: 5.0 ms
Power consumption: 130 mA from the +5V bus
Resolution: 16 bits

IC695ETM001

¥3,652.00
Parameters and specifications:
Working voltage: 24VDC.
Operating temperature: -40℃ to 70℃.
Operating humidity: 5% to 95%.
Communication rate: 10/100 Mbps transmission rate is supported.
Communication protocol: Ethernet /IP.
Supported chip: FPGA.
Ethernet processor speed: 200 MHz.
Data transfer rate (RS-232 serial port) : 1200 bps to 115200 bps.
Size and weight:
Dimensions: 125mm x 72mm x 138mm.
Weight: About 0.5kg.

HE693RTU900

¥5,214.00
Parameters and specifications:
Control function: HE693RTU900 is a low-grade machine, with basic control function and general computing power. Its working speed is relatively low, and the number of input and output modules of the band is relatively small. For example, the S7-200 produced by the German company SIEMENS falls into this category.
Configuration: Parameters such as frame protocol, baud rate, parity and stop bits of HE693RTU900 can be changed by PLC software.
Features:
Communication capability: HE693RTU900 supports communication protocols such as Modbus and can exchange data with other devices.
Configuration flexibility: The HE693RTU900 can be easily configured and changed through PLC software.
Allows direct connection of sensors: The HE693RTU900 allows the RTD temperature sensor to be connected directly to the PLC without external signal processing.

IC695CHS012

¥4,521.00
Parameters and specifications:
Series: GE Fanuc RX3i PACSystems series.
Number of slots: 12.
Supported I/O types: PCI (IC695) and serial (IC694) based I/O.
Power specifications: Internal power supplies use 240 mA@5 VDC and 600 mA@3.3VDC.
Internal power consumption rating: 600 mA at 3.3 V DC and 240 mA at 5 V DC.

IC693ALG391

¥6,235.00
Parameters and specifications:
Brand: GE (General Electric), also mentioned GE Fanuc.
Series: 90-30 series PLC controller module.
Type: Analog output, current, 2 channels.
Input voltage: 10VDC.
Operating voltage: May vary according to the specific application, but is generally standard voltage.
Output frequency: not directly mentioned in different data, but PLC equipment usually has a variety of output frequency options.
Size and weight:
Weight: About 0.5KG.

DS200NATOG2A

¥6,252.00

Parameters:

  • Voltage: 24VDC
  • Weight: 2KG (approximately)

Specifications:

  • Dimensions: 8.8 x 3.6 x 4.7 inches (external)
  • Data Capacity: 4KB
  • Processing Speed: 10 MHz
  • Operating Temperature: 0 to 60°C
  • Operating Humidity: 0% – 95% non-condensing

IC695ALG600-AB

¥6,322.00

Parameters and specifications
Series: A family of universal analog input modules belonging to the GE Fanuc PACSystems RX3i PAC platform.
Input signal support: voltage, current, resistance and other input signals, and support thermocouple and resistance temperature detector (RTD).
Channel configuration: With two groups of four channels each, can be configured as any combination of input signals.
Supported signal range: including 0-20 mA, 4-20 mA, +/-20 mA current signal; +50mV, + 150mV, 0-5V, 1-5V, 0-10V, +10V voltage signal; 0 to 250/500/1000/2000/3000/4000 ohm resistance signal; PT 385/3916, N 618/672, NiFe 518, CU 426 RTD sensors; B, C, E, J, K, N, R, S, T thermocouple input.
Installation and configuration: Installed on an RX3i universal backplane, requires firmware version 2.80 or later and configured using Proficy Machine Edition (PME) version 5.0 SP1A LD-PLC Hotfix 1 or later.