Input voltage : 100-240V AC, suitable for most of the world voltage standard
Output voltage : 12V DC, providing stable DC power supply
The maximum output current : 2A, to meet the current requirements of a variety of equipment
Rated power : 24W, to ensure that the power adapter can be stable for a long time
working temperature : -20℃\~50℃, suitable for all kinds of environmental conditions
protection function : with overload protection, overheat protection, short circuit protection and other multiple safety features, to ensure the safety of
Input voltage : 100-240V AC
Output voltage : 12V DC
Maximum output current : 2A
Rated power : 24W
Working temperature : -20℃~50℃
protection function : with overload protection, overheat protection, short circuit protection and other multiple protection functions
Main purpose : 369-HI-0-M-0-0-0-0-e is a General Electric company 369 motor protection relay designed to protect and control motors and their supporting components, reduce troubleshooting time and extend system life
. Size
Approximate dimensions : H 11.5 “x x 5.5” x 8.5 “
Other descriptions also described as having a similar scale of 12 inches high x 5 inches wide x 8 inches long
Features: Provides equipment, motor and I/O control functions.
Microprocessor: Has four microprocessors, including the onboard Drive Control processor (DCP), local Area Network Control processor (LCP), Motor control processor (MCP), and Comotor processor (CMP). These processors are used to filter and process the signals on the card.
specification
Product type: Circuit board gas turbine card, automation imported parts.
Origin: USA.
Input voltage range: The input voltage range of the DS200FGPAG1A may vary depending on the search results. One says 12-48VDC, while another mentions that the device is rated at 220V for use in power measurement and power management applications. For the latter, however, it may refer to the voltage that the DS200FGPAG1A feeds into the grid when it acts as a smart meter, rather than the input voltage of the device itself.
Output voltage: When used as a power module or similar device, the DS200FGPAG1A may have an output voltage of 5VDC and a maximum output current of 10A.
Efficiency: greater than 90%.
Measurement accuracy: 0.2 (when used as a smart meter).
Analog output channels: 32 high quality analog output channels with 12-bit resolution
Output impedance: 0.8Ω
Output voltage range: unipolar (0 to +10V, 0 to +5V, zero to +2.5V) or bipolar (±2.5, ±5 and ±10V) software optional
Output current: can output or receive 10 mA at ±10V voltage
specification
Each output: A dedicated D/A converter (DAC)
Calibration and self-test: initiated by the VME bus system reset or by the execution of software commands
Offset and gain coefficients: During calibration, a table of offset and gain coefficients is compiled and stored in RAM
Industrial grade design: anti-vibration, anti-electromagnetic interference and durable, suitable for a variety of harsh industrial environments.
Modular design: easy to expand and upgrade, improve system flexibility and maintainability.
Multiple input and output channels: The ability to monitor multiple process variables and perform related operations to meet complex control needs.
Communication interface: Ethernet or serial communication interface that supports connection and communication with other devices or systems.
Function: Labeled as a power brake buffer, it is part of General Electric’s Mark V series.
Electrical specifications: Support constant torque 575 v AC for a 375 HP motor and variable torque 380 V AC for a 300 HP motor.
Connector type: Four-pin connector for connecting the power supply/interface board (IMCP) and DS200ITXDG1ABA board.
specification
Inverter and dynamic brake buffer board control: Control via power/interface board (IMCP).
Board mount: To be mounted externally, its dimensions must meet the worst switch requirements for dynamic braking IGBTs.
Size and weight
Weight: Approximately 0.8KG
Processor: Uses an 80386EX processor with a speed of 25MHz.
Memory: The maximum user program memory is 32K bytes.
Scan rate: The typical scan rate of a CPU is 0.22 ms /K.
Communication interface: Equipped with a built-in serial port supporting SNP/SNP-X slave protocol and a LAN port supporting multipoint, Ethernet, FIP, Profibus, GBC, GCM and GCM+ option modules.
Power requirements: 670 MA from +5 VDC power supply required.
Function support: Support shift register, override, battery backup clock, PCM/CCM compatibility, periodic subroutine interrupt function, floating point math, RAM and flash storage.
